F100-220/220E Compressor Fan Blades PWA 46 D-GUN Plasma Application

Pre-solicitation Notice/Synopsis:
F100-220/220E Compressor Fan Blades PWA 46 D-GUN Plasma Application

Estimated issue date & estimated closing/response date: Issued 24 Oct 14, Closes: 7 Nov 14

Purchase Request #: FD2030-13-02440

Service/Spare/Repair/OH: Repair - Plasma application

RMC: R2

Item: CLIN 0001 / 1001
Single NSN: 2840-01-028-8004NZ / Single PIN: 4081931
Set NSN: 2840-01-503-0962NZ / Set PIN: 4081941
Description: Blade set of 2 blades each, Compressor,
1st stage
Size/Dimension of each blade:
Overall width: 2.904 inches
Overall wall thickness: 1.388 inches
Overall height: 11.0 inches

Fit/Form/Function: For the F100-220/220E engine inlet fan module 1st stage compressor rotor. The item is a set of two each blades of 19 sets supplying 1st stage compressed air as part of an axial flow compression system.

Predominant material: Titanium Alloy
Sole source to PAS Technologies due to proprietary plasma gun for application

Item: CLIN 0002 / 1002
Single NSN: 2840-01-524-5424NZ / Single PIN: 4081972
Set NSN: 2840-01-503-9063NZ / Set PIN: 4081982
Description: Blade set of 2 blades each, Compressor,
2nd stage
Size/Dimension of each blade:
Overall width: 1.983 inches
Overall wall thickness: 0.428 inches
Overall height: 9.226 inches

Fit/Form/Function: Fits on the F100-220/220E engine inlet fan module 2nd stage compressor rotor. The item is a set of two each blades of 30 sets supplying 2nd stage compressed air as part of an axial flow compression system.

Predominant material: Titanium Alloy
Sole source to PAS Technologies due to proprietary plasma gun for application

Item: CLIN 0003 / 1003
Single NSN: 2840-01-434-6967NZ / Single PIN: 4084013
Set NSN: 2840-01-434-6916NZ / Set PIN: 4084093
Description: Blade set of 2 blades each, Compressor,
3rd stage
Size/Dimension of each blade:
Overall width: 2.161 inches
Overall wall thickness: 0.694 inches
Overall height: 6.665 inches

Fit/Form/Function: Fits on the F100-220/220E engine inlet fan module 3rd stage compressor rotor. The item is a set of two each blades of 20 sets supplying 3rd stage compressed air as part of an axial flow compression system.

Predominant material: Titanium Alloy
Sole source to PAS Technologies due to proprietary plasma gun for application

Total Contract Line Item Quantity:
CLIN 0001: Best Estimated Quantity 300 sets
CLIN 0002: Best Estimated Quantity 300 sets
CLIN 0003: Best Estimated Quantity 300 sets
CLIN 1001: Best Estimated Quantity 2,000 sets
CLIN 1002: Best Estimated Quantity 3,000 sets
CLIN 1003: Best Estimated Quantity 300 sets

Application (Engine or Aircraft): F100 engines on the F15 and F16 aircraft

Destination: FB2039, Tinker AFB, OK 73145

Required Delivery: 20 per month beginning 30 days after receipt of funded order and/or
reparable assets, whichever is later.
This will be a Firm-Fixed Price, Requirements contract.

Export Control: N/A

UID: Note to Contractor: If unit price exceeds $5,000 then UID requirements will apply.

Important Information:
The proposed contract action is for services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1.
Qualification requirements: Sources must be qualified prior to being considered for award.
Qualified Source: PAS Technologies Inc. (4GMJ6)
PAS Technologies Inc. is currently the only approved source for full repair of the subject fan blades.

Sources must be qualified for the full repair in order to process subject fan blades for PWA 46 application using D-GUN technology to ensure the integrity of the part throughout the entire repair process.

Qualification requirements are available for this acquisition through the Source Development Office. For further information concerning the source approval process, please contact the following office in writing:
OC-ALC/BC
Attn: Source Development Office
3001 Staff Drive, Ste IAG85A
Tinker AFB OK 73145-3009

Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1.

All responsible sources meeting qualification requirements may submit a proposal which shall be considered by the agency.

This notice of intent is not a request for competitive proposals.

Specifications, plans, or drawings relating to the procurement described are not available and cannot be furnished by the Government.

A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.

Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

The approximate issue date of the solicitation will be 10 Nov 2014 with a response date of 28 Nov 2014

The solicitation will be available for download on the release date from www.fedbizopps.gov.
Hard copies of the solicitation will not be sent from this office.

Questions concerning this synopsis or subsequent solicitation can be directed to Abby Schultz at abby.schultz@us.af.mil