Consumable tools

THIS IS A SOURCES SOUGHT SYNOPSIS ONLY! Please DO NOT respond with quotes. The U.S. Government desires to procure expendable tools on a small business set-aside basis, provided 2 or more qualified small businesses respond to this sources sought synopsis with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price.
This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry. It is the responsibility of potential offerors to monitor the Governmentwide Point of Entry for additional information pertaining to this requirement The anticipated NAICS code(s) is 333991, Power‐Driven Hand tool Manufacturing.
This is a sources sought attempting to ascertain whether a SBA certified SMALL BUSINESS is capable of manufacturing and delivering to the U.S. Government the items described in the attached word document. Please provide a capability statement addressing your organization's ability to provide the requirement as specified in the attached salient characteristics.
Responses to this notice shall include company name, address, point of contact, size of business pursuant to North American Industrial Classification Code (NAICS) and must respond to the following questions:
1) Is your business a small business under NAICS code 333991?
2) Does your firm qualify as a small disadvantaged business?
3) If disadvantaged specify if your firm is certified under Section 8(a) of the Small Business Act?
4) Are you a certified HUBZone firm?
5) Are you a woman‐owned or operated business?
6) Are you a certified Service‐Disabled Veteran Owned or Veteran Owned business?
7) Is your business a large business?
8) Is your business registered in SAM.gov?
9) Is there another NAICS code that is better suited for this requirement?
In an attempt avoid any confusion, the SMALL BUSINESS being sought SHALL be the actual manufacturer of the items in the attached.
Please respond on 18 December 2017 by 5:00 PM, Central Standard Time.
Please respond via email to: karl.v.burkhamer.civ@mail.mil. Fort Leonard Wood, MO. MICC.Salient Characteristics

1. Reciprocating Saw Blades (Steel Blade 6")

1 Carbide tipped reciprocating blades used for extreme metal cutting (3/32" to 5/16" thick metal), cast iron and stainless steel

2 6" inch overall length, with 1 inch width body, 8 TPI, must be compatible with Hilti WSR 36-A Cordless Reciprocating Saw connections

3 These reciprocating saw blades must be compatible with the Hilti WSR 36-A Cordless Reciprocating Saw Part #3487010

 

2. Reciprocating Saw Blades (Steel Blade 9")

1 Carbide tipped reciprocating blades used for extreme metal cutting (3/16" to 1/2" thick metal), cast iron and stainless steel

2 9" inch overall length, with 1 inch width body, 8 TPI, must be compatible with Hilti WSR 36-A Cordless Reciprocating Saw connections

3 These reciprocating saw blades must be compatible with the Hilti WSR 36-A Cordless Reciprocating Saw Part #3487010

3. Reciprocating Saw Blades (Steel Blade 6")

1 Carbide Tip reciprocating blades used for nail embedded wood cutting

2 6" inch overall length, 6/9 TPI, must be compatible with Hilti WSR 36-A Cordless Reciprocating Saw connections

3 These reciprocating saw blades must be compatible with the Hilti WSR 36-A Cordless Reciprocating Saw Part #3487010

 

4. Reciprocating Saw Blades (Steel Blade 9")

1 Carbide Tip reciprocating blades used for nail embedded wood cutting

2 9" inch overall length, 6/9 TPI, must be compatible with Hilti WSR 36-A Cordless Reciprocating Saw connections

3 These reciprocating saw blades must be compatible with the Hilti WSR 36-A Cordless Reciprocating Saw Part #3487010

5. Circular Saw Blades

1 Carbide Tip Circular saw blades used for nail embedded wood cutting

2 7 1/4" inch overall circumference, 24 Teeth, 5/8" Arbor

3 These circular saw blades must be compatible with the Hilti WSC 7.25 A36 Cordless Circular Saw Part #327896

6. Circular Saw Blades

1 Carbide Tip Circular saw blades used for Steel, angle iron, flat bar, channel and other ferrous metals

2 7-1/4 inch overall circumference, 48 Teeth, 5/8 inch Arbor

3 These circular saw blades must be compatible with the Hilti WSC 7.25 A36 Cordless Circular Saw Part #327896

7. Rotary bit (8" long x 1" dia) "Y/SDSmax" fitting size

1 Hammer Drill Bit with full carbide x-geometry head for drilling concrete or other base material

2 13 inches long total length, 8 inches long working length, 1" in diameter, Connection must be compatible with a SDS Max or TE-Y Connector

