Hose assembly, nonmetallic

The requirement for NSN 4720-01-567-8287 will be procured under an Indefinite Delivery Contract (IDC) using FAR Part 13 Simplified Procedures. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  A base period of 1 base year and two separate 1-year option years with a total duration not to exceed 3 years is anticipated. Deliveries are DLA Direct within 122 days of order. This solicitation will be issued as a 100% set aside for small business concerns.

Item Description:

HOSE ASSEMBLY,NONMETALLIC

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML).  THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML).  QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

FULL AND OPEN COMPETITION APPLY

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE W,

WITH A TOTAL SHELF LIFE OF ONE HUNDRED TWENTY

MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/

ORDER SHALL HAVE AT LEAST 85% (102 MONTHS) OF

THE SHELF LIFE REMAINING AT TIME OF DELIVERY.

SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF

MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE SHOWN AS

PART OF THE ITEM IDENTIFICATION DATA ON UNIT PACKS<(>,<)>

INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND

UNPACKED ITEMS. SHELF-LIFE MARKINGS SHALL INCLUDE

THE MANUFACTURED, CURED, ASSEMBLED, OR PACKED DATE

(APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST

DATE, AS APPROPRIATE.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12505644

REVISION NR A   DTD 11/10/2008

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-13444J

REVISION NR J   DTD 04/02/2019

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(2)

REVISION NR R   DTD 09/27/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12505644

REVISION NR     DTD 03/21/2019

PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:10  CLNG/DRY:1  PRESV MAT:00

WRAP MAT:CA  CUSH/DUNN MAT:00  CUSH/DUNN THKNESS:0

UNIT CONT:D3  OPI:O

INTRMDTE CONT:DO  INTRMDTE CONT QTY:AAA

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

F.O.B. Destination and Inspection/Acceptance at Destination is requested.  One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.  The AMC/AMSC for this item is 1G.  This means this part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100.

Various Increments Solicited:

FROM:   TO:

110 - 224

225 - 674

675 - 1124

1126 - and Up

Based on market research, this item is commercial and the Government is using the policies contained in FAR Part 13 for this solicitation. The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of March 233, 2020.  Hard copies of this solicitation are not available.

While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, past performance, and other evaluation factors identified in the solicitation. All offers shall be in the English language and US dollars. All interested suppliers may submit an offer.

DLA Internet Bid Board System (DIBBS) quotations are not acceptable for this solicitation. Offerors must complete the entire solicitation. Quotes must be submitted on a hard copy of the Request for Quote (RFQ), scanned, and emailed to Teresa.kershaw@dla.mil.