Section_J_Attachment_List_.pdf

SECTION J

LIST OF ATTACHMENTS

Attachment No. Description Line Item No.

J-1 Checklist for Undocking DD-1

J-2 Sketch of Hopper Door’s Pins & Bushings DD-7

J-3 Section Through Hinge Pin DD-7

J-4 Lower Push-Pull Rods DD-7

J-5 Hopper Doors Cross Section DD-7

J-6 Hopper Door – Flat Bars DD-7

J-7 Athwartship – Longitudinal Cross Section HH-2

J-8 Layout of Tanks – Voids - Cofferdams HH-14

J-9 Waterblast Surface Preparation Standard HH-19

J-10 Existing Coating HH-20

J-11 0.75 inch Hinge Plate Replacement DD-7

J-12 Weld Seam Repair on Collection Pipes MD-3

J-13 Longitudinal Reinforced Plate HH-2

J-14 Bilge – SW Pipe Replacement MA-4

J-15 Dock Trails TR-2

J-16 Seawater Valves Replacement – Pump Room MA-6

J-17 Fwd Fire Pump Piping MA-5

J-18 Descaling – Alkalinity Liquid MA-2

J-19 Government Furnished Parts D-1/H-7

J-20 Nautical Miles Chart DD-1

J-21 List Of Motors That Need Heat Lamps F-6

J-22 Starboard Stern Tube Vent Pipe MA

J-23 Accident Prevention Program Administrative Plan H-3

LMN Form 385-43R

J-24 Accident Prevention Program Hazard Analysis H-3

LMN Form 385-6-R

J-25 Accident Prevention Plan Checklist Administrative H-3

Section, LMN Form 385-7-R

J-26 Fuel Oil Transfer – Floating Plant, Form 414-R H-3

J-27 Hazardous Energy Control Program, US Dredge Wheeler H-3

J-28 Safe Clearance Log H-3

J-29 Safe Clearance Request Form H-3

J-30 Installation of Gate Valves – Engine Room MA-15

J-31 Relocate 5 inch Gate Valve – EngineRoom MA-16

Attachment J-1

Attachment J-2

A ttachm ent J-3 ent J-4 ent J-5 ttach m en t J-8

Attachment J-9 m en t J-1 m en m en

Attachment J-19

LIST OF GOVERNMENT FURNISHED PARTS

Item Part # Description Qty

DD-3 Valve disc 4 ea.

DD-3 Disc retainer bar 4 ea.

DD-3 Split collar 4 ea.

DD-3 Disc mount 4 ea.

DD-7 4013-904-403/404 Push-Pull rod 7 sets

DD-7 4013-907-204 Hopper door hinge pin 56 ea.

DD-7.7 4013-903-206 Bearing pot 10 ea.

DD-7.7 4013-907-207 Bearing pot bushing 10 ea.

DD-7.8 4013-907-207 Bearing pot bushing 40 ea.

DD-7.9 4013-907-213 Hopper door pad eye bushing 14 ea.

DD-7.9 4013-904-402 Shaft 28 ea.

DD-7.10 4013-907-406 Bushing (Push/Pull rod with eye) 14 ea.

DD-7.10,7.11 4013-904-407 Shaft 14 ea.

DD-7.11 4013-907-405 Bushing (Push/Pull rod with fork) 28 ea.

DD-7.13 920504-3, 101/211 Replacement gasket assembly 14 sets

(14 ea. for center seal, 56 ea. for peripheral)

DD-7.13, 2995 BF Goodrich, Elastolock 2995 sealant as needed

DD-7.15 4013-904-421 Lower Guide Block 28 ea.

DD-7.16 4013-904-420 Upper Guide Block 20 ea.

MP-2.4, 2.5 PR17262-1 Split Seal 2 ea.

MP-4.2 22-01-02, it. 2 Thordon Bearing, pintle pin 1 ea.

MD-1.2.1 4886-901-105 Nose ring - 18” sluice valve 10 ea.

MD-1.2.1 4886-901-108 Backing ring – 18” sluice valve 10 ea.

MD-1.2.1 4886-901-109 Rubber ring – 18” sluice valve 20 ea.

MD-1.2.2 4889-901-105 Nose ring - 24” sluice valve 4 ea.

MD-1.2.2 4889-901-108 Backing ring – 24” sluice valve 4 ea.

MD-1.2.2 4889-901-109 Rubber ring – 24” sluice valve 8 ea.

MD-1.2.3 4890-901-105 Nose ring - 26” sluice valve 4 ea.

MD-1.2.3 4890-901-108 Backing ring – 26” sluice valve 4 ea.

MD-1.2.3 4890-901-109 Rubber ring – 26” sluice valve 12 ea.

MD-1.2.4 4892-901-105 Nose ring - 30” sluice valve 6 ea.

MD-1.2.4 4892-901-108 Backing ring – 30” sluice valve 6 ea.

MD-1.2.4 4892-901-109 Rubber ring – 30” sluice valve 18 ea.

MD-1.2.5 4893-901-105 Nose ring - 32” sluice valve 4 ea.

MD-1.2.5 4893-901-108 Backing ring – 32” sluice valve 4 ea.

MD-1.2.5 4893-901-109 Rubber ring – 32” sluice valve 8 ea.

MD-1.2.6 4898-901-105 Nose ring - 43” sluice valve 2 ea.

MD-1.2.6 4898-901-108 Backing ring – 43” sluice valve 2 ea.

MD-1.2.6 4898-901-109 Rubber ring – 43” sluice valve 6 ea.

MD-6 4418-912-203 Bushing for pivot arm 2 ea.

MD-6 4418-912-233 Bushing for gimbal ring 8 ea.

MD-6 4418-912-603 Bushing for upper frame 2 ea.

MD-6 4418-912-232 Shaft for gimbal ring 4 ea.

Attachment J-19

MD-7 70006-6650-906 Gimbal Hoisting Frame Assembly 1 ea.

MD-7 1-1/2” x 175 ft Trunnion Wire Rope – Center Drag Arm 1 ea.

MD-7 1-1/2” x 335 ft Gimbal Wire Rope – Center Drag Arm 1 ea.

MD-7 1-3/4” x 465 ft Draghead Wire Rope – Center Drag Arm 1 ea.

MD-9 A-4173, A-4174 Shrink Fit Sleeve for bearing seals 2 ea.

Part # 46a

MD-9 A-4173, A-4174 Stainless Steel Sleeve 2 ea.

Part # 12

MD-9 A-4173, A-4174 Thrust Washers 2 ea.

Part # 13

MD-9 A-4173, A-4174 Split Stuffing Box 2 ea.

Part # 9

MD-9 A-4173, A-4174 Packing Gland 2 ea.

Part # 10

MD-11 5109-902 Wheel w/Bronze bushing (Trunnion) 2 ea

Part # 313 & 314

MD-11 2” x 288 ft Trunnion Wire Rope – Starboard Dragarm 1 ea.

MD-11 2” x 288 ft (LLL) Trunnion Wire Rope – Port Dragarm 1 ea.

MD-12 2” x 410 ft (RLL) Gimbal Wire Rope – Starboard Dragarm 1 ea.

MD-12 2” x 410 ft (LLL) Gimbal Wire Rope – Port Dragarm 1 ea.

MD-12 1-3/4” x 510 ft Draghead Wire Rope – Starboard Dragarm 1 ea.

MD-12 1-3/4” x 510 ft (LLL) Draghead Wire Rope – Port Dragarm 1 ea.

MA-1 Valve 12 inches butterfly valve (for Bettis actuator) 2 ea.

MA-1 Valve 10 inches butterfly valve (for Bettis actuator) 4 ea.

MA-6 Valve 18 inches butterfly valve with manual gear op. 1 ea.

MA-8 Valve 12 inches butterfly valve (for Bettis actuator) 1 ea.

MA-8 Valve 12 inches check valve 1 ea.

MA-8 Valve 12 inches butterfly valve with manual gear op. 1 ea.

EE-1 Syncro interface cards 2 ea.

Attachment J-23

Attachment J-23

Attachment J-24

Attachment J-25

Attachment J-26

Attachment J-27

Attachment J-27

Attachment J-28

Attachment J-29