Delta Channel Cross - Refurbish and Install Radial

Delta Channel Cross Radial Gate Upgrade
.

The Mid Pacific Region of the Bureau of Reclamation intends to issue a Solicitation for a firm fixed-price contract for the Delta Cross Channel Radial Gate Hoist Refurbishment and Installation at the Delta Cross Channel. This procurement is set-aside for Small Business and will be an Invitation for Bid (IFB) using FAR Part 14 procedures. The work to be performed is described below. The applicable North American Industry Classification System (NAICS) Code is 237990 and the related small business size standard is $36.5M. This notice is not a request for proposal and the information presented in this announcement will not obligate the Bureau of Reclamation in any manner. The estimated cost of this project is between $250,000.00 and $500,000.00. Work is located at approximately 0.2 miles northeast of Walnut Grove, California.
PRINCIPAL COMPONENTS OF WORK:
A. Transport Government furnished equipment from warehouse to work site approximately 50 miles away.
B. Inspection of Government furnished parts.
C. Disassemble and inspect hoist assemblies for two, 60 feet x 30 feet radial gates.
D. Provide inspection reports of findings for inspections.
E. Provide design drawings, calculations and data for the spur gears, design modifications to Government furnished parts and existing parts and equipment to achieve design
functionality, including: Machining keyways and set screw taps for Government
furnished 14-inch pinions.
F. Provide shop drawings of spur gears, drum shafts, intermediate shafts, and modifications to Government furnished parts and existing parts and equipment to achieve design functionality, including: Machining keyways, and set screw taps for Government
furnished 14-inch pinions.
G. Design, fabricate and install spur gears.
H. Fabricate and install drum shafts and intermediate shafts.
I. Machine keyways on Government furnished 14-inch pinions.
J. Machine set screw taps on Government furnished 14-inch pinions.
K. Repair gear cover base bolt holes and replace gear cover base bolts.
L. Furnish and install keys for the intermediate shafts and pinion shafts.
M. Furnish and install cap screws and dowels for Government furnished ring gears.
N. Furnish and install base bolts for Government furnished roller bearing pillow blocks.
O. Furnish and install set screws for Government furnished 14-inch pinions.
P. Furnish and install new limit switches and associated equipment.
Q. Furnish and install hook shaft roller bearing pillow block assemblies with pertinent
components and mounting hardware.
R. Design, furnish, and install physical bird deterrents.
S. Reassemble hoist assemblies for two, 60 feet x 30 feet radial gates using inspected and
suitable for service existing parts and new parts furnished by Government and the
Contractor.
T. Test hoist operations to insure proper operation once hoist refurbishment is completed.
U. Dispose replaced and removed components off site.
Solicitation 140R2019B0008 will be posted electronically via www.fedbizopps.gov on or about Tuesday, May 14, 2019. The date for receipt of proposals will be on or about Thursday, June 13, 2019. The solicitation must be downloaded at the above website; no paper copy of this solicitation will be distributed.
Prospective contractors MUST be actively registered in the System for Award Management (SAM) database at http://www.sam.gov to be eligible for award.
Any questions concerning this solicitation should be directed to Robert Downing via email Subject “140R2019B0008†at rdowning@usbr.gov
.