Fluorescent Inspection System

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures found at FAR 13, as supplemented with the additional information included in this notice.  The announcement constitutes the only solicitation; a written solicitation will not be issued. 

The solicitation number is W50S8E20Q0004 and is issued as a Request for Quote (RFQ). This solicitation documents and incorporates provisions and clauses in effect through FAC 2020-08, effective August 13, 2020. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far/ and http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html.

The NAICS code is 334519 and the Small Business Standard is 500 employees. Please identify your business size in your response based on this standard. This procurement is classified as 100% set aside for small business concerns.  The Small Business Office concurs with the set-aside decision.

The 106th Rescue Wing of the New York Air National Guard requests responses from qualified sources capable of providing a Fluorescent Inspection System.

01 EACH: Fluorescent Inspection System-  Size 5, designation PT-48, Frame Size 48" long x 34" wide x 36" height, minimum usable tank size 43: long x 29" wide x 26" deep.

Stationary Inspection Equipment - General Purpose. The type of equipment most frequently used in fixed installations consists of a series of modular workstations. At each station an inspector performs a specific task. The number of stations in a processing line varies with the type of penetrant method used. A penetrant line will typically have the following stations:

• Penetrant dip tank.

• Emulsifier/remover (Methods “B” and “D”) dip tank. (This station is not applicable for Method “A” Method“D”

systems SHOULD include a rinse station prior to the remover tank.)

• Rinse station with UV-A lamp.

• Developer tank (if liquid is used).

• Drying oven.

• Developer tank (if dry-powder is used).

• Inspection booth with UV-A lamp.

T.O. 33B-1-1 Chapter 2, Section III liquid penetrant inspection equipment.

This procurement will be issued as a Firm Fixed Price (FFP) contract.