Elbow, Tee, & Valves

1.    This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
2. Solicitation number 2125405Y152139316 applies and is used as a Request for Quote (RFQ).   This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-05, dated 22 May 2024.
3. It is anticipated that a Best Value purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
4. Best Value will be evaluated by who can provide the complete requirement, who meets our required time frame and by price.
5. All vendors providing a quotation must either have an active SAM.Gov registration or provide proof they have submitted their entity for registration.
6. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.
7. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.
8. The United States Coast Guard Surface Forces Logistics Centerhas a requirement for the following items:

All quotes shall be emailed to Shannon Carter via Shannon.R.Carter@uscg.mil and shall be received no later than 09/25/25 at 12:00 PM (Eastern). All emailed quotes shall have 2125405Y152139316 in the subject of the email.

Vendor Information:

Entity Name

Entity Unique Entity ID

Entity Address

Entity POC

Entity Phone Number

POC Email Address

Vendor shall provide: 

ITEM 1

DESCRIPTION: ELBOW, 6" IPS, SHORT RADIUS, 45 DEGREE FLOW, 90/10 CU-NI, BUTT WELD, CLASS 200

QUANTITY: 1 EA

NSN: 4730 01-LG8-8715

PART NUMBER(s): 133065, 88104700, 810-1385880

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 2

DESCRIPTION: ELBOW, 5", ROUND DUCT, 90 DEGREES, 20 GAUGE GALVANIZED STEEL, DIE STAMPED

QUANTITY: 6 EA

NSN: 4520 01-LG0-5081

PART NUMBER(s): JE90-105G4W

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 3

DESCRIPTION: ELBOW, 5" ROUND DUCT, 30 DEGREES, SEGMENTED, SLIP FIT, 20 GAUGE GALVANIZED STEEL

QUANTITY: 1 EA

NSN: 4520 01-LG0-5078

PART NUMBER(s): JE30-205G4W

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 4

DESCRIPTION: VALVE, 1/2" FNPT, BALL, 2 PIECE BRONZE BODY, SST BALL AND STEM, 150#SWP, 600#WOG, HANDLE TO BE IN LINE OF FLOW

QUANTITY: 148 EA

NSN: 4820 01-LG4-2134

PART NUMBER(s): 70-143-01, 8503-0050

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 5

DESCRIPTION: VALVE, 2" IPS GATE, BRZ BODY, MONEL TRIM, 400 PSI W.O.G. @ 150 DEGREE F, 200 PSI STEAM @ 425 DEGREE F, RENEWABLE SEAT RINGS, RISING STEM, THREADED BONNET, SIL-BRZG UNION ENDS, SPECIAL FEATURE: VALVE SHALL HAVE 3 BUNA-N O-RINGS PACKED IN A BAG W/INSTRUCTIONS FOR OIL SERVICE

QUANTITY: 9 EA

NSN: 4820 00-483-0677

PART NUMBER(s): 138714-8, 803-1385714-8, 376-2IN

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 6

DESCRIPTION: VALVE, 2" NPS, GATE, SIL-BRZ UNION END, 400 PSI WOG, NON-RISING STEM, THREADED BONNET, NITRILE O-RING, SOLID WEDGE

QUANTITY: 24 EA

NSN: 4820 01-LG4-4424

PART NUMBER(s): 1146-009, 1385714-8

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 7

DESCRIPTION: TEE, 4" IPS, 90/10 COPPER/ NICKEL, CLASS 200 BUTT WELD

QUANTITY: 1 EA

NSN: 4730 01-LG9-0326

PART NUMBER(s): 128109, 5202611

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

ITEM 8

DESCRIPTION: TEE, 3" X 3" X 2" IPS, SIL-BRZG, BRZ, 150 PSI, GROOVED, FURNISHED WITH 3 EACH BRAZING RINGS PACKAGED WITH TEE

QUANTITY: 4 EA

NSN: 4730 00-LG2-0618

PART NUMBER(s): 5021-498

UNIT PRICE:

LINE TOTAL:

ESTIMATED DELIVERY DATE:

* Delivery address and terms stated below. *

* Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing.

*Any proposed substitutions must be accompanied by a Specification Sheet to undergo evaluation by the requiring officials for compatibility to the Requirement. *

*All Deliveries are Required to by 11/01/25*

** Total cost shall have delivery and any Freight charges included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 7:00AM to 1:00PM.

Invoicing In IPP

It is a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG Purchase Order number, vendor’s invoice number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. To gain access please indicate if you don’t have an account so the issuing office can establish one for you.

FAR Clauses

This order is subject to but is not limited to the following Federal Acquisition Regulations:

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

52.204-26 Covered Telecommunications Equipment or Services-Representation.

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.

52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.

52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.