GE Aviation Systems Limited LCAC 100 Series Tooling Configuration

The Government intends to award a firm fixed price purchase order on a sole source basis to GE Aviation Systems Limited (CAGE Code U7387). This acquisition will be conducted using simplified acquisition procedures with a total estimated value of $250,000. The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This purchase will be funded with FY18 funds. 10 U.S.C. 2304(c)(1). Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements FAR 6.302-1(b)(1)(ii).

PART NUMBER DESCRIPTION QTY
697167641 BOLT 32
750420322 SLAVE O-RING 50
DAPT02-0086-00 CROSSHEAD TORQUE TOOL 1
DAPT02-0093-00 HUB BUILD STAND 1
DAPT02-0095-00 GREASE ADAPTOR 1
DAPT60-0081-00 PROPELLER BUILD STAND 1
DAPT60-0428-00 BUILD MANDREL 1
DAPT60-0439-00 BLADE BAT 2
DAPT60-0441-00 PISTON SEAL KEEP RING 1
DAPT60-0443-00 BLADE DYNAMIC SEAL INSTALLATION TOOL 1
DAPT60-0444-00 PISTON BOLT REACTION TOOL 1
DAPT60-0445-00 BALL ASSEMBLY/EXTRACTOR TOOL 1
DAPT60-0447-00 SPRING RING ASSEMBLY TOOL 1
DAPT60-0449-00 TRANSFER SLEEVE LOCATION TOOL 1
DAPT60-0452-00 RING ROTATOR 1
DAPT60-0453-00 INSTALLATION - BALL RAKE 1
DAPT60-0454-00 KEEPER RING 1
DAPT60-0457-00 BLADE CLAMP 1
DAPT61-0038-00 RING NUT SPANNER 1
DAPT61-0039-00 PRELOAD REACTION SPANNER 1
DAPT61-0040-00 PRELOAD SPANNER 1
DAPT64-0139-00 TEST FIXTURE 1
DAPT64-0141-00 OIL DELIVERY TUBE(PROP PAT) DUMMY 1
DAPT64-0142-00 PRESSURE TEST SAFTEY CAP 1
DAPT64-0143-00 HYDRAULIC TEST BLOCK 1
DAPT64-0146-00 BLANKING/SETTING BAR 1
DAPT64-0147-00 OIL TRANSFER UNIT FIXTURE 1
DAPT65-0078-00 INSTALLATION BULLET 2
DAPT65-0126-00 OIL TRANSFER TUBE EXTRACTOR 1
DAPT69-0039-00 PLUG INSTALLATION TOOL 1
DAPT69-0055-00 SLAVE NUTS AND WASHERS 24
DAPT69-0056-00 CLINOMETER 1
DAPT69-0058-00 DYNAMIC SEAL ASSEMBLY BULLET 2
DAPT69-0059-00 DYNAMIC SEAL ASSEMBLY CONE 1
DAPT70-0050-00 HUB ASSEMBLY LIFTING ASSEMBLY 1
DAPT70-0051-00 LIFTING EQUIPMENT (VERTICAL/HORIZONTAL) 1
P901616 COPPER WASHER 50
TE9250 PORTABLE HYDRAULIC TEST RIG 1
TE9503 HYDRAULIC TEST RIG 1
TE9505-1 TEST CABLE 1

These required items are needed in order to conduct LCAC-100 series craft complete propeller blade assembly maintenance. With the propeller blade assembly, a product of GE Aviation Systems Limited, no other source will meet the requirements needed to maintain the craft's propeller system. GE Aviation Systems Limited holds the proprietary data, tooling configuration, and access to the required supplier baseline to provide the proposed configuration. The government's interests for the LCAC-100 series propeller maintenance tooling configuration will be seriously compromised if alternate sources are developed to complete the list of items. Therefore, it is in the government's best interest to award this action on a sole source basis.

The Contracting Officer has determined that the order represents the best value and results in the
lowest overall cost alternative (considering price, special features, administrative costs, etc.) to
meet the Government's needs.

For the reasons specified in paragraph 4 above, GE Aviation Systems Limited is the only brand
that can meet the Government's needs. This requirement will be synopsized in the government
point of entry fbo.gov.

.