Circuit Card Assembly

NSN:009237266
-
** PID Text
-
 CIRCUIT CARD ASSEMBLY

REFERENCE CONTROL NUMBE 1537578     CAGE 83298

CAGE D3683 not licensed to sell in the U.S.

ELECTRO STATIC SENSITIVE DEVICE

FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S-
13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
AND RELIABILITY TO THAT WHICH WAS AVAILABLE
PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
NOVEMBER 30, 1998.

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE
DATA PACKAGE INCLUDING DATA FOR THE APPROVED
AND ALTERNATE PART FOR EVALUATION.

DRAWING INDICATES ITEM IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<
---------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD
SERVICE KIT.  FOR FURTHER INFORMATION, CONSULT
MIL-HDBK-773.

PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-E-17555, FOR ELECTRONIC EQUIPMENT.
.                                              .
WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL
"A" PRESERVATION AS CITED IN THE COMMODITY
SPECIFICATION.

DRAWING INDICATES ITEM IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<
---------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD
SERVICE KIT.  FOR FURTHER INFORMATION, CONSULT
MIL-HDBK-773.
This item requires DOD QUALIFIED Electro-
static Discharge (ESD) protective packaging
materials in accordance with MIL-PRF-81705.
The supplier shall be responsible for verifying
that all MIL-PRF-81705 barrier materials
(or converted bags) were supplied from a
qualified manufacturer currently listed on
QPL-81705. For additional ESD packaging
information, refer to the following DLA
packaging website: http://www.landandmaritime.
dla.mil/Offices/Packaging/default.asp

HONEYWELL ASCA INC DBA HONEYWELL 07217 P/N 1537578
ALEKTRONICS, INC. DBA 0DR48 P/N TD0343

     REFERENCE NUMBER:E0186
     REFERENCE NUMBER:E0116
     REFERENCE NUMBER:J0139
     REFERENCE NUMBER:J3333
     REFERENCE NUMBER:J0139
     REFERENCE NUMBER:ZDESD
     PREP FOR DELIVERY
     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS
-
** Packaging Text
-
SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:

• 
  
• ,,All Section "D" Packaging and Marking Clauses take precedence over
  
  ASTM D3951.
  
  

  ,,In addition to requirements in MIL-STD-129, when Commercial Packaging

  
  is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
  
  

  ,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified

  
  in the contract take precedence over QUP in ASTM D3951.
  

   

  
  

  PACKAGING TEXT
  -
  THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
  Markings Paragraph
  When ASTM D3951, Commercial Packaging is specified, the following apply:

  
  

  ,,All Section "D" Packaging and Marking Clauses take precedence over

  
  ASTM D3951.
  
  

  ,,In addition to requirements in MIL-STD-129, when Commercial Packaging

  
  is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
  
  

  ,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified

  
  in the contract take precedence over QUP in ASTM D3951.
  -
  ITEM DESCRIPTION TEXT
  -
  -
  REFERENCE NUMBER E0186
  -
  FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
  BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
  OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
  MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
  PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
  REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
  BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
  BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
  EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S-
  13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
  THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
  THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
  DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
  AND RELIABILITY TO THAT WHICH WAS AVAILABLE
  PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
  NOVEMBER 30, 1998.
  -
  -
  REFERENCE NUMBER E0116
  -
  ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
  OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
  AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE
  DATA PACKAGE INCLUDING DATA FOR THE APPROVED
  AND ALTERNATE PART FOR EVALUATION.
  -
  -
  REFERENCE NUMBER J0139
  -
  DRAWING INDICATES ITEM IS CLASSIFIED AS AN
  ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
  >>PRECAUTIONARY PACKAGING, HANDLING, AND
  PROCESSING PROCEDURES SHALL BE USED TO PREVENT
  DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
  OTHER ENVIRONMENTAL FIELD FORCES.<<
  ---------------------------------------------
  ALL ITEMS AND PACKAGES SHALL BE HANDLED AND
  OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD
  SERVICE KIT. FOR FURTHER INFORMATION, CONSULT
  MIL-HDBK-773.
  -
  -
  REFERENCE NUMBER J3333
  -
  PRESERVATION AND PACKAGING SHALL BE IAW THE
  LATEST REVISION OF MILITARY SPECIFICATION:
  MIL-E-17555, FOR ELECTRONIC EQUIPMENT.
  . .
  WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL
  "A" PRESERVATION AS CITED IN THE COMMODITY
  SPECIFICATION.
  -
  -
  REFERENCE NUMBER ZDESD
  -
  This item requires DOD QUALIFIED Electro-
  static Discharge (ESD) protective packaging
  materials in accordance with MIL-PRF-81705.
  The supplier shall be responsible for verifying
  that all MIL-PRF-81705 barrier materials
  (or converted bags) were supplied from a
  qualified manufacturer currently listed on
  QPL-81705. For additional ESD packaging
  information, refer to the following DLA
  packaging website: http://www.landandmaritime.
  dla.mil/Offices/Packaging/default.asp