BRAND NAME OR EQUAL Carver Pump
Closed Solicitation Posted
- Solicitation number
- N0017419R0002
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333996 Fluid Power Pump and Motor Manufacturing
- PSC
- Not on record
- Place of performance
- Indian Head, Maryland 20640, United States
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
The purpose of this modification is to incorporate the below Statement of Work, change the quantity from 1 each to 2 each and extend the close date to 01/07/2019.
STATEMENT OF WORK FOR RECIRCULATION PUMP
This Statement of Work (SOW) establishes and defines the requirements for manufacturing and delivering two identical recirculation pumps with motors for the 5" Dowel Rod facility at NSWC Indian Head. Prices shall include shipping costs.
1.1 SCOPE
The recirculation pumps must be a Carver Pump (order code GVS-BDG-XCZ-KZZ) or equivalent with salient characteristics as defined in Section 2.0.
Other deliverables include electronic copies of pump and motor assembly drawings. These drawings are required for NSWC IHEODTD Safety Office approval. A vendor shall not be selected until pumps and motor combinations are approved for use by NSWC IHEODTD Safety Office.
2.0 REQUIREMENTS
The pumps are to be a Carver Pump (order code GVS-BDG-XCZ-KZZ) or equivalent with additional requirements throughout this section. Based on the current pump, it shall be an equivalent of Carver Pump Serial Number 157490. The GV Series TechBook will be provided with this SOW for reference. The salient characteristics are as follows:
- Two Carver GVS 3 x 2.5 x 7 pumps, or equivalent
- All 316SS
- 36" column
- Carbon Graphite externally flushed line shaft bearings with no external lubrication
- No suction strainer or inlet tailpipe
- Two Siemens Motor Model 1MJP2152YK62, or equivalent (see Section 3.0 for pump details)
- Motor mounting plate in accordance with Section 2.1
2.1 MOTOR MOUNTING PLATE
Using The GV Series Techbook, Dwg: SP-GV-5, Rev: 0 as a guide, motor mount shall be sized according to the chart below and the rendering photo with no thru holes on the corners.
See Figure 1see provided drawing3 x 2 1/2 x 714 3/414 5/82 1/245.9 + column depth10.63N/APump DimensionsPump SizeDischarge SizeABCDEFG
Chart 1:
Figure 1:
A drawing of the motor mount shall be provided prior to vendor selection. A vendor shall not be selected until motor mount drawing is approved by Daniel Martin, M12 and Robert (Gregg) Frederick, M12.
3.0 ADDITIONAL INFORMATION
A pump tag for the current pump could not be found. The Final Assembly Tag provided for the current pump and motor at the time of purchase can be found below.
Figure 2:
Figure 3:
Figure 4:
4.0 DELIVERABLES
Documentation deliverables shall be delivered to the Technical Point of Contact for arrangement or review and approval/acceptance:
Technical Point of Contact 1:
Naval Surface Warfare Center, IHEODTD
Attn: Daniel Martin, Code M12DM
4895 McMahon Rd., Suite 107, Rm. 111
Indian Head, MD 20640-5126
Email: daniel.b.martin@navy.mil
ph: 301-744-5381
Technical Point of Contact 2:
Naval Surface Warfare Center, IHEODTD
Attn: Robert (Gregg) Frederick, Code M12
4895 McMahon Rd., Suite 107, Rm. 111
Indian Head, MD 20640-5126
Email: robert.g.frederick@navy.mil
ph: 301-744-1148
Material deliverables as specified below shall be delivered to the Production Point of Contact, for arrangement of inspection and acceptance:
Production Point of Contact:
Naval Surface Warfare Center, IHEODTD
Attn: Zelda Brown, Code MP1ZB
Email: zelda.brown@navy.mil
Ph: 301-744-1863
Delivery Address:
Naval Surface Warfare Center, IHEODTD
Receiving
Attn: Zelda Brown, Code MP1ZB
Receiving Officer, Bldg 116
4522 McMahan Road, Suite 100
Indian Head, MD 20640-5125 Deliverables
Deliverable
Quantity
Due
Pump and Motor Assembly
2
Based on specific manufacturer lead-time
Electronic Copies of Motor and Pump Assembly
2
Prior to Vendor selection
Electronic Drawings of Motor Mounting Plate
2
Prior to Vendor selection
Current Motor Identification Tag 2. Current Motor Identification Tag 1. Final Assembly Tag for Carver Pump SN 157490.Required motor mount geometry rendering. Note that there shall be no thru holes. Motor mounting plate dimensions (in inches).
