Door, Vehicular

DLA Land & Maritime is preparing to solicit a long term contract for the NSN listed below.  The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All of this information can be submitted to steven.dalton@dla.mil.  Phone 614 692-2872. We thank you in advance for your assistance.

The requested items must be manufactured IAW the approved drawing as listed below.

Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.

 

NSN: 2510014505482

 

DOOR,VEHICULAR

 

EXCEPTION DATA:

MIL-STD-1261 WELDMENT CALLED OUT ON DRAWING 12340244

HAS BEEN REPLACED BY TACOM DRAWING 12479550.

 

This procurement (drawing #s 12340245 & 12340201) requires the use of

FEDSTD- 191, test method 5671. Some test methods in FED-STD-191 require

the use of Class I Ozone Depleting Substances (ODS). Method 5761 does

not require ODS. Use of any other test method(s) within this specification requires

prior government approval.

 

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

 

 

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

 

FAR CLAUSE 52.246-11 APPLIES.  A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008 (EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008; OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008 (EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

 4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual, [excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2 Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internal audit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING

AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML

COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE

APPLICABLE QPL(S)/QML(S).

 

QUALITY ASSURANCE PROVISION

 

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

 TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY

CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER

74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

 NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25."

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED.  THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE.  THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE."

IAW BASIC DRAWING NR 19207 12340245

REVISION NR M   DTD 04/17/2007

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340192

REVISION NR     DTD 06/20/1986

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12301363

REVISION NR F   DTD 02/10/1998

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12301365

REVISION NR F   DTD 02/11/1998

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340201

REVISION NR D   DTD 02/11/1998

PART PIECE NUMBER:

 

IAW REFERENCE QAP 19207 12301365

REVISION NR F   DTD 03/20/1998

PART PIECE NUMBER:

 

IAW REFERENCE QAP 19207 12340201

REVISION NR C   DTD 08/14/1987

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12342457

REVISION NR C   DTD 05/30/1991

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340206

REVISION NR B   DTD 03/18/1992

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340236

REVISION NR C   DTD 04/13/1993

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340244

REVISION NR E   DTD 01/26/2007

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12342721

REVISION NR A   DTD 05/14/1993

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12356687

REVISION NR C   DTD 10/29/1992

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12356764

REVISION NR     DTD 05/12/1987

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340222

REVISION NR A   DTD 02/21/1991

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 24617 C-3.223

REVISION NR     DTD 07/20/1963

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340204

REVISION NR     DTD 12/11/1986

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340227

REVISION NR     DTD 07/23/1986

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 24617 E-62.101

REVISION NR     DTD 06/01/1972

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 97403 13226E7538

REVISION NR C   DTD 08/15/1997

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340214

REVISION NR C   DTD 03/06/2000

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340518

REVISION NR B   DTD 05/16/2006

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340682

REVISION NR C   DTD 05/12/2000

PART PIECE NUMBER:

 

IAW REFERENCE QAP 19207 12356764

REVISION NR A   DTD 02/02/2012

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340864

REVISION NR A   DTD 02/17/1989

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12342456

REVISION NR A   DTD 05/12/1992

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340193

REVISION NR E   DTD 03/12/2007

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340200

REVISION NR C   DTD 03/08/2007

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340679

REVISION NR B   DTD 09/15/2006

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340686

REVISION NR A   DTD 05/05/2000

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR A   DTD 04/30/2003

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12463286

REVISION NR B   DTD 01/01/1999

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12469122

REVISION NR A   DTD 01/03/2007

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12469117

REVISION NR B   DTD 11/29/2006

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 24617 E-62.101

REVISION NR     DTD 06/01/1972

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12480694

REVISION NR     DTD 08/10/2006

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12469123

REVISION NR B   DTD 01/11/2013

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR B   DTD 11/18/2008

PART PIECE NUMBER:

 

IAW REFERENCE DRAWING NR 19207 12340245-7

REVISION NR     DTD 11/30/2011

PART PIECE NUMBER:

 

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD059

REFERENCE NUMBER:CS086

REFERENCE NUMBER:CQA01

REFERENCE NUMBER:CS001

REFERENCE NUMBER:CQ015

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS