Blade, compressor, AI

1) Estimated issue date and estimated closing/response date issued: 26 February 2013 and 28 March 2013.

2) SOL # FA8121-13-R-0021 PR # FD2030-13-00252

3) Repair/Remanufacture - Firm Fixed Price, Requirements Type Contract with One (1) Basic Year and Two (2) One Year Options

4) RMC/RMSC - 3/V

5) Items - 1st and 2nd Stage Single Compressor Blades (Applicable to F-15, F-16)

6) Line Item NSNs (P/Ns):

Item 0001 - 2840-01-364-7141 NZ (4076781)

Item 0002 - 2840-01-364-7142 NZ (4076782)

7) Descriptions:

Item 0001 - 1st Stage Single Compressor Blades

Item 0002 - 2nd Stage Single Compressor Blades

Item 0003 - DATA IAW 1423

Item 0004 - Over & Above

8) Total Line Item Quantities:

Item 0001 - BEQ Basic Year: 2180 Each BEQ Option Year I: 1682 Each BEQ Option Year II: 1828 Each Item 0002 - BEQ Basic Year: 2308 Each BEQ Option Year I: 2248 Each BEQ Option Year II: 2462 Each Item 0003 - 1 Lot - DATA IAW 1423

Item 0004 - 1 Lot - Over & Above

9) Application - F100-PW-229 Aircraft Engine (Applicable to F-15, F-16)

10) Destination:

Items 0001 and 0002 - SW3211, 3301 F AVE CEN REC BLDG 506 DR 22, Tinker AFB, OK 73145-8000

Item 0003 - TBD

Item 0004 - TBD

11) Required Delivery:

Item 0001 - 45 Calendar Days After Receipt Of (ARO) Reparables. Delivery will be 6 each per month starting 45 days after receipt of assets and will continue at a rate of 6 each per month until delivery is complete.

Item 0002 - 45 Calendar Days After Receipt Of (ARO) Reparables. Delivery will be 50 each per month starting 45 days after receipt of assets and will continue at a rate of 50 each per month until delivery is complete.

Item 0003 - TBD

Item 0004 - TBD

12) Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards.

13) Export Control Requirements: Yes. Item is export controlled. The solicitation/procurement data list is approved for release only to U.S. DoD contractors who are registered and certified with the Defense Logistics Information Service (DLIS). Submission of DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation is required as specified in the International Traffic in Arms Regulation (ITAR), 22 CFR Sections 121 through 128. Foreign contractors cannot participate as prime contractors. The technical data will not be available until the solicitation is posted.

14) If unit price exceeds $5,000, then UID requirements will apply.

15) Additional Information - Authority: 10 U.S.C. 2304 (C) (1), Justification: Supplies (or service) required are available from one or only a limited number of source(s) and no other type of supplies or services will satisfy agency requirements. All responsible sources solicited may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The current approved source is PAS Technologies (Cage Code: 4GMJ6).

Based upon market research, the Government is not using the policies contained in Part12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

NOTE: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

16) Buyer name, phone #, and email address:

Kenyatta Harper (405) 734-8487 kenyatta.harper@tinker.af.mil

17) Other Information - Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.fedbizopps.gov.