1.0 INTRODUCTION
.
Update #1 ·
N00174-19-R-0002
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number for this procurement is N00174-19-R-0002 and this is a Request For Quotation (RFQ). A statement that the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-66. This announcement will be issued as a combined synopsis/solicitation. This requirement is 100% set aside Small Business. The anticipated award will be a Firm Fixed Price Contract, the award will be made based on the lowest price. The North American Industry Classification System (NAICS) code is 333996. The SB size standard for this code is 1250 employees.
CLIN0001 - 1 ea: CARVER PUMP GVS-BDG-XCZ-KZZ or EQUIVALENT
SALIENT CHARACTERISTICS
Pump must meet the following salient characteristics:
-Comprised of 316 Stainless Steel
‐ 36" column
‐ Bronze externally flushed line shaft bearing
‐ No strainer or tailpipe
‐ Large steel base w/ 316SS discharge pipe
‐ Pump‐only ‐ no coupling, guard, or motor
CLIN0002 - 1 lot: Shipping
All items shall be delivered FOB Destination to Indian Head, MD 20640-5070. Provision at FAR 52.212-1, Instruction to Offerors Commercial Items applies to this acquisition. The following addenda is provided to this provision: Request for Quotation should be submitted and shall contain the following information: Solicitation Number; Time Specified for receipt of offers; Name; Address; Telephone Number of Offeror; Terms of the expressed warranty; Price, Payment terms, Any discount terms, F.O.B. destination, CAGE code, DUNS number, Tax ID number and acknowledgement of all solicitation amendments. Quotes must indicate quantity, unit price and total amount. Offerors that fail to furnish the required information, or reject the terms and conditions of the solicitation may be excluded from consideration. FAR 52.212-3 Alt 1 Offerors Representations and Certifications-Commercial Items; FAR 52.212-4 Contract terms and conditions-Commercial Items; FAR 52.252-1 Solicitation Provisions incorporated by reference; DFARS 252.204-7004 Central Contractor Registrations(52.204-7) Alternate A; FAR 52.222-50 Combating Trafficking in Persons; FAR 52.212-5 Contract terms and Conditions required to implement statutes or executive orders-Commercial Items; FAR 52.211-6, Brand Name or Equal applies to this acquisition. FAR 52.219-6 Notice of Total Small Business Set-Aside; FAR 52.219-28 - Post-Award Small Business Program Representation; FAR 52.222-3 -- Convict Labor; FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies, FAR 52.222-21, Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity; FAR 52.222-36, Affirmative Action for Workers with Disabilities; FAR 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving; FAR 52.222-50 Combating Trafficking in Persons; FAR 52.225-13, Restrictions on Certain Foreign Purchases, FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. FAR 52.252-2 Clauses incorporated by reference; DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials; DFARS 252.211-7003 Item Identification and Valuation; DFARS 252.212-7001 Contract terms and conditions required to implement statutes or executive orders applicable to Defense Acquisitions of commercial items, DFARS 252.225-7001 Buy American Act and Balance of Payments Program, DFARS 252.232-7003 Electronic Submission of Payment Requests.
Points of contact:
Contract Specialist/Administrator:
Jodi Fields, Telephone: (301) 744-6544,
E-Mail: jodi.fields@navy.mil
IMPORTANT NOTICES:
1) RFQ submission must be in accordance with solicitation;
2) Offerors must be registered in the System for Award Management (SAM) to be eligible for award (Ref. DFARS 252.204-7004, Required Central contractor Registration);
3) All Amendments, if applicable, must be acknowledged;
4) Questions concerning this notice should be submitted to the Points of contact as indicated in this announcement.
5) Email offers will be accepted.
Response Time- Request for Quotation will be accepted until and no later than 0400 (04:00 p.m.) Easter Standard Time on 12 October 2018. All quotes must be marked with RFQ number and title.
.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity