CL20192187-LTC

Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to:

Bret.Griffin@dla.mil, Phone 614-692-1148. We thank you in advance for your assistance.

NSN - 2540-01-255-3347

-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:012553347

     PARTS KIT, HULL SEMI-ANNUAL

     REFERENCE NUMBER:RQ032
     REFERENCE NUMBER:RD002
     REFERENCE NUMBER:RP001

     REFERENCE NUMBER:RA001
     REFERENCE NUMBER:RQ001
     REFERENCE NUMBER:RQ002
     REFERENCE NUMBER:RQ009
     REFERENCE NUMBER:RQ011
     REFERENCE NUMBER:RQ016

     CONTRACTOR CERTIFICATE OF CONFORMANCE REQUIRED

     REFERENCE NUMBER:RS023

     REFERENCE NUMBER:CS147

     REFERENCE NUMBER:CS187

     REFERENCE NUMBER:ZD080

     QUALITY ASSURANCE PROVISIONS (QAPS):
     PROVIDED I/A/W THE FOLLOWING DRAWINGS<(>,<)>
     12273559,12284708,12286856,12387379 AND 12287953.

     EXCEPTION TO DRAWING 12345800 NOTE 2: MIL-R-2765 BE USED IN LIEU OF
     MIL-R-3065.

     PROVIDE 1 EACH OF THE FOLLOWING PART NUMBER 12345800-2, 12345800-3, AND
     12345800-4.

     EXCEPTION TO DRAWING 12961043: GLOVES ALLEGIANCE HEALTHCARE CORP. CAGE
     07TA6 PART NUMBER 2D7088 OR MAXIM MEDICAL INC. CAGE 06US7 PART NUMBER
     480215 MAYBE USED IN LIEU OF CAGE 89875 PART NUMBER E-011.

     EXCEPTION TO DRAWING 11610298: CAGE 87405 PART NUMBER CF-308-2PL IS
     APPROVED BY ESA.

     EXCEPTION TO DRAWING 12285860 PER CAGE 22627 VENDOR PART NUMBER CHANGED
     TO 02-03120BG01.

     EXCEPTION TO DRAWING 5705438: NSN FOR LITHIUM BATTERY ON PAGE 4 SHOULD
     READ 6135-01-481-7127 IN LIEU OF 6135-01-441-5746.

     USE MIL-STD-129P W/CHG 2

     CRITICAL APPLICATION ITEM

     IAW BASIC DRAWING NR 19207 5705438
     REVISION NR AG  DTD 08/15/2011
     PART PIECE NUMBER: 5705438

     IAW REFERENCE QAP 19207 12273559
     REVISION NR     DTD 03/22/1993
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12287953
     REVISION NR F   DTD 06/30/1993
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12288306
     REVISION NR R   DTD 04/12/1996
     PART PIECE NUMBER: REFERENCE

     IAW REFERENCE DRAWING NR 19207 12387272
     REVISION NR B   DTD 08/09/2016
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11602062
     REVISION NR H   DTD 08/01/2015
     PART PIECE NUMBER: REFERENCE

     IAW REFERENCE QAP 19207 12284708
     REVISION NR D   DTD 11/16/2011
     PART PIECE NUMBER:

     IAW REFERENCE QAP 19207 12286856
     REVISION NR D   DTD 05/10/2013
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12336831
     REVISION NR H   DTD 11/12/1996
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12336814
     REVISION NR K   DTD 03/02/2007
     PART PIECE NUMBER: 12336814-8, -10 & -11

     IAW REFERENCE DRAWING NR 19207 12273563
     REVISION NR U   DTD 12/10/2008
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12345034
     REVISION NR A   DTD 09/21/1987
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19206 12312058
     REVISION NR A   DTD 04/27/1987
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 5911304
     REVISION NR D   DTD 06/28/2005
     PART PIECE NUMBER: 5911304-134

     IAW REFERENCE DRAWING NR 19207 11610298
     REVISION NR F   DTD 03/29/1993
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12273464
     REVISION NR C   DTD 01/11/1991
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12272827
     REVISION NR L   DTD 06/06/1995
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 9377334
     REVISION NR A   DTD 09/17/1991
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12286856
     REVISION NR K   DTD 01/01/1939
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12284544
     REVISION NR A   DTD 08/07/1992
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19206 7309998
     REVISION NR G   DTD 07/23/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12288067
     REVISION NR C   DTD 09/12/1989
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12387269
     REVISION NR D   DTD 08/09/2016
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12387299
     REVISION NR     DTD 02/26/1992
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12387349
     REVISION NR C   DTD 06/13/2017
     PART PIECE NUMBER: 12387349-35

     IAW REFERENCE DRAWING NR 19207 12472719
     REVISION NR     DTD 09/28/2000
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12987693
     REVISION NR B   DTD 03/06/2017
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12273559
     REVISION NR I   DTD 10/01/1999
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11602061
     REVISION NR J   DTD 06/01/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12324584
     REVISION NR A   DTD 11/11/1990
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11641857
     REVISION NR F   DTD 08/01/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12387152
     REVISION NR E   DTD 06/11/2019
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19206 12528494
     REVISION NR A   DTD 06/05/2009
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12283641
     REVISION NR C   DTD 09/25/2006
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12288303
     REVISION NR G   DTD 07/16/1996
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19206 12529740
     REVISION NR C   DTD 09/03/1987
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12272684
     REVISION NR G   DTD 08/27/1998
     PART PIECE NUMBER:

