W912PB18Q3136descrenglish.pdf

Tractor Manufacturer: Valtra, Allrad Modell: T234 D Smart Touch or equal

Description All wheel Tractor with SCR‐Technic and SCR‐Catalyzer, without maintenance intensive diesel particle filter (DPF).

Tractoy with spacious and quit cabin (max. 70,0 dB), drivers seat roatable 180 degrees, back‐up cam, upper heaf lights and LED work lights, front lift, cooled brakes with brake booster, high ground clearance at least 60 cm, anf flat bottom with steel plate, seoerate oil circuits for hydraulics and transmission, lifting capacity at least 95kN .

engine ‐ Six‐cylinder‐Turbodiesel to emission standard Stage 4 ‐ Displacement min. 7.400 ccm ‐ Power min. 235 PS / 173 kW / 930 Nm ‐ Max. Power with Boost: min. 250 PS / 184 kW / 1000 Nm ‐ at max. 1.900 U/min

Emission ‐ Min. Stage 4 (just SCR‐System with DOC and SCR‐Katalysatoren)

Transmission ‐ Infinitely variable Transmission witht min. 4 departments (CVT) ‐ PTO: 540E / 1000 / 1000E U/min, activated via switch in cabin ‐ Sigma Power PTO‐Boost (min. 15 PS additional)

Changing shaft ‐ PTO shaft: 6‐splines, 35 mm, 1 Stück ‐ PTO shaft: 20‐splines, 45 mm, 1 Stück ‐ PTO shaft: 6‐splines, 45 mm, 1 Stück

Speed ‐ continuously: min. 0 ‐ 50 km/h ‐ automatic electronic gear change

Frame ‐ Engine Block heater to heat up the cooling water to operating temerature ‐ Industrial front axle with 4WD with Heavy Duty Hi‐Lock with steering sensor ‐ Wide rear mud guard, total width ca. 2550 mm ‐ Tool box ‐ Air pressure set ‐ Front suspension ‐ Front mud guards 4WD ‐ 2‐way pneumatic brakes ‐ Steel underside protection plate ‐ ABS trailer socket, IOS 7638 for ABS

W912PB18Q3136

Tank volume ‐ Fuel tank Diesel, min. 380 Liter ‐ Fuel tank AdBlue, min. 70 Liter

Brakes

‐ Rear axle brake: wet multiple disc brake mit hydraulic brake boost weight

‐ With full tanks: max. 7,3 t ‐ Gewichtsverteilung VA/HA %: 40/60

Hubload

‐ Front axle: min. 5.500 kg ‐ Rear axle: min. 9.000 kg ‐ Total weight: min. 13.500 kg

Hydraulik

‐ Free return in 1" Hydraulic, return 1“, via return filter connected with the Hydraulic fuel tank.

unpressurised

‐ Load‐Sensing‐Hydraulikpump, power min. 160 l/min, with additional fuel cooler, supply of the auxiliary consumer extra pumps. Lifting capacity for the workshydraulik min. 160 Liter

‐ EHR + Radar slip control, electr hoist unit (EHR) Auto Control B, with vibration damping and traction control .

‐ Lifting height rear linake: min. 95 kN ‐ Height rear linkage: mind 850 mm ‐ On / Off Ventil rear, 1 EA (black/white) Ventil mit geringem Durchfluss. Operating from cabin or the mudguard ‐ Four valve package, 4 Stück + Power Beyond‐Anschluss, CAN gesteuerte elektronische valves, time and amount adjustable ‐ Front powerlift: min. 51 kN ‐ 1 pair of front quick coupling for front linkage ‐ 2 pcs front valves, controling for front, ‐ Upper link front, telescopic, mechanically adjustable ball end on both sides, fast catching clutch quick‐release coupling Kat. 3 ‐ Front‐end loader, operating via front additional control valves, Fronthydraulik with quick coupling operated via armrest ‐ Front power take off ‐ On / Off control valve black/white) Ventil for hydraulic hub bar. Control from cabin

Towing devices

‐ Without drawbar ‐ without Pick Up Hitch ‐ Std frame + K80, 390 mm wide towing device, min 5 Positios for clamping with min. 2000 kg support weight in the and min. 4000 kg auf K80.

