Food service equipment

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 0010982115 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-95. The associated North American Industrial Classification System (NAICS) code for this procurement is 335221 with a small business size standard of 750.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2017-03-17 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT RUCKER, AL 36362

The MICC Fort Rucker requires the following items, Brand Name or Equal, to the following:
LI 001: Tilting Skillet
FFP
Southbend Model BLGM-40, tilting skillet, gas, 40 gallon, manual tilt, electronic
ignition, high temp safety cut off, removable pour strainer, stainless steel
construction, tubular legs, adjustable bullet feet front, adjustable flanged feet rear,
125000 BTU, CSA, NSF, CE, natural gas, 120V/50/60/1 ph, cord and plug., 1, EA;
LI 002: Multifunction Cooker
FFP
Legion Model SK10-11, skittle multi-function cooker/steam/grill/boil/fry/roast,
electric, 10 degree tilt, capacities (10) 12" x 20" x 2.5" pan, 8 cooking baskets, 33.5
gallon kettle/70 lb. oil, adjustable thermostat, 1-1/2" draw off valve, stainless steel
construction, adjustable flanged feet, 14.4kw, 208V/3 ph/40 amp, food holder pan
under draw off, insulated sides and bottom, patented 304 s tainless seam welded
capsule lid, single ball valve w/48"s flexible spray hose assembly., 1, EA;
LI 003: Piper Cantilevered Dispenser
FFP
Piper Cantilevered Tray & Silverware Dispenser, Model ATCA-ST-OSW8-1418,
stainless steel, removable front panel, stainless ste el sloped overhead type,
enclosed on all 4 sides, 8 openings for round silverware cylinders, four 4" diameter
heavy duty swivel casters w/non-marking rubber tires., 12, EA;
LI 004: Potato Peeler
FFP
Hobart 6460 Potato Peeler, stainless steel housing, 220V, carbide-abrasive disk,
heavy duty hopper cover, stainless steel drive shaft, heavy duty motor, 1HP, v-belt
direct speed drive, NSF approved removable lexan liner, synchronous 5 minute
timer (single phase only), disposer stand., 1, EA;
LI 005: Metromax Shelving
FFP
MetroMax Shelving, 24" x 72" x 74", corrosion proof polymer mats, epoxy coat
steel frame, 4 wedge connectors, adjustable shelves, in terchangeable shelves and
posts, patented corner release, antimicrobial product protection. 25 plastic w/metal
frame shelving, 20 posts 74"H, 10 Stem caster swivels, 5" diameter, 1 1/4" wide
face, 10 stem caster brakes, 5" diameter, 1 1/4" wide face, high modulus donut
wheel., 5, SETS;
LI 006: Metromax Shelving
FFP
MetroMax Shelving, 24" x 60" x 67" open grid shelves, microban antimicrobial
protection, posts, 4 swivel rubber casters (2 braked), epoxy coat steel frame., 7, SETS;
LI 007: Metromax Shelving
FFP
MetroMax Shelving 24" x 48" x 67, open grid shelving, microban antimicrobial
protections, 4 posts, 4 swivel rubber casters (2 braked), epoxy coat steel frame., 12, SETS;
LI 008: Buffalo Chopper
FFP
Hobart 84186-2 Buffalo Chopper Food Processor without #12 hub-1hp, 18"
stainless steel bowl, 20 RPM bowl rotation, 1 hp motor, 115/60/1,, 1, EA;
LI 009: Pulper Waste
FFP
WasteXpress WX500 5HP, 700 lb capacity, NEMA 4X stainless steel, 208V/3ph,
Food Waste Reduction System, 5HP WasteXpress grinder w/factory installed 3" to
2" waste outlet reducer, NEMA 4X WX101A control panel, dewatering unit, #6
collar adaptor for welding into trough or sink, splash baffle, disposer mount,
syphon breaker, 5GPM flow control valve, magnetic silver saver, 10 gallon waste
bin, two 24V water solenoids, 1, EA;
LI 010: Dining Room Chair
FFP
Laser cut logo back, padded seat, Naugahyde Neo 78 Indigo; Frame powdercoat
burnt nickel., 96, EA;
LI 011: Dining Room Table
FFP
30 x 96 rectangle with (3) 0522 tbases dining ht wilsonart 4838-38 Antique Roca,
maple bullnose edge stained to match Huntington maple., 12, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, MICC Fort Rucker intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Rucker is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition.

The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far.

The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov.

New equipment ONLY, NO remanufactured or used products. No "GREY" market items.

Bid MUST be good for 30 calendar days after submission

FOB Destination CONUS (CONtinental U.S.)

No partial shipments unless otherwise specified at time of order

In accordance with DFARS 252.232-7003, “Electronic Submission of Payment Requests and Receiving Reports”, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under “about WAWF”. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

Any EQUAL offer submitted is required to list the detailed specifications of their offer within their line item details. Additional attachments may also be emailed to clientservices@fedbid.com