     IAW REFERENCE QAP 19207 12387379
     REVISION NR B   DTD 05/28/2003
     PART PIECE NUMBER:

     IAW REFERENCE QAP 19207 12287953
     REVISION NR     DTD 04/16/1993
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705143
     REVISION NR G   DTD 11/17/1999
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11602063
     REVISION NR N   DTD 08/01/2015
     PART PIECE NUMBER: REFERENCE

     IAW REFERENCE DRAWING NR 19200 9377106
     REVISION NR D   DTD 12/17/2010
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12284708
     REVISION NR F   DTD 05/23/2003
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12301979
     REVISION NR B   DTD 03/13/1990
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12344039
     REVISION NR E   DTD 06/24/2005
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12345800
     REVISION NR B   DTD 04/22/2003
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12387379
     REVISION NR C   DTD 09/03/2002
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12961043
     REVISION NR C   DTD 12/14/2017
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 81205 NAS1149
     REVISION NR K   DTD 02/01/2008
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705134
     REVISION NR B   DTD 05/11/1987
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705155
     REVISION NR B   DTD 03/16/1988
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705207
     REVISION NR C   DTD 05/17/2002
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11610232
     REVISION NR B   DTD 08/01/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 11641744
     REVISION NR C   DTD 08/01/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12282157
     REVISION NR K   DTD 03/06/2017
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 80205 NAS1149
     REVISION NR 2   DTD 08/29/1994
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12285860
     REVISION NR L   DTD 08/08/2017
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705135
     REVISION NR E   DTD 05/11/1987
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12373562
     REVISION NR U   DTD 09/02/2015
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705438
     REVISION NR     DTD 08/31/2016
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 5705438
     REVISION NR S   DTD 03/12/2012
     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12285860
     REVISION NR K   DTD 07/18/2016
     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
     QUP:001  PRES MTHD:ZZ  CLNG/DRY:Z  PRESV MAT:ZZ
     WRAP MAT:ZZ  CUSH/DUNN MAT:ZZ  CUSH/DUNN THKNESS:Z
     UNIT CONT:ZZ  OPI:A
     INTRMDTE CONT:ZZ  INTRMDTE CONT QTY:ZZZ
     PACK CODE:U
     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

     PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL
     PACKAGING INSTRUCTION AK12553347.

************************************************************************************************************

                                                    GLOSSARY

************************************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RQ032

     RQ032: EXPORT CONTROL OF TECHNICAL DATA

     This item has technical data some or all of which is subject to
     export-control of either the International Traffic in Arms regulations
     (ITAR) or the Export Administration Regulations (EAR), and cannot be
     exported without prior authorization from either the Department of State
     or the Department of Commerce. Export includes disclosure of technical
     data to foreign persons and nationals whether located in the United
     States or abroad. This requirement applies equally to foreign national
     employees and U.S. companies and their foreign subsidiaries. DFARS
     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control
     technical data to DLA contractors that have an approved US/Canada Joint
     Certification Program (JCP) certification, have completed the
     Introduction to Proper Handling of DOD Export-Controlled Technical Data
     Training and the DLA Export-Controlled Technical Data Questionnaire
     (both are available at the web address given below), and have been
     approved by the DLA controlling authority to access the
     export-controlled data. Instructions for obtaining access to the
     export-controlled data can be found at:
     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed
     for use are required to have an approved JCP certification and have
     been approved by the DLA controlling authority to access
     export-controlled data managed by DLA. DLA will not delay award in
     order for an offeror or its supplier to apply for and receive approval
     by the DLA controlling authority to access the export-controlled data.

     REFERENCE NUMBER RD002

     RD002, COVERED DEFENSE INFORMATION APPLIES

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ001

     RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
     NON-MANUFACTURERS)

     REFERENCE NUMBER RQ002

     RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

     REFERENCE NUMBER RQ009

     RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER RQ016

     RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
     LISTS (QML).  THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
     SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
     QUALIFIED MANUFACTURERS LIST (QML).  QUALIFICATION REQUIREMENTS IN
     PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
     MANUFACTURERS LIST (QML)" APPLY.

     REFERENCE NUMBER RS023

     RS023: Shelf-life requirement RS001 for a TYPE I (CODE S)  item with a
     shelf life of 60 months (non-extendable) applies to this item.

     REFERENCE NUMBER CS147

     "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
     MUST CONFORM TO SOURCE CONTROL DRAWING. BY
     SUBMITTING AN OFFER, THE OFFEROR AGREES TO
     PROVIDE SOURCE CONTROLLED COMPONENTS FROM
     SOURCES APPROVED ON THE APPLICABLE SOURCE
     CONTROL DRAWING."

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
     USED NOR INCORPORATED IN ANY ITEMS TO BE
     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
     SPECIFICATION REQUIREMENTS.

     REFERENCE NUMBER ZD080

     SAMPLING:
     THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
     H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
     SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
     STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
     AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
     VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
     ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
     SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
     MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
     PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
     SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
     UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to:

Bret.Griffin@dla.mil, Phone 614-692-1148. We thank you in advance for your assistance.

NSN - 2540-01-255-3347