‐ Trailer coupling Scharmueller 38 mm (A11) ‐ Remote mech. Clamping release

Three point linkage ‐ HD lift rod mech. heavy, lift rod, hydraulic right hand ‐ HD lower linkage heavy duty Kat. 3 + 3/3 – HD ‐ Side limiter, mechanical ‐ Top link, hydraulic ball hook

Cabin

‐ Suspended cab ‐ Air s drivers seat +, with automatic weight adjustment, lengthswise and across, ‐ seat heater, Box for Documents ‐ rotating drivers seat, min. 180 Grad ‐ cabin , 1‐door ‐ cabin inner noise, max. 70 dB ‐ Smart Touch armrest with hydraulic‐Joystick ‐ Air conditioning manuell + footwell heating ‐ Auxiliary heating with timer ‐ Rear windshield wiper ‐ Passenger seat with safety belt, backrest foldaway ‐ Windscreen wiper wide angle, min. 270 Grad ‐ Skyview roof with polycarbonat Dachfenster ‐ Glass area with roof window, min. 6 qm ‐ Twin Trac and Quick Steer ‐ Windscreen laminated heated ‐ Heated rear window ‐ Right side window wiper ‐ External PTO control buttons, ‐ U‐Pilot, Smart Touch Terminal, for repeating operations ‐ Smart Touch Terminal ‐ Valtra Connect Ready ‐ Ashtray with cigarettelighter ‐ DIN plug‐in 12V ‐ Signal plug‐in for speed signal ‐ Isobus (ISO 11783) with connecting plug‐in for Data transfer ‐ Roof top working light ‐ Monitor mount ‐ Electric mirrows and heating ‐ Radio with spaeker ‐ Beacon lights yellow, left, 1 EA ‐ Cooler box ‐ back‐up cam for working devices at the heck ‐ work lights, two front, and four back lights on the roof and midway mounted front and rear lights. premium LED

Tires ‐ 710/70 R38 + 600/65 R28 Trelleborg TM 800 auf fest fixt rim mounted colour

- RAL 2011, Kommunal‐Orange

Brakes

‐ 2‐line air brakes

Safety

‐ Fire extinguisher 6 kg with mounting ‐ Safety package: First aid Set, warning vests ‐ Warning mark ‐ Protective steel plate underneath ‐ Safety camaera pack ‐ beacon lights left,, 1EA, Measurements

‐ ground clearance: min. 60 cm ‐ wheelbase: min. 2,95 m ‐ turning radius: max. 5,25 m

Warranty Warranty extension 24 month

Hardware check CE‐ conformation declaration GS‐sign

Dokcumentation Repair manual in German and English, EA 3 Manual operating in German and English, EA 3 Spare / Repalcement part list in German and English or CD, EA 3

Service / Inspection Service package for 1. Service First Service after 200 hours with all needed parts and Oils.

The service has to be performed on the DPW premises in Vilseck, Buildg. # 144. The machine‐Hall may be used for the service. All needed tools and parts have to be provided by the delivering firm.

Delivery / Transfer The tractor must be delivered assembled and ready for operation. All needed parts and Attachments must be in included in the delivery.

Instruction / Briefing and demonstration for the maintenance and operation personnel has to be accomplished within four (4) workdays after delivery by qualified maintenance personnel of the manufacturer and arranged deadline with the responsible department.

Duration of the instruction training: 8 hours.

The instruction training has to be carried out in german language.

The transfer has to be performed on the DPW premises in Vilseck , Buildg. # 144. The machine‐Hall may be used for the transfer and Intsruction. All needed tools and parts have to be provided by the delivering firm.

No additional costs are allowed to be raised or demanded for approaching, mounting or construction assembling, optionally modifications, needed tool or material, instruction training, schooling, transportation costs, etc.