1 NSN sources sought

NO SOLICITATION IS BEING ISSUED AT THIS TIME.  

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. 

NO SOLICITATION IS BEING ISSUED AT THIS TIME.  

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that can manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.  Phone 614 692-0639. We thank you in advance for your assistance.

NSN            NAME                
2540-01-523-2762    HANDLE, VEHICULAR DOOR, INSIDE - LH ASSEMBLY
    
HANDLE, VEHICULAR DOOR, INSIDE - LH ASSEMBLY

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD003: COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
     (MANUFACTURERS AND NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
     LISTS (QML).  THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
     SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
     QUALIFIED MANUFACTURERS LIST (QML).  QUALIFICATION REQUIREMENTS IN
     PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
     MANUFACTURERS LIST (QML)" APPLY.

CERTIFICATE OF CONFORMANCE REQUIRED

CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
     USED NOR INCORPORATED IN ANY ITEMS TO BE
     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
     SPECIFICATION REQUIREMENTS.

ZD080: SAMPLING:
     THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
     H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
     SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
     STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
     AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
     VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
     ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
     SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
     MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
     PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
     SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
     UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

IAW BASIC DRAWING NR 19207 12423360
REVISION NR     DTD 07/14/2003
PART PIECE NUMBER: 12423360-001

IAW REFERENCE DRAWING NR 19207 12420325
REVISION NR K   DTD 07/09/2020
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12423360-001
REVISION NR     DTD 01/19/2023
PART PIECE NUMBER:

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001  PRES MTHD:10  CLNG/DRY:1  PRESV MAT:00
WRAP MAT:FA  CUSH/DUNN MAT:NA  CUSH/DUNN THKNESS:B
UNIT CONT:00  OPI:M
INTRMDTE CONT:D3  INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT

---------------------------------------------------------------
Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.

NO SOLICITATION IS BEING ISSUED AT THIS TIME.