one (1) Ordered Powder Lithography (OPL) 3D Printer
Award Notice Posted
- Solicitation number
- W911QX-18-T-0055
- Agency
-
ACC Aberdeen Proving Ground
Army Contracting Command, Department of Defense
- Awarded
- to Grid Logic Incorporated
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- W911QX-18-C-0018 Federal contract award
- NAICS code
- 333249 Other Industrial Machinery Manufacturing
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
See attached Redacted JandA.
Update #1 ·
one (1) Ordered Powder Lithography (OPL) 3D Printer
The proposed system met the following functionality requirements (Section C.1):
C.1.1 Shall construct part by the layer-wise addition of desired powder until completed.
C.1.2 Shall additively manufacture (also known as 3D printing) components without use of powder beds, high power laser/electron beam processing, and/or polymeric binders.
C.1.3 Shall be able to process multiple materials simultaneously- up to three (3) different powders
C.1.4 Shall be able to interrupt process and insert embedded components (e.g., sensors, spacers, etc.) and/or internal channels
C.1.5 Shall allow for part construction to be performed under standard atmospheric conditions (e.g., non-vacuum)
C.1.6 Shall contain a build area ranging from approximately 2x2 (inch) to as large as 10x10 (inch) through the rapid change of "build cartridges."
Files
| File | Type | Posted |
|---|---|---|
| Redacted_JandA.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Award Notice | |
| NOTICE OF INTENT TO SOLE SOURCE - Ordered Powder Lithography (OPL) 3D Printer | Award Notice | |
| Sources Sought for Ordered Powder Lithography (OPL) 3D Printer | Award Notice |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity