IQC for Antenna

Added: Nov 24, 2014 11:39 am  

RESPONSE DATE:  Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP).

 

The solicitation will be available in DIBBS on or about its estimated issue date of  December 10, 2014.

DESCRIPTION:

 NSN(s): 5985-01-306-8110 Estimated Annual Quantity: 760 Each

              5985-01-308-8988  Estimated Annual Quantity: 3355 Each

 Delivery to various DLA Stock location with phased deliveries.  Both NSNs require First Article Test (FAT).  Delivery with FAT is 300 days.  Delivery if FAT is waived is 150 days.

 

Item Description:

 

NSN:  5985-01-306-8110
NAME:  ANTENNA ELEMENT

 SQAP013068110 APPLIES

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

FULL AND OPEN COMPETITION APPLIES.

IF THE APPLICABLE (OEM OR MILITARY) DRAWING,

SPECIFICATION, STANDARD, OR QUALITY ASSURANCE

PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY

LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER

SHALL BE REDUCED TO ZERO (0).  FOR EXAMPLE, IF

THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)

DEFECTS AND REJECT ON (4) DEFECTS, THE NEW

ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS

AND REJECT THE ENTIRE LOT ON (1) DEFECT.  EVEN

THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE

SAMPLE SIZE REMAINS THE SAME.

 DLAD 52.246-9004, PRODUCT VERIFICATION

TESTING, APPLIES. THIS CLAUSE IS A GOVERNMENT OPTION

THAT CAN ONLY BE INVOKED UPON THE COGNIZANT

CONTRACT ADMINISTRATION OFFICE NOTIFYING

THE CONTRACTOR THAT PVT SAMPLES ARE TO BE

SELECTED.

 FIRST ARTICLE TEST REQUIREMENTS

 THIS SUPPLEMENTAL QUALITY ASSURANCE PROVISION (SQAP) DELINEATES THE

FIRST ARTICLE AND PRODUCTION/ACCEPTANCE TEST REQUIREMENTS FOR NSN

5985-01-306-8110.  THE FIRST ARTICLE TEST REQUIREMENTS SPECIFIED IN THIS

SQAP ARE APPLICABLE WHEN FIRST ARTICLE TESTING IS SPECIFIED IN THE

CONTRACT.  THE PRODUCTION/ACCEPTANCE TEST REQUIREMENTS ARE APPLICABLE AT

ALL TIMES.

 IDENTIFICATION:  (80063) A3018230-1

 APPLICABLE DOCUMENTS:  (80063) A3148018  REV 'B' DTD 25 SEPT 1995 AND

ALL ASSOCIATED DOCUMENTS.  (80063) A3018230  REV 'E' DTD 30 APRIL 1997 AND ALL ASSOCIATED DOCUMENTS.

 THE FIRST ARTICLE SAMPLE SHALL BE MANUFACTURED IN THE SAME FACILITY

WHICH WILL BE UTILIZED FOR THE PRODUCTION QUANTITIES OF THE CONTRACT.

 FIRST ARTICLE CONTRACTOR TESTING:  CONTRACTOR SHALL TEST 9 SAMPLES IN

ACCORDANCE WITH SECTIONS 4.4 THRU 4.8.5 OF

(80063) A3148018  REV 'B' DTD 25 SEPT 1995 AS APPLICABLE TO REQUIREMENTS

OF ARMY DRAWING A3018230 AND ALL APPLICABLE DOCUMENTS.

 FIRST ARTICLE TEST REPORTS:  FIRST ARTICLE TEST REPORTS SHALL BE

PROVIDED TO THE GOVERNMENT WITHIN 60 DAYS OF AWARD DATE OF THE CONTRACT.

THE GOVERNMENT WILL HAVE 90 DAYS TO APPROVE/DISAPPROVE THE TEST REPORT.

FIRST ARTICLE TEST REPORTS SHALL BE APPROVED BY THE COGNIZANT QAR.  A

COPY OF THE APPROVED TEST REPORT SHALL BE SENT TO THE CONTRACT

ADMINISTRATOR LISTED ON THE CONTRACT.

 FIRST ARTICLE SAMPLE DISPOSITION:  FIRST ARTICLE TEST SAMPLES SHALL BE

RETAINED BY THE CONTRACTOR AND SHALL NOT BE SUBMITTED AS PART OF THE

ORDER QUANTITY.

 FAT APPROVAL BY SIMILARITY:  ANTENNAS OF SIMILAR CLASSIFICATION

MANUFACTURED ON THE SAME PRODUCTION LINE INVOLVING THE SAME PROCESS, MAY

BE GRANTED FAT APPROVAL BY THE ACQUIRING ACTIVITY PROVIDED THE

MANUFACTURER ALREADY HAS A ANTENNA OF EQUAL OR GREATER COMPLEXITY WITH

CURRENT FAT APPROVAL.

 IAW BASIC DRAWING NR 80063 A3018230

REVISION NR E   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013007

REVISION NR E   DTD 02/13/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013630

REVISION NR G   DTD 08/19/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3013657

REVISION NR L   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013851

REVISION NR H   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3014014

REVISION NR D   DTD 08/05/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013848

REVISION NR K   DTD 04/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3018080

REVISION NR F   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018418

REVISION NR B   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3012675

REVISION NR     DTD 06/29/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018230-1

REVISION NR D   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 AG00000600

REVISION NR C   DTD 06/04/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013845

REVISION NR G   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013849

REVISION NR J   DTD 04/06/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013660

REVISION NR H   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018202

REVISION NR A   DTD 12/13/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3013115

REVISION NR AK  DTD 07/12/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013122

REVISION NR J   DTD 02/14/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3013631

REVISION NR H   DTD 06/22/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013850

REVISION NR F   DTD 06/22/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018472

REVISION NR C   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3148018

REVISION NR B   DTD 09/29/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A313140

REVISION NR C   DTD 06/12/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013078

REVISION NR C   DTD 06/08/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013628

REVISION NR H   DTD 04/06/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013629

REVISION NR H   DTD 04/12/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013846

REVISION NR H   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018053

REVISION NR D   DTD 03/11/2010

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018419

REVISION NR E   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018230-1

REVISION NR     DTD 01/18/2013

PART PIECE NUMBER:

 IAW REFERENCE QAP 16236 SQAP013068110

REVISION NR     DTD 01/23/2013

PART PIECE NUMBER:

 

NSN:  5985-01-308-8988
NAME:  ANTENNA

 This item must be in compliance with the Reduction of

Lead in Drinking Water Act of 2011, revised Section

1417 of the Safe Drinking Water Act (SDWA or Act).

Compliance to the Reduction of Lead in Drinking Water

Act was effective on January 4, 2014.

 This item is considered lead free, which means:

(1) not containing more than 0.2 percent lead when

used with respect to solder and flux; and

(2) not more than a weighted average of 0.25 percent

lead when used with respect to the wetted surfaces of

pipes, pipe fittings, plumbing fittings, and fixtures.

CRITICAL APPLICATION ITEM

 THE GOVERNMENT RESERVES THE RIGHT TO WAIVE THE REQUIREMENTS FOR FIRST

ARTICLE TESTING FOR THOSE OFFERORS OF A PRODUCT WHICH HAS BEEN

PREVIOUSLY ACCEPTED BY THE GOVERNMENT AND HAS NOT BEEN FOUND TO BE

UNSATISFACTORY.

 MUST BE IAW ARMY (80063) DRAWING A3017899, REVISION "G", DTD 27 SEP 1995

SQAP013088988 APPLIES

 FIRST ARTICLE INSPECTION IS REQUIRED

CONTRACTOR FAT APPLIES.

PER FAR 52.209-3:

(A) THE CONTRACTOR SHALL TEST 9 UNIT(S)

PER DLAD 52.209-9017, ALT III DISPOSITION OF FIRST

ARTICLES:

FIRST ARTICLE TEST SAMPLES SHALL BE RETAINED BY THE CONTRACTOR AND SHALL

NOT BE SUBMITTED AS PART OF THE ORDER QUANTITY.

 FULL AND OPEN COMPETITION APPLIES.

 IF THE APPLICABLE (OEM OR MILITARY) DRAWING,

SPECIFICATION, STANDARD, OR QUALITY ASSURANCE

PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY

LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER

SHALL BE REDUCED TO ZERO (0).  FOR EXAMPLE, IF

THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3)

DEFECTS AND REJECT ON (4) DEFECTS, THE NEW

ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS

AND REJECT THE ENTIRE LOT ON (1) DEFECT.  EVEN

THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE

SAMPLE SIZE REMAINS THE SAME.

THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE

(ODS) IN THE DESIGN, MANUFACTURING, TESTING,

CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM

UNDER ANY MILITARY OR FEDERAL SPECIFICATION,

STANDARD OR DRAWING REFERENCED IN THIS ITEM

DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE

WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS

OBTAINED.  THIS PROHIBITION SUPERSEDES ALL

SPECIFICATION REQUIREMENTS BUT DOES NOT

ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.

THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS

DEFINED IN "FAR 11.001" OR TO PART-NUMBERED-

ONLY ITEMS.

 THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

 TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY

CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

 DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF

GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

 NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25."

 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

 IAW BASIC DRAWING NR 80063 A3017899

REVISION NR G   DTD 09/27/1995

PART PIECE NUMBER: A3017899-2

 IAW REFERENCE DRAWING NR 80063 A3012887

REVISION NR D   DTD 06/25/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013007

REVISION NR E   DTD 02/13/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013141

REVISION NR G   DTD 07/08/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013158

REVISION NR D   DTD 08/05/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013159

REVISION NR E   DTD 08/05/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013298

REVISION NR T   DTD 08/05/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013630

REVISION NR G   DTD 08/19/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013633

REVISION NR J   DTD 06/10/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013657

REVISION NR L   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013851

REVISION NR H   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013863

REVISION NR F   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013865

REVISION NR G   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013870

REVISION NR H   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013909

REVISION NR G   DTD 08/17/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3014013

REVISION NR D   DTD 08/05/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3014014

REVISION NR D   DTD 06/18/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018495

REVISION NR C   DTD 04/20/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018498

REVISION NR D   DTD 06/03/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013841

REVISION NR H   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013848

REVISION NR K   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013866

REVISION NR H   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018080

REVISION NR F   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018219

REVISION NR F   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018418

REVISION NR B   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018433

REVISION NR B   DTD 12/11/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018475

REVISION NR C   DTD 01/04/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017901

REVISION NR H   DTD 04/29/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017902

REVISION NR H   DTD 01/03/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3017905

REVISION NR F   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018218

REVISION NR H   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018230

REVISION NR E   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3012675

REVISION NR     DTD 06/29/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186822

REVISION NR     DTD 04/14/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018230-1

REVISION NR D   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3012992

REVISION NR K   DTD 06/18/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013618

REVISION NR M   DTD 06/06/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017903-1

REVISION NR G   DTD 09/26/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018215

REVISION NR F   DTD 09/28/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018218-1

REVISION NR G   DTD 09/27/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018492

REVISION NR E   DTD 09/28/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018492-1

REVISION NR D   DTD 10/02/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186817

REVISION NR A   DTD 09/29/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013129

REVISION NR K   DTD 06/12/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3012966

REVISION NR C   DTD 01/18/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013655

REVISION NR H   DTD 03/11/2009

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017899-2

REVISION NR     DTD 10/26/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013124

REVISION NR J   DTD 05/02/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013845

REVISION NR G   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013849

REVISION NR J   DTD 04/06/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013799

REVISION NR K   DTD 06/29/1976

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013108

REVISION NR H   DTD 09/23/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 MP-A37321

REVISION NR B   DTD 01/04/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013552

REVISION NR AE  DTD 02/10/2009

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013660

REVISION NR H   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018074

REVISION NR A   DTD 03/04/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3142167

REVISION NR A   DTD 09/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3142195

REVISION NR C   DTD 09/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3142196

REVISION NR C   DTD 09/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3142246

REVISION NR A   DTD 09/13/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3018201

REVISION NR A   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018202

REVISION NR A   DTD 06/12/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018434

REVISION NR B   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018438

REVISION NR A   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018524

REVISION NR A   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3019071

REVISION NR E   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3019237

REVISION NR B   DTD 12/13/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186823

REVISION NR     DTD 04/14/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186824

REVISION NR     DTD 04/14/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3186825

REVISION NR     DTD 09/21/2006

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186826

REVISION NR     DTD 04/14/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013115

REVISION NR AK  DTD 07/12/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013151

REVISION NR W   DTD 08/21/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013122

REVISION NR J   DTD 02/14/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013128

REVISION NR G   DTD 09/23/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3211803

REVISION NR B   DTD 03/23/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3211804

REVISION NR     DTD 02/07/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013631

REVISION NR H   DTD 06/22/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013850

REVISION NR F   DTD 06/22/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013864

REVISION NR F   DTD 06/06/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017900

REVISION NR C   DTD 06/10/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017903

REVISION NR G   DTD 09/28/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017907

REVISION NR F   DTD 09/27/1995

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017908

REVISION NR B   DTD 01/07/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017930

REVISION NR G   DTD 05/19/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018024

REVISION NR H   DTD 12/11/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018071

REVISION NR C   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018072

REVISION NR C   DTD 12/13/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018073

REVISION NR B   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018086

REVISION NR D   DTD 04/22/1993

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018095

REVISION NR A   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018220

REVISION NR C   DTD 12/19/1991

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018222

REVISION NR D   DTD 08/19/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018231

REVISION NR D   DTD 06/06/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018472

REVISION NR C   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018473

REVISION NR B   DTD 06/18/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018474

REVISION NR B   DTD 06/21/1990

PART PIECE NUMBER:

 IW REFERENCE DRAWING NR 80063 A3018494

REVISION NR D   DTD 11/27/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018494-1

REVISION NR C   DTD 06/08/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3142168

REVISION NR C   DTD 11/25/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3147948

REVISION NR B   DTD 11/15/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3186821

REVISION NR     DTD 04/15/1992

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018534

REVISION NR L   DTD 10/27/2007

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 AG0000600

REVISION NR C   DTD 09/21/1955

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3014011

REVISION NR L   DTD 12/21/2005

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3148018

REVISION NR B   DTD 09/29/1995

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP013088988

REVISION NR     DTD 10/12/2012

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013078

REVISION NR C   DTD 06/08/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013628

REVISION NR H   DTD 04/06/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013629

REVISION NR H   DTD 04/12/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013846

REVISION NR H   DTD 03/14/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018053

REVISION NR D   DTD 03/11/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80063 A3018419

REVISION NR E   DTD 04/30/1997

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 MP-A46387

REVISION NR     DTD 01/10/2006

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013683

REVISION NR BK  DTD 02/27/2007

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3013140

REVISION NR C   DTD 06/12/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3018070

REVISION NR C   DTD 06/13/1990

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3210897

REVISION NR C   DTD 04/07/1994

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 A3017899-2

REVISION NR     DTD 02/11/2014

PART PIECE NUMBER:

 IAW REFERENCE DRAWING NR 80063 E4GC201-007

REVISION NR     DTD 05/29/1995

PART PIECE NUMBER:

 

 

 

              

 

All responsible sources may submit an offer/quote which shall be considered.

  The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/.

 Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/.

Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software.   

Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257).

Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP.    

  One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.   

 Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date.

  The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  The total duration (base plus option years) shall not exceed  _5_ years. 

 While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.