DMG MORI DMU 125 monoBLOCK
Closed Pre-Solicitation Posted
- Solicitation number
- 26-25-1001
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- 8(a) Sole Source
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- Place of performance
- Kings Bay, Georgia, United States
- Points of contact
-
- Christopher Bara avnipemarketresearch@dla.mil
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation is conducting market research to identify vendors capable of supplying a DMG MORI DMU 125 monoBLOCK Multi-Axis Machining Center with comprehensive turnkey services. This pre-solicitation notice seeks to identify qualified parties with the resources and capabilities to support this requirement, which falls under the Machine Tool Manufacturing industry (NAICS 333517). Interested parties must demonstrate capability to provide the machining center along with ancillary services including tooling, training, technical documentation, IUID tagging, installation, and foundation support. Responses should not exceed ten single-sided pages and must be submitted by April 27, 2026, to avnipemarketresearch@dla.mil with the subject line "ATTN 26-25-1001." This is strictly a market research vehicle and does not constitute a solicitation, request for quote, or commitment by the government to award a contract based on responses received.
This opportunity is designated as an 8(a) Sole Source set-aside, meaning it is restricted to certified 8(a) program participants. No specific incumbent contractor or current contract holder is identified in this pre-solicitation notice. The notice does not disclose award values or budget ranges for this procurement. Respondents are required to identify their company's business size in terms of employee count and domestic or foreign status to support consideration of solicitation set-asides and small business classifications. As a source sought notice for information purposes only, no funds are available for proposal preparation, no feedback will be provided to respondents, and telephone inquiries will not be accepted or acknowledged.
Notice text
DLA-Aviation is issuing this source sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for a DMG MORI, DMU 125 monoBLOCK MMulti-Axis Machining Center.
THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNIAL DESCRIPTION IS STRICTLY VOLUNTARY.
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by closing date listed on this posting. All responses under this Sources Sought Notice must be emailed to avnipemarketresearch@dla.mil with Subject Line: ATTN 26-25-1001. Responses should not exceed ten (10) one-sided 8.5 x 10-inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to fulfil this requirement. Please include the notice ID number in your submission heading.
Interested parties that can provide the required DMG MORI, DMU 125 monoBLOCK MMulti-Axis Machining Center with turnkey services including tooling, training, technical data (manuals, drawings), IUID tag, installation, and foundation may identify their interest and capability to respond to this requirement no later than the stated closing date/time.
- Please identify your company’s business size in terms of number of employees, and whether domestic or foreign for consideration of solicitation set-aside, and small business subcontracting requirements.
- Please identify your company’s manufacturer status: Manufacturer/Non-Manufacturing Source. If non-manufacturing source, please identify the manufacturer.
- Please identify whether your company will partner with subcontractors to complete this requirement.
- Please provide a basis of estimate to consider the total financial budget of this requirement. Estimates should capture the total procurement requirements, not solely the machine’s requirements.
- For simplicity, the estimate should be broken out as follows and just needs a total cost for each area:
- Machine Cost to meet requirements (do not have to line items or provide options packages)
- Training
- Tech Data - Manuals and drawings
- Installation Cost
- Foundation Work
- Shipping
- For simplicity, the estimate should be broken out as follows and just needs a total cost for each area:
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| CCA, SBC, LDS, 4V, FC | Aviation | No set-aside | |
| SPE4A725R0823-1680-016930490- Miscellaneous Aircraft Accessories and Components | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity