1 NSN sources sought notice

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.

 

           NO SOLICITATION IS BEING ISSUED AT THIS TIME.  

 

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.  Phone 614 692-0639. We thank you in advance for your assistance.

NSN   1240-01-319-8995             

Item Description:

PERISCOPE, ARMORED VEHICLE

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS  (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR      SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE      SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE      ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RT001: MEASURING AND TEST EQUIPMENT

CS001: THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

      TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITI
     CAL tECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE 
    WEB ADDRESS:

      https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx

      OR BY WRITING TO:

      DLA LOGISTICS INFORMATION SERVICE
     FEDERAL CENTER
     74 WASHINGTON AVE., NORTH
     BATTLE CREEK, MI 49037-3084

 

     TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
    CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE  AGREEMENT DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

     NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA
    ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE  
    AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A
    COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

     NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT
     TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH
     DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
     PERMITTED BY DODD 5230.25.

     DRAWING 12357793 REV.F, CHANGE NOTE 5:
     WAS: "SPECIFIED FOR PNS 12357793-1E-3:
     PAINT BODY PER MIL-C-46168: COLOR BLACK."
     IS: "SPECIFIED FOR PNS 12357793-1E-3:

     ENGINEERING EXCEPTION TEXT (CONTINUED):
     PAINT BODY PER MIL-DTL-53039B OR MIL-DTL-64159: COLOR BLACK."

     DRAWING 12357793 REV.F, CHANGE NOTE 6:
     WAS: "SPECIFIED FOR PNS 12357793-18-3 STAMP ONTO BLOCK "LASER SAFETY
     CODE B" IN 1/8 INCH LETTERS WITH RED INDELIBLE INK PER MIL-I-43553.
     IS: "SPECIFIED FOR PNS 12357793-18-3 STAMP ONTO BLOCK "LASER SAFETY  
     CODE B" IN 1/8 INCH LETTERS WITH RED INDELBLE INK PER A-A-56032."

ZD003: A metal casting process was identified as a means to manufacture this
     item.   Tooling is required to produce a casting.  For sourcing,
     tooling, materials or other information, please contact the appropriate
     assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land
     & Maritime Supply Chains) DSCC.cast.forge@dla.mil 

CS240: NOTE: THIS IS A RESTRICTED SOURCE ITEM
     MANUFACTURED TO THE OEM DRAWING(S) CITED
     HEREIN AND AS OF THE DATE OF THIS SOLICITATION
     ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN
     PREQUALIFIED TO MANUFACTURE THE ITEM.

     OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S
     PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND
     OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR
     THE INTENDED APPLICATION AS PER DLAI 3200.1,
     ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED
     PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE
     TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY
     REST WITH THE GOVERNMENT DESIGN CONTROL
     ACTIVITY.

 

CQ006: "CONTRACTOR/MANUFACTURER IS REQUIRED TO 
     ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT
     MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994,
     AMERICAN NATIONAL STANDARD FOR CALIBRATION -
     CALIBRATION LABORATORIES AND MEASURING AND TEST
     EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1,
     QUALITY ASSURANCE REQUIREMENTS FOR MEASURING
     EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION
     SYSTEM FOR MEASURING EQUIPMENT."

 

CRITICAL APPLICATION ITEM

     IAW BASIC DRAWING NR 19207 12357792

     REVISION NR P   DTD 08/26/1999

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12357797

     REVISION NR E   DTD 11/27/1996

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12579607

     REVISION NR C   DTD 08/04/2009

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 7680606

     REVISION NR W   DTD 06/22/1998

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 10940477

     REVISION NR E   DTD 11/21/2012

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 7633134

     REVISION NR U   DTD 01/09/2008

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 7632973

     REVISION NR F   DTD 08/10/1993

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 7633067

     REVISION NR J   DTD 07/12/1996

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 7633133

     REVISION NR J   DTD 05/19/1998

     PART PIECE NUMBER:

     IAW REFERENCE QAP 19207 12357797

     REVISION NR C   DTD 01/11/1999

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12357796

     REVISION NR F   DTD 08/19/1997

     PART PIECE NUMBER:

     IAW REFERENCE QAP 19200 12357796

     REVISION NR A   DTD 06/07/1999

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12357792

     REVISION NR     DTD 08/19/2014

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12357792

     REVISION NR C   DTD 02/19/2002

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19200 12357793

     REVISION NR F   DTD 05/19/1998

     PART PIECE NUMBER:

     IAW REFERENCE QAP 19200 12357792

     REVISION NR C   DTD 01/11/1999

     PART PIECE NUMBER: 

     IAW REFERENCE DRAWING NR 19200 7641866

     REVISION NR R   DTD 12/12/1997

     PART PIECE NUMBER:

 

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001  PRES MTHD:ZZ  CLNG/DRY:X  PRESV MAT:XX

WRAP MAT:XX  CUSH/DUNN MAT:XX  CUSH/DUNN THKNESS:X

UNIT CONT:XX  OPI:A

INTRMDTE CONT:XX  INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

 PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008    ZZ shall be IAW SPI P12357792. M-41, unit container shall be IAW ASTM-D-5118.

Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.