Hose, air duct

Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 10 of SF 18.

The requirement for NSN 4720-01-279-5150 will be procured under an Indefinite Delivery Contract (IDC) using FAR Part 13 Simplified Procedures. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.  A base period of 1 base year and two separate 1-year option years with a total duration not to exceed 3 years is anticipated. Deliveries are DLA Direct within 148 days of order. This solicitation will be issued as Unrestricted.

Item Description:

HOSE, AIR DUCT

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to

export-control of either the International Traffic in Arms regulations

(ITAR) or the Export Administration Regulations (EAR), and cannot be

exported without prior authorization from either the Department of State

or the Department of Commerce. Export includes disclosure of technical

data to foreign persons and nationals whether located in the United

States or abroad. This requirement applies equally to foreign national

employees and U.S. companies and their foreign subsidiaries. DFARS

252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control

technical data to DLA contractors that have an approved US/Canada Joint

Certification Program (JCP) certification, have completed the

Introduction to Proper Handling of DOD Export-Controlled Technical Data

Training and the DLA Export-Controlled Technical Data Questionnaire

(both are available at the web address given below), and have been

approved by the DLA controlling authority to access the

export-controlled data. Instructions for obtaining access to the

export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed

for use are required to have an approved JCP certification and have

been approved by the DLA controlling authority to access

export-controlled data managed by DLA. DLA will not delay award in

order for an offeror or its supplier to apply for and receive approval

by the DLA controlling authority to access the export-controlled data.

2.99-3.02 INCH ID, 8.30-9.09 INCH OVERALL LENGTH

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE W,

WITH A TOTAL SHELF LIFE OF ONE HUNDRED TWENTY

MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/

ORDER SHALL HAVE AT LEAST 85% (102 MONTHS) OF

THE SHELF LIFE REMAINING AT TIME OF DELIVERY.

SHELF LIFE MARKINGS REQUIRED PER 5.10.1 OF

MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE

SHOWN AS PART OF THE ITEM IDENTIFICATION

DATA ON UNIT PACKS, INTERMEDIATE CONTAINERS<(>,<)>

EXTERIOR CONTAINERS, AND UNPACKED ITEMS.

SHELF-LIFE MARKINGS SHALL INCLUDE THE CURED

DATE AND THE EXPIRATION DATE. THE EXPIRATION

DATE SHALL BE CALCULATED FROM THE CURE DATE

OF THE RUBBER/ELASTOMER.

FULL AND OPEN COMPETITION APPLY

IAW BASIC DRAWING NR 19207 12339265

REVISION NR D   DTD 07/13/2001

PART PIECE NUMBER: 12339265-8

IAW REFERENCE DRAWING NR 19207 12339265-8

REVISION NR     DTD 03/12/2018

PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:31  CLNG/DRY:1  PRESV MAT:00

WRAP MAT:00  CUSH/DUNN MAT:00  CUSH/DUNN THKNESS:0

UNIT CONT:D3  OPI:M

INTRMDTE CONT:E5  INTRMDTE CONT QTY:100

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

F.O.B. Origin and Inspection/Acceptance at Origin is requested. 

One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979.

All offers shall be in the English language and in U.S. dollars.

All interested suppliers may submit an offer. 

The AMC/AMSC for this item is 1G.  This means this part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100.

Various Increments Solicited:

FROM:   TO:

850 - 1649

1650 - 4999

5000 - 8359

8360 - and Up

Based on market research, this item is commercial and the Government is using the policies contained in FAR Part 13 for this solicitation.

The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of April 20, 2020.  Hard copies of this solicitation are not available.

While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, past performance, and other evaluation factors identified in the solicitation. All offers shall be in the English language and US dollars. All interested suppliers may submit an offer.

DLA Internet Bid Board System (DIBBS) quotations are not acceptable for this solicitation. Offerors must complete the entire solicitation. Quotes must be submitted on a hard copy of the Request for Quote (RFQ), scanned, and emailed to Teresa.kershaw@dla.mil.