IQC on SLING, SMALL ARMS

NSN(s):  1005-01-562-9457
Item Description:  SLING, SMALL ARMS
Estimated Annual Quantity: 32,669
Unit of Issue:  EA
Destination Information:  VARIOUS DLA STOCKING LOCATIONS
Delivery Schedule:  90 days 
CAGE & Part Number:   (1VJU0) P/N: 100350301  
                                         (39EH3)  P/N 8342

( X  )  This acquisition is to establish an IDPO for NSN 1005-01-562-9457.  The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (3 year base plus option years) shall not exceed 5 years. 

( X  )  While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, and past performance as described in the solicitation.

Hard copies are not available.  Increments and delivery schedule will be noted on the RFQ. FOB Destination is required. Inspection/Acceptance requirements are Destination. 

The Small Business size standard is 500 employees.

The proposed contract is 100% set aside for small business concerns.

If you are interested in providing a quote, email Sunshine Brubaker at Sunshine.Brubaker@DLA.MIL or call (614) 692-5890. 

 


The item description for the item is below: 

DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS
SOLICITATION, THEREFORE SURPLUS MATERIAL WILL
NOT BE CONSIDERED. IF PRESENT IN THE
SOLICITATION, PROVISION 52.211-9003 AND CLAUSE
52.211-9000 ARE NOT APPLICABLE.
  END ITEM: M16 / M4 Family
  THIS ITEM IS A "DEFENSE ARTICLE"
  AS DEFINED IN AND SUBJECT TO THE
  INTERNATIONAL TRAFFIC IN ARMS
  REGULATIONS (22 C.F.R 120-30) AND THE ARMS
  EXPORT CONTROL ACT (22 U.S.C.A.
  2778-2779). ANY MANUFACTURER OR EXPORTER
  OF DEFENSE ARTICLES IS REQUIRED
  TO REGISTER WITH THE DIRECTORATE OF
  DEFENSE TRADE CONTROLS (DDTC),
  DEPARTMENT OF STATE.
  DOCUMENTARY EVIDENCE OF REGISTRATION
  MAY BE REQUIRED PRIOR TO AWARD.
  ADDITIONAL EXPORT RESTRICTIONS
  APPLY AS INDICATED HEREIN. FAILURE TO
  SUBMIT DIRECTORATE OF DEFENSE
  TRADE CONTROLS (DDTC) REGISTRATION WHEN
  REQUESTED WILL RESULT IN WITHDRAWAL
  OF QUOTES/OFFERS.

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE
DATA PACKAGE INCLUDING DATA FOR THE APPROVED
AND ALTERNATE PART FOR EVALUATION.

  _______________EXCEPTION DATA___________________
  THE TDP DOES NOT FULLY DISCLOSE
  THE COMPLETE TECHNICAL REQUIEMENTS THAT
  WOULD ALLOW THIS ITEM TO BE MANUFACTURED
  BY OTHER THAN THE FOLLOWING SOURCE(S):

  BEST MADE DESIGNS, LLC
  P.O. BOX 475
  MONAHANS, TX 79756
  CAGE: 1VJU0

  FIRE FORCE TACTICAL GEAR
  122-A E. FOOTHILL BLVD., UNIT #9
  ARCADIA, CA 91006
  CAGE: 39EH3

  _____________END OF EXCEPTIONS_________________


THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF
WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE
TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE
SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION,
OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS
OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS
PURSUANT TO INTERNATIONAL AGREEMENTS. 
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM
2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS
AVAILABLE AT THE WORLD WIDE WEB ADDRESS
HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATILE CREEK, MI 49017-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED
SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING
LICENSE AGREEMENT, TECHNICAL ASSISTANCE
AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE
PROCUREMENT AGREEMENT APPROVED BY THE
DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE
OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS
OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL
APPLICABILITY," AND/OR EAR PART 740 ARE
APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT
CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING
OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY
WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY
OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE
TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345
CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH
DATA UNLESS FURTHER DISSEMINATION OF THE
TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD
5230.25."

BEST MADE DESIGNS LLC   (1VJU0)   P/N  100350301
FIRE FORCE TACTICAL GEAR, INC.   (39EH3)   P/N  8342

 I/A/W   DRAWING NR 19200 12579607
REFNO
AMEND NR C     DTD 08/04/09
TYPE NUMBER

 I/A/W   DRAWING NR 19200 12993884
REFNO
AMEND NR F     DTD 08/15/12
TYPE NUMBER

I/A/W   DRAWING NR 19200 13014775
BASIC
AMEND NR B     DTD 08/28/12
TYPE NUMBER

I/A/W   DRAWING NR 19200 13014775
REFNO
AMEND NR      DTD 11/06/12
TYPE NUMBER

I/A/W   SPEC NR 19200 13014775
REFNO
AMEND NR B     DTD 08/28/12
TYPE NUMBER

I/A/W   DRAWING NR 19200 PRF13018850
REFNO
AMEND NR      DTD 10/11/07
TYPE NUMBER