4 Axis Machining Center
Closed Pre-Solicitation Posted
This opportunity was awarded. See its 2 award notices in the notice history.
- Solicitation number
- SPE4A8-22-Q-0003
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3417 Milling Machines
- Place of performance
- Oklahoma City, Oklahoma, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This notice seeks sources for the procurement of four A71NX Makino Horizontal Machining Centers and three A81 NX Makino Horizontal Machining Centers to be provided with associated tooling, technical data, and training. The Defense Logistics Agency Aviation intends to conduct market research and may award a sole source contract. Interested parties must have the capability to provide the required machining centers manufactured by Makino along with a rotary table, tooling, post processor, pallet system, identification tags, shipping, installation, and training. Responses to this pre-solicitation notice are due by September 23, 2021.
There is no set-aside designated for this procurement. The applicable NAICS code is 333517 for machine shops and the place of performance is Tinker Air Force Base in Oklahoma. While budget details were not provided, the agency seeks to procure four A71NX and three A81 NX machining centers along with associated equipment and services through this potential sole source award.
Notice text
The DLA-Aviation is issuing this source sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for Four (4) A71NX Makino Horizontal Machining Centers (HMC) and Three (3) A81 NX Makino Horizontal Machining Centers (HMC). The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 333517.
THIS SOURCES SOUGHT IS FOR INFORMATION PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE/PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.
Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.
Submission Instructions: Interested parties should submit a response to this Sources Sought Notice by September 23, 2021, NLT 02:00 pm EST. All responses under this Sources Sought Notice must be emailed to Travis.Cattenhead@dla.mil.Responses should be not exceed ten (10) one-sided 8.5 x 10 inch pages with a font that is no smaller than 10 point as this is not a request for a proposal but only a request for submission of a vendor's capability to perform this requirement.
DLA Aviation Richmond intends to award a sole source contract for (4) A71NX Makino Horizontal Machining Centers (HMC) and Three (3) A81 NX Makino Horizontal Machining Centers (HMC) manufactured by Makino or equivalent and is seeking sources that can provide a Rotary Table, Tooling, Post Processor, Pallet System, Technical Data, IUID Tag’s, Shipping, Installation and Training for the machine.
Interested parties that can provide the required (4) A71NX Makino Horizontal Machining Centers (HMC) and Three (3) A81 NX Makino Horizontal Machining Centers (HMC) with a Rotary Table, Tooling, Post Processor, Pallet System, Technical Data, IUID Tag’s, Shipping, Installation and Training may identify their interest and capability to respond to this requirement no later than the stated closing date/time.
Place of performance is Tinker AFB, OK.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Electrical & Ultrasonic Erosion | Award Notice | |
| Four Axis Horizontal Machining Centers | Award Notice | |
| 4 Axis Machining Center | Solicitation | |
| Four Axis Horizontal Machining Centers | Pre-Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| Mazak Repair 655 | Air Force Test Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity