W912PB18Q3151clin1fryer.doc

1 ea FRYER SET for wall hanging installation, 850mm, consisting of:

TO REPLACE CURRENT UNITS, MUST BE EXACT ITEMS TO MATCH WALLMOUNTING ON EXISTING INSTALLATION WALL AND TO FIT EXISTING SPACE MUST BE WALL HANGING EQUIPMENT NO FLOOR STANDING ITEMS

POSSIBLE DUE TO SANITATION REQUIREMENTS AND DESIGN OF FACILITY EQUIPMENT INSTALLATION

2x Fryer PEF 180 1x Fryer Drop station

1x H carrier frame connecting both fryers over drop station

2x U shape stainless steel covers for installation between fryers and drop station

2 ea FRYER ELECTRIC, EXTRA LARGE, WALL‐HANGING

Kueppersbusch Großkuechentechnik Model No. PEF180 Electric Deep Fat Fryer with raising/lowering feature and sliding basket, special custom design for hanging on 300mm wide installation wall –not designed for floor‐standing applications, to replace exact current unit, with PE‐controller controls, Control panel 150mm, with built‐in relays, casing enclosed with screwed in‐place and removable front cover, seamlessly integrated basin/vat 800x560x220 mm with capacity 55 / 83,5 L, emptying via drain with tangent draw off DN40 ‐ R 1½" made of chromium‐plated brass to front., electrically controlled heating, in back with lifting cylinder for lifting platform in the top at the rear; deep frying basket designed as moving basket with rollers and bottom flaps for emptying the food in the adjacent deep fryer storage bin PUF. Lifting platform with runners; stop on the left or right adjustable via assembly set (accessories), Or-Equal.

Construction in stainless Steel (CrNiSt): appliance frame with pressure struts, support angles, cover plate, basin and lid, raising/ lowering feature, deep fryer basket, runners as well as appliance paneling made of nickel‐chromium steel 1.4301. Tubular heating elements made of CrNiTiSt 1.4541.

Efficiency design: Heat insulation with glass‐fiber needled felt in compliance with the latest revisions (Technical Regulations for Hazardous Materials TRGS 905 and Directive 97/69/EC of the European Commission). Heat insulation coated on one side with aluminum foil and at least 15 mm thick. Appliance outer surfaces ground with 240‐grain sandpaper and then rubbed down with 180 Scotch tape.

Mounting suspension design: 2 support angles consisting of 8 x 80 mm L‐section at the rear of the cover plate, welded to the appliance frame, for attachment to the installation wall; Simple alignment of the appliance on the installation wall through easy adjustment feature in all 3 directions; adjustment path 8 mm (height) and 10 mm (depth).

Appliance secured against movement by screw connections.

Appliance prepared for rear connection as a standard feature; appliance without rear panel to simplify installation.

Controls: Electronics with TTY interface as standard feature; with central converter suitable for connection to various other interfaces, e.g. RS232, RS485, RS422 and CAN. Converter not included in the scope of delivery.

Accessories included: 1 lid for vat, 1 moving basket 650 x 435 x 180 mm with bottom flaps, 1 assembly set (stop devices for moving basket)

Number of basins: 1

Exterior dimensions wxdxh: 1000 x 850 x 602 mm (39.4x33.5x23.7”)

Electric Specs: 400 V/50 Hz/3Ph, 60A, CE‐certified

Max Connected load: 39.9 kW

NOTE: Attached is detailed specification sheet ‐ only available in German at this time

ADDITIONAL ITEMS:

1 ea CARRIER FRAME Kueppersbusch Großkuechentechnik Model No. ZUB745 Custom carrier frame, double H‐design, for mobile basket with rollers and bottom flaps to allow for easy emptying of fried foods into fryer storage bin PUF, to be placed between two Kueppersbusch fryers moel PEF180 or PEF 188, Overall Dimensions wxdxh: 1260x564x50mm German at this time 1 ea SPREADER CABINET Kueppersbusch Großkuechentechnik Model No. PUF080

DEEP FRYER STORAGE BIN, special custom design for hanging on 300mm wide installation wall –not designed for floor‐standing applications, to replace exact current unit, combine with matchingfryers for high volume fryer station, Top surface with sound‐insulating lining underneath and supported by section grid, top with seamlessly welded opening/chute 490 x 450 mm with horizontal partition strip for dispensing fried foods from basket into storage container, at the corners of opening with 4 set screws to affix the runner frame for guiding the deep frying basket between PUF and large deep fryer PEF 188 (optional item), underneath chute with open cupboard 540 x 670 x 450 mm with hygienic design standard, with two pairs of rails for 2 x GN 2/1‐200mm high or 4 x GN 1/1‐200 mm high.

Construction in stainless Steel (CrNiSt): appliance frame with pressure struts, support angles, cover plate, appliance panelling as well as bottom, top and walls of interior made of nickel‐chromium steel 1.4301.

Mounting suspension design: 2 support angles consisting of 8 x 80 mm L‐section at the rear of the cover plate, welded to the appliance frame, for attachment to the installation wall; Simple alignment of the appliance on the installation wall through easy adjustment feature in all 3 directions; adjustment path 8 mm (height) and 10 mm (depth). Appliance secured against movement by screw connections. To be located left or right of the large deep fat fryer PEF 188 with moving basket; connection is provided by a 50 mm wide U‐shaped dividing strip;

Dimensions wxdxh: 800x850x602mm

NOTE: Attached is detailed specification sheet ‐ only available in

2 ea U‐PROFILE CONNECTING STRIP Kueppersbusch Großkuechentechnik Model No. ZUB969‐XS1

U‐Profile frame connecting strip 50mm, with front cover strip, suited for use with wall‐hanging equipment with high equipment body, to be attached left or right of wall‐hanging unit, width: 50mm To be placed between PEF180‐PUF080‐PEF180.

1 ea

FEM Food Equipment Marketing Model No. WARRANTY

1 year warranty for parts and labor including travel time except for misuse, willful damages and wear‐and‐tear parts, includes ON‐SITE SERVICE, available support during regular business hours in Germany and parts support throughout lifetime of equipment

INSTALLATION:

Model No. Disconect wall mounted existing fryer set and large electric fryers and INSTALL/SET UP, hook up and installation of equipment to preinstalled/ existing supply lines within no more than 6 meters of set up location. Work performed between 19:00 and 0600 hours (overnight) contractor is responsible to connect equipment to all required connection points such as electric power, water/drain (where applicable) must be provided if not in according to manufacturer requirements at the install site at time of set up/installation. Access must be via dock, level floor or elevator. ACCESS TO FACILITY AND CONTINUED WORK OVERNIGHT MUST BE ENSURED BY THE GOVERNMENT. ALL NECESSARY ELECTRICAL, WATER AND OTHER SUPPLY POINTS MUST AVAILABLE AND ACCESSIBLE during worktime at the dining facility. 1x Installation on site at DFAC Bldg. 101 overnight between 19pm and 6am, not to exceed more than 2 nights.

EXTERIOR DIMENSIONS:

See Description for each item

ELECTRIC SPECS:

Energy Source: 400 V, Tripple Phase, 50 HZ

Plug: 400 V - 64 Am Cable:

direct installation

Equipment must be CE-Certified.

See Description for each item.

WARRANTY:

1 year for parts and labor except for misuse, willful damages and wear‐and‐tear parts, includes ON‐SITE SERVICE, available support during regular business hours in Germany and parts support throughout lifetime of equipment.

S. 3