Outboard Motors LD2 & LD3

The contractor shall supply and install two (2) 100HP outboard boat motors; one (1) for Lock and Dam 2 in Hastings, MN and one (1) for Lock and Dam 3 in Welch, MN. The US Army Corps of Engineers is willing to transport the 17 foot rescue boat for installation of the motors up to a distance of 50 miles from each Lock and Dam, if installation is to occur farther away than the stated 50 miles, it is the responsibility of the Offeror to arrange transport of the boat, and the cost of transport is to be included in the quoted price of the motors. The existing motor will be removed and retained by government staff.
2. NEEDS DESCRIPTION
The outboards are used to power the downstream rescue boat, its dependability is critical to prevent loss of life.
3. SPECIFICATIONS
The outboard motors shall be Suzuki 100HP or equal by meeting or exceeding the following requirements:
- 100 Horse power
- 4 stroke EFI
- 20" shaft
- Electric start
- Multiple engine control/with trim control
- Power trim
- Engine console mount control (with trim)
- Props
- Audible Overheat warning device
- Emergency stop switch
- Audible Low oil warning device
- Mounting hardware
- 12 foot wiring harness - Needs to fit engine controls.
- 12 foot cables
- Manufactures warranty
- Authorized service center within 75 miles
ALL QOUTES SHALL STATE MAKE AND MODEL OF OUTBOARD MOTOR THE VENDOR IS QUOTING, AND SHALL ALSO INCLUDE A CUT-SHEET/SPEC-SHEET AS WELL.
4. Trade In
No trade in
5. Delivery Due Date
The motors shall be delivered and installed on BOTH boats on or before 01 November 2017.
6. Shipment
The bid price shall include the cost of transporting and unloading to the destination site. Shipment shall be prepaid and made at the Contractor's expense.
Shipment addresses and point of contacts are:
1) U.S. Army Corps of Engineers
Lock & Dam 2
Attn: Brian Gray
Lock and Dam 2
1350 Lock and Dam Road
Hastings, MN 55033
651-290-5062
2) U.S. Army Corps of Engineers
Lock & Dam 3
Attn: Tim Tabery
Lock and Dam 3
4330 Lock and Dam Road
Welch, MN 55089
651-290-5062