3 These rotary bits must be compatible with the Hilti TE-80 ATC/AVR Part #2083438

 

8. Pointed chisel bit (11" long) "Y/SDSmax" fitting size

1 Pointed Chisel with polygon design used in breaking and demolition of concrete, brick or masonry

2 11 inches total length, Connection must be compatible with a SDS Max or TE-Y Connector

3 These pointed chisel bits must be compatible with the Hilti TE-80 ATC/AVR Part #2083438

9. Narrow flat chisel bit (11" long x 1" wide) "Y/SDSmax" fitting size

1 Narrow flat chisel with polygon design used in breaking, demolishing, chipping and finishing of concrete, brick and masonry

2 11 inches total length, 1 inch width, Connection must be compatible with a SDS Max or TE-Y Connector

3 These narrow flat chisel bit must be compatible with the Hilti TE-80 ATC/AVR Part #2083438

10. Wide flat chisel bit (11" long x 1 15/16" wide) "Y/SDSmax" fitting size

1 Wide-flat chisel with polygon design used in chipping and cutting and smoothing of concrete, brick and masonry

2 11 inches total length, 1 15/16 inch wide, Connection must be compatible with a SDS Max or TE-Y Connector

3 These wide flat chisel bits must be compatible with the Hilti TE-80 ATC/AVR Part #2083438

11. Rotary bit (9 1/2" long x 1/2" dia) "C/SDSplus" fitting size

1 Hammer Drill bit with 4 carbide cutting edges for drilling concrete

2 12 inch total length, 3/4 inch diameter, 9 ½ inch working length, Connection must be compatible with SDS Plus or TE-C connection

3 These rotary bits must be compatible with the Hilti Cordless rotary hammer TE 6-A36 Part #2098505

12. Rotary bit (9 1/2" long x 3/4" dia) "C/SDSplus" fitting size

1 Hammer Drill bit with 4 carbide cutting edges for drilling concrete

2 12 inch total length, ½ inch diameter, 9 ½ inch working length, Connection must be compatible with SDS Plus or TE-C connection

3 These rotary bits must be compatible with the Hilti Cordless rotary hammer TE 6-A36 Part #2098505

13. Pointed chisel bit (14 3/16" long) "S" fitting size

1 Pointed Chisel with polygon wave for heavy demolition of concrete or masonry

2 14 3/16 inches in total length, Connection must be compatible with TE-S Connection

3 These pointed chisel bits must be compatible with the Hilti TE-1000 AVR Part #3523418

14. Narrow flat chisel bit (14 3/16" long x 1 1/4" wide) "S" fitting size

1 Narrow Flat Chisel with polygon design for controlled breaking of concrete or masonry

2 14 3/16 inches in total length, 1 ¼ inch width at the tip, Connection must be compatible with TE-S Connection

3 These narrow flat chisel bits must be compatible with the Hilti TE-1000 AVR Part #3523418

 

15. Wide flat chisel bit (14 3/16" long x 1 15/16" wide) "Y/SDSmax" fitting size

1 Wide Flat chisel with polygon design for cutting asphalt, concrete or masonry

2 14 3/16 inches in total length, 1 15/16 inches wide at the tip, Connection must be compatible with TE-S Connection

3 These wide flat chisel bits must be compatible with the Hilti TE-1000 AVR Part #3523418

16. Gas Powered Concrete Saw Blades (14" dia)

4 Diamond cutting blade for gas saws for cutting concrete, masonry or other materials. Wet or Dry use

5 14 inch diamond saw blade, 23 segments, blade thickness .09 inches, 20 mm reducing ring arbor size

6 These concrete saw blades must be compatible with the Hilti Hand-held gas saw DSH 900 X 14" Part #2121541

17. Electric Diamond blade (12" dia, dry blade)

1 Diamond cutting blade for gas saws for cutting concrete, masonry or other materials. Dry Operation Only

2 12 inch diamond saw blade, 21 segment, 20 mm reducing ring arbor size

3 These diamond cutting blades must be compatible with the Hilti DCH300, 12" Electric Saw Part #3539197

18. Pointed chisel bit (11" long) "TE-C/SDS Plus" fitting size

1 Pointed Chisel with polygon design used in breaking and light demolition of concrete, brick or masonry

2 7 1/16 inches total length, Connection must be compatible with a SDC Plus or TE-C Connector

3 These pointed chisel bits must be compatible with the Hilti Cordless rotary hammer TE 6-A36 Part #2098505

 

19. Narrow flat chisel bit (7 1/16 inches long x 9/16 inches wide) "TE-C/SDS Plus" fitting size

1 Narrow flat chisel with polygon design used in breaking, demolishing, chipping and finishing of concrete, brick and masonry

2 7 1/16 inches total length, 9/16 inch width, Connection must be compatible with a SDS Plus or TE-c Connector

3 These narrow flat chisel bit must be compatible with the Hilti Cordless rotary hammer TE 6-A36 Part #2098505

20. 15" Diamond Chain for Concrete Saw

1 Diamond tipped chain saw chain used for cutting concrete, masonry, and brick

2 Chain fits a 15 inch blade

3 These diamond chainsaw blades must be compatible with the Stanley Hydraulic Chain Saw Part #DS113000

21. 15" Diamond Bar for Concrete Saw

1 Chain saw bar used for cutting concrete, masonry, and brick

2 15 inch bar with Sprocket nose

3 These chainsaw diamond bars must be compatible with the Stanley Hydraulic Chain Saw Part #DS113000

22. 14" Abrasive Wheel for Metal

1 Abrasive saw wheel for cutting metal

2 14" Abrasive wheel with 1" Arbor

3 These abrasive cutting wheels must be compatible with the Stanley Hydraulic Cutoff Saw Part #CO25141

23. 14" Abrasive Wheel for Masonry

1 Abrasive saw wheel for cutting concrete masonry or brick

2 14" Abrasive wheel with 1" Arbor

3 These abrasive cutting wheels must be compatible with the Stanley Hydraulic Cutoff Saw Part #CO25141

24. 14" Diamond Blade, Dry Cut 1" Arbor

1 Diamond saw blade for cutting concrete, masonry and brick

2 14" Diamond Saw blade with 1" Arbor

3 These diamond saw blades must be compatible with the Stanley Hydraulic Cutoff Saw Part #CO25141

25. 1-1/8" x 6" Moil Point

1 Moil point chisel to be used to help chip or break concrete, masonry or brick

2 14 inches in total length, 1 1/8th inch Shank size Hex x 6 Inches

3 These moil point chisels must be compatible with the Stanley Handheld Breaker BR45 Part #BR45120 and Handheld Breaker BR87 Part #BR87120

26. 3" Chisel Bit

1 Wide Chisel to be used to help chip or break concrete, masonry or brick

2 14 inches in total length, 1 1/8th inch Shank size Hex x 6 Inches 3 inches wide

3 These wide chisel bits must be compatible with the Stanley Handheld Breaker BR45 Part #BR45120 and Handheld Breaker BR87 Part #BR87120

27. 1" Chisel Bit

1 Narrow Chisel to be used to help chip or break concrete, masonry or brick

2 14 inches in total length, 1 1/8th inch Shank size Hex x 6 Inches, 1 inch wide at tip

3 These narrow chisel bits must be compatible with the Stanley Handheld Breaker BR45 Part #BR45120 and Handheld Breaker BR87 Part #BR87120

 

28. Concrete Bit 1" x 24"

1 Drill Bit to be used to drill into concrete, masonry or brick

2 Carbide Bit, 1 inch x 24 inches of total length uses 736 Skil Hex bits

3 These concrete bits must be compatible with the Stanley Hammer Drill HD 45 Part #HD45110B

29. Concrete Bit 1 ½" x 24"

1 Drill Bit to be used to drill into concrete, masonry or brick

2 Carbide Bit, 1 ½ inch x 24 inches of total length uses 736 Skil Hex bits

3 These concrete bits must be compatible with the Stanley Hammer Drill HD 45 Part #HD45110B

30. Concrete Bit 2" x 24"

1 Drill Bit to be used to drill into concrete, masonry or brick

2 Carbide Bit, 2 inch x 24 inches of total length uses 736 Skil Hex bits

3 These concrete bits must be compatible with the Stanley Hammer Drill HD 45 Part #HD45110B