Electrical - Cable and Conduit Installation
Award Notice Posted
- Solicitation number
- W9127N-17-Q-0059
- Agency
-
ENDIST Portland
US Army Corps of Engineers, Department of Defense
- Awarded
- to Pick Electric, Inc.
- Set-aside
- Total Small Business
Opportunity facts
- Contract number
- W9127N17P0124 Federal contract award
- NAICS code
- 238210 Electrical Contractors and Other Wiring Installation Contractors
- PSC
- Not on record
- Place of performance
- Usace Portland District 333 SW 1st Avenue Portland, Oregon 97204, United States
Notice details come from SAM.gov. Updated .
Notice text
3 versions
Update #3 · Latest ·
16 AUG 17 - POSTED AMENDMENT 0001 TO ADD BIDDER INQUERY QUESTIONS AND ANSWERS TO THE SOLICITATION AND EXTEND THE QUOTE DUE DATE TO 22 AUG 17 BY 12:00 PM PACIFIC TIME
ATTACHED IS THE FINAL SOLICITATION (WITHOUT THE WATER MARK) FOR OFFERORS TO USE FOR THIS SOLICITATION. DISREGARD THE DRAFT COPY. IT WAS PREVIOUSLY ATTACHED BY MISTAKE.
The US Army Corps of Engineers, Portland District, Contracting Division, 333 SW 1st Avenue, Portland, Oregon 97204 is issuing a Request for Quote (RFQ) to procure services to install cable and conduit as part of the Applegate Dam Instrumentation Upgrades. This solicitation is a total set-aside for small businesses under NAICS 238210.
The location of this work shall be conducted at the Applegate Dam and Reservoir near Jacksonville, Oregon, for the Corps of Engineers Rogue River Basin Project. The Period of Performance (POP) will be from the date of award through November 30, 2017.
The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and other items and services necessary to perform the work for installation of rigid metal conduit (RMC), junction boxes, read-out boxes and data cable at the eastern side of the Applegate Dam and western side of the Applegate Dam. The Contractor shall also design and install posts into the ground at each junction box and securing of the boxes to the posts. There will be two separate interconnected systems that terminate at the two different locations of the dam.
All installations shall meet requirements as stated in the NFPA 70 National Electric Code and IEEE C2 National Electrical Safety Code. All components of a vertical assembly will be rated by the manufacture to withstand 150 mph wind loading in accordance with TIA-222.
For further details reference the Performance Work Statement (PWS) in the solicitation.
Responses to the solicitation will be sent via email to: dawn.r.simpson@usace.army.mil
Responses are to include:
1) Vendor name, address, point of contact, phone number, and email address
2) Vendor quotes for work described and a signed solicitation
3) Vendor to provide submittals to support the quote
Point of Contact for small business questions or assistance is Carol McIntyre, the Portland District Deputy for Small Business, at email carol.a.mcintyre@usace.army.mil or 503-808-4602.
Update #2 ·
ATTACHED IS THE FINAL SOLICITATION (WITHOUT THE WATER MARK) FOR OFFERORS TO USE FOR THIS SOLICITATION. DISREGARD THE DRAFT COPY. IT WAS PREVIOUSLY ATTACHED BY MISTAKE.
The US Army Corps of Engineers, Portland District, Contracting Division, 333 SW 1st Avenue, Portland, Oregon 97204 is issuing a Request for Quote (RFQ) to procure services to install cable and conduit as part of the Applegate Dam Instrumentation Upgrades. This solicitation is a total set-aside for small businesses under NAICS 238210.
The location of this work shall be conducted at the Applegate Dam and Reservoir near Jacksonville, Oregon, for the Corps of Engineers Rogue River Basin Project. The Period of Performance (POP) will be from the date of award through November 30, 2017.
The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and other items and services necessary to perform the work for installation of rigid metal conduit (RMC), junction boxes, read-out boxes and data cable at the eastern side of the Applegate Dam and western side of the Applegate Dam. The Contractor shall also design and install posts into the ground at each junction box and securing of the boxes to the posts. There will be two separate interconnected systems that terminate at the two different locations of the dam.
All installations shall meet requirements as stated in the NFPA 70 National Electric Code and IEEE C2 National Electrical Safety Code. All components of a vertical assembly will be rated by the manufacture to withstand 150 mph wind loading in accordance with TIA-222.
For further details reference the Performance Work Statement (PWS) in the solicitation.
Responses to the solicitation will be sent via email to: dawn.r.simpson@usace.army.mil
Responses are to include:
1) Vendor name, address, point of contact, phone number, and email address
2) Vendor quotes for work described and a signed solicitation
3) Vendor to provide submittals to support the quote
Point of Contact for small business questions or assistance is Carol McIntyre, the Portland District Deputy for Small Business, at email carol.a.mcintyre@usace.army.mil or 503-808-4602.
Update #1 ·
The US Army Corps of Engineers, Portland District, Contracting Division, 333 SW 1st Avenue, Portland, Oregon 97204 is issuing a Request for Quote (RFQ) to procure services to install cable and conduit as part of the Applegate Dam Instrumentation Upgrades. This solicitation is a total set-aside for small businesses under NAICS 238210.
The location of this work shall be conducted at the Applegate Dam and Reservoir near Jacksonville, Oregon, for the Corps of Engineers Rogue River Basin Project. The Period of Performance (POP) will be from the date of award through November 30, 2017.
The Contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and other items and services necessary to perform the work for installation of rigid metal conduit (RMC), junction boxes, read-out boxes and data cable at the eastern side of the Applegate Dam and western side of the Applegate Dam. The Contractor shall also design and install posts into the ground at each junction box and securing of the boxes to the posts. There will be two separate interconnected systems that terminate at the two different locations of the dam.
All installations shall meet requirements as stated in the NFPA 70 National Electric Code and IEEE C2 National Electrical Safety Code. All components of a vertical assembly will be rated by the manufacture to withstand 150 mph wind loading in accordance with TIA-222.
For further details reference the Performance Work Statement (PWS) in the solicitation.
Responses to the solicitation will be sent via email to: dawn.r.simpson@usace.army.mil
Responses are to include:
1) Vendor name, address, point of contact, phone number, and email address
2) Vendor quotes for work described and a signed solicitation
3) Vendor to provide submittals to support the quote
Point of Contact for small business questions or assistance is Carol McIntyre, the Portland District Deputy for Small Business, at email carol.a.mcintyre@usace.army.mil or 503-808-4602.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| Electrical - Cable and Conduit Installation | Award Notice | |
| This notice | Award Notice |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity