CGC sea dragon drydock

Added: Jul 14, 2010 5:22 pm

7/14/2010 SOLICITATION ISSUE FOR CGC SEA DRAGON

PLEASE SEE THE FOLLOWING ATTACHED FILES:

1) SOLICITATION
2) SPECIFICATION
3) SCHEDULE OF SUPPLIES/SERVICES

Added: Jun 25, 2010 1:13 pm The United States Coast Guard, Surface Forces Logistics Center - Detachment Norfolk VA, intends to issue a Commercial Request for Quote (RFQ) for Dry Dock and repairs to the USCGC SEA DRAGON (WPB-87367) 87-FOOT PATROL BOAT. The vessel is homeported in Kings Bay, GA. The NAICS Code is 336611.

There is a Geographical restriction of 576 Nautical Miles from the cutter's homeport of Kings Bay, Georgia.

The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Small Business Set-Aside. Request for Quotes (RFQ) will be issued on or about July 1, 2010.

The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.

All work will be performed at the contractor's facility. The performance period is schedule for Forty-Two (42) calendar days and is expected to begin on or about November 1, 2010.

The scope of the acquisition will include, but is not limited to:

1. Perform Ultrasonic Thickness Measurements
2. Perform Ultrasonic Thickness Measurements
3. Perform Hull and Structural Plating Repairs in Various Compartments - Eroded Welds (Steel)
4. Clean and Inspect Dirty Oil Tank
5. Clean and Inspect Oily Water Tank
6. Clean and Inspect Fuel Service Tanks
7. Clean and Inspect Grey Water Tank
8. Clean and Inspect Sewage Tank
9. Clean Grey Water Piping System
10. Clean Sewage Piping System
11. Inspect Pilothouse Deck
12. Inspect RHIB Notch Skid Pads
13. Renew RHIB Notch Skid Pad Studs
14. Realign Main Engine/Reduction Gear
15. Remove, Inspect, and Reinstall Propeller Shafts
16. Repair Shaft
17. Straighten Shaft
18. Renew Intermediate Water-Lubricated Shaft Bearing
19. Renew Aft Water-Lubricated Shaft Bearing
20. Renew Intermediate Bearing Carrier
21. Renew Aft Bearing Carrier
22. Remove, Inspect, and Reinstall Propellers
23. Perform Minor Repair and Recondition of Propeller
24. Renew Depth Indicating Transducer
25. Renew Sea Valves and Inspect Associated Piping and Strainers
26. Remove, Inspect, and Reinstall Rudder Assemblies
27. Remove, Inspect and Reinstall Stern Launch Door, and Inspect Door Pivot Pins, Bushings, and Washers
28. Preserve Underwater Body - "Partial"
29. Preserve Underwater Body - "100%"
30. Preserve Stern Tubes
31. Modify and Renew Cathodic Protection System
32. Renew Transducer Fairing
33. Routine Drydocking
34. Provide Temporary Logistics
35. Renew Various Main Deck Steel Appendages
36. Modify and Preserve the Forepeak
37. Install Dirty Oil Tank Level Indicator
38. Preserve Mast
39. Preserve Superstructure - 100%
40. Preserve Freeboard - 100%

VESSEL DRAWINGS: To received a CD-ROM containing all applicable drawings, please submit your request to Nancy.M.Brinkman@uscg.mil The CD-ROM contains WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

Any questions regarding the solicitation should be sent via email to: Nancy.M.Brinkman@uscg.mil

Quotes are due on or about August 23, 2010, at 2:00 pm Eastern Standard Time and may be sent one of the following ways:

Email: nancy.m.brinkman@uscg.mil

Fax: (757) 628-4628

Mail: US Coast Guard
SFLC/PBPL/CP1
Attn: Nancy Brinkman
300 East Main Street, Suite 600
Norfolk, VA 23510-9102