Little Goose Fish Ladder Cooling - Permanent Power

Added: Feb 10, 2017 5:58 pm Amendment 0007

Added: Dec 20, 2016 4:41 pm

Solicitation no. W912EF-17-B-0007

Added: Nov 15, 2016 4:15 pm Modified: Dec 14, 2016 11:33 amTrack Changes The proposed project will involve installation of a permanent power source for a 300-HP pump motor located in the forebay of Little Goose Dam, near the fish ladder exit. The power source must allow the pump to run continuously from 1 July through approximately 30 September each year.  The pump will be provided by the Government.  

The proposed power source will draw power from Units 1 through 4 via T01 and XJ07. This work would include tapping the feeder at the sectionalizing cabinet in the upstream navigation lock substation room for LSP2, installing a fused disconnect, step-down transformer, and variable frequency drive in that room, and route a conduit approximately 150 feet to the vicinity of the fish ladder exit.

All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1).

Solicitation is unrestricted. Solicitation Number W912EF-17-B-0007 will be posted to the FedBizOpps (FBO) website on or about 19 December 2016. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

A site visit will be offered approximately 2 weeks after the solicitation is posted. Refer to the solicitation for details regarding the site visit.

Place of Performance is the Little Goose Lock and Dam / 1001 Little Goose Dam Rd. / Dayton, WA 99328-8602

This will be a firm fixed-price construction contract. Magnitude of Construction is estimated between $100,000 and $250,000. A bid bond is required in the amount of 20 percent of the total bid price. Performance and Payment bonds in the amount of 100 percent of the total contract price are required in the bid price exceeds $150,000. The North American Industry Classification System (NAICS) code for this project is 238210 and the associated small business size standard is $15 million.

Important Note: The FedBizOpps Response Date listed elsewhere in this synopsis is for FedBizOpps archive purposes only. It does not necessarily reflect the actual bid opening date. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

When available, the solicitation documents for this project will be available via FedBizOpps.gov https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the "Add Me" to Interested Vendors" button in the listing for this solicitation on FedBizOpps.gov.

ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to Hillary.A.Morgan@usace.army.mil and Phyllis.L.Buerstatte@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site.

Added: Nov 15, 2016 4:15 pm Modified: Nov 15, 2016 4:24 pmTrack Changes The proposed project will involve installation of a permanent power source for a 300-HP pump motor located in the forebay of Little Goose Dam, near the fish ladder exit. The power source must allow the pump to run continuously from 1 July through approximately 30 September each year.  The pump will be provided by the Government.  

The proposed power source will draw power from Units 1 through 4 via T01 and XJ07. This work would include tapping the feeder at the sectionalizing cabinet in the upstream navigation lock substation room for LSP2, installing a fused disconnect, step-down transformer, and variable frequency drive in that room, and route a conduit approximately 150 feet to the vicinity of the fish ladder exit.

All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1).

Solicitation is unrestricted. Solicitation Number W912EF-17-B-0007 will be posted to the FedBizOpps (FBO) website on or about 30 November 2016. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

A site visit will be offered approximately 2 weeks after the solicitation is posted. Refer to the solicitation for details regarding the site visit.

Place of Performance is the Little Goose Lock and Dam / 1001 Little Goose Dam Rd. / Dayton, WA 99328-8602

This will be a firm fixed-price construction contract. Magnitude of Construction is estimated between $100,000 and $250,000. A bid bond is required in the amount of 20 percent of the total bid price. Performance and Payment bonds in the amount of 100 percent of the total contract price are required in the bid price exceeds $150,000. The North American Industry Classification System (NAICS) code for this project is 238210 and the associated small business size standard is $15 million.

Important Note: The FedBizOpps Response Date listed elsewhere in this synopsis is for FedBizOpps archive purposes only. It does not necessarily reflect the actual bid opening date. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

When available, the solicitation documents for this project will be available via FedBizOpps.gov https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the "Add Me" to Interested Vendors" button in the listing for this solicitation on FedBizOpps.gov.

ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to Hillary.A.Morgan@usace.army.mil and Phyllis.L.Buerstatte@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site.

Added: Nov 15, 2016 4:15 pm The proposed project will involve installation of a permanent power source for a 300-HP pump motor located in the forebay of Little Goose Dam, near the fish ladder exit. The power source must allow the pump to run continuously from 1 July through approximately 30 September each year.

The proposed power source will draw power from Units 1 through 4 via T01 and XJ07. This work would include tapping the feeder at the sectionalizing cabinet in the upstream navigation lock substation room for LSP2, installing a fused disconnect, step-down transformer, and motor starter in that room, route a conduit approximately 50 feet to the vicinity of the fish ladder exit.

All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1).

Solicitation is unrestricted. Solicitation Number W912EF-17-B-0007 will be posted to the FedBizOpps (FBO) website on or about 30 November 2016. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

A site visit will be offered approximately 2 weeks after the solicitation is posted. Refer to the solicitation for details regarding the site visit.

Place of Performance is the Little Goose Lock and Dam / 1001 Little Goose Dam Rd. / Dayton, WA 99328-8602

This will be a firm fixed-price construction contract. Magnitude of Construction is estimated between $100,000 and $250,000. A bid bond is required in the amount of 20 percent of the total bid price. Performance and Payment bonds in the amount of 100 percent of the total contract price are required in the bid price exceeds $150,000. The North American Industry Classification System (NAICS) code for this project is 238210 and the associated small business size standard is $15 million.

Important Note: The FedBizOpps Response Date listed elsewhere in this synopsis is for FedBizOpps archive purposes only. It does not necessarily reflect the actual bid opening date. The bid opening date will be contained in the solicitation and any solicitation amendments that may be issued.

When available, the solicitation documents for this project will be available via FedBizOpps.gov https://www.fbo.gov. NO CD's OR HARD COPIES WILL BE AVAILABLE. Bidders are responsible for checking the referenced page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to FedBizOpps.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the "Add Me" to Interested Vendors" button in the listing for this solicitation on FedBizOpps.gov.

ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with I-551 stamp or attached INS Form I-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form I-151 or I-551), Temporary Resident Card (INS Form I-688), Employment Authorization Card (INS Form I-688A), Reentry Permit (INS Form I-327), Refugee Travel Document (INS Form I-571), Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B). Send this information by email to Hillary.A.Morgan@usace.army.mil and Phyllis.L.Buerstatte@usace.army.mil. Foreign nationals must have received clearance prior to being granted access to the project site.