A7 M109 Paladin Parts
Closed Pre-Solicitation Posted
- Solicitation number
- W519TC25R9977
- Agency
-
ACC Rock Island
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 33699 Other Transportation Equipment Manufacturing
- PSC
- 1025 Guns, Over 150Mm Through 200Mm
- Place of performance
- Illinois 61299, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Rock Island Arsenal Joint Manufacturing Technology Center is seeking qualified vendors to produce parts for the A7 M109 Paladin, a specific military vehicle component. The Department of the Army Materiel Command Contracting Command Rock Island Arsenal is conducting a sources sought notice to identify potential manufacturers capable of producing these specialized parts. Vendors must be active in the Joint Certification Program (JCP) and are required to request access to technical drawings by submitting their CAGE code via email to john.e.jacobsen16.civ@army.mil. Prospective contractors must specify their approximate lead time for part production and confirm that all manufacturing will occur within the United States. The pre-solicitation notice was posted on February 6, 2025, with responses due by February 20, 2025, and is classified under the NAICS category of Other Transportation Equipment Manufacturing.
The procurement is not set aside for any specific business type, indicating it is open to a broad range of potential contractors. The maximum quantity of parts expected is 20 units, falling under Product Service Code 1025 for Guns Over 150Mm Through 200Mm. While no specific award value is mentioned, the limited quantity suggests this may be an initial production or prototype run. The notice explicitly states that this sources sought request should not be interpreted as a formal offer and that the US Government will not compensate vendors for submitting information. Potential vendors should carefully review the technical drawings and be prepared to demonstrate their manufacturing capabilities specific to military vehicle parts. The opportunity is specifically within the defense procurement sector, targeting manufacturers with expertise in transportation equipment and military hardware production.
Notice text
2 versions
Update #2 · Latest ·
At the request of RIA-JMTC, this Sources Sought is being cancelled.
Rock Island Arsenal Joint Manufacturing Technology Center is seeking qualified vendors who in their normal line of work are capable of producing the parts on the attached drawings. Max quantity is expected to not exceed 20 each. Vendor MUST be active in the Joint Certification Program (JCP), and must request access to the drawings via the controlled attachment. In reason for request, please put your CAGE code. Identify approx lead-time for production of the parts. Please send responses to john.e.jacobsen16.civ@army.mil. Parts MUST be made in the US. This is a sources sought, and not to be construed as any type of offer, nor will the US Government pay for vendors to submit information via this sources sought.
Update #1 ·
Rock Island Arsenal Joint Manufacturing Technology Center is seeking qualified vendors who in their normal line of work are capable of producing the parts on the attached drawings. Max quantity is expected to not exceed 20 each. Vendor MUST be active in the Joint Certification Program (JCP), and must request access to the drawings via the controlled attachment. In reason for request, please put your CAGE code. Identify approx lead-time for production of the parts. Please send responses to john.e.jacobsen16.civ@army.mil. Parts MUST be made in the US. This is a sources sought, and not to be construed as any type of offer, nor will the US Government pay for vendors to submit information via this sources sought.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20 | ACC Warren | No set-aside | |
| Manufacture of M284A2 155mm and other MTC Cannon Tubes | ACC Picatinny | No set-aside | |
| DRS M7A1 hdpe platform | ACC Rock Island | Total Small Business | |
| Gear Rack, per Drawing # 8767202, Revision Y, for 155MM M284 Cannon, for the Watervliet Arsenal | ACC Warren | Total Small Business | |
| Cannon Containers for the Watervliet Arsenal | ACC Warren | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity