20230912 Addendum 02 Chgs and Attachments.pdf

MnANG Construct DOMOPS Storage LHB Project No. 170859 FMKM169006

Issued for BID 05/10/2023

ACCESS CONTROL

28 1800 - 1

Addendum 02

SECTION 28 1800

ACCESS CONTROL

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Security access control system

1.02 RELATED REQUIREMENTS

A. Section 01 2300 - Bid Options.

B. Section 08 7100 - Door Hardware.

C. Section 26 0519 - Low-Voltage Electrical Power Conductors and Cables (600 V and Less).

D. Section 26 0534 - Conduit.

E. Section 26 0553 - Identification for Electrical Systems.

1.03 REFERENCES

A. NFPA 70 - National Electrical Code; National Fire Protection Association; 2008.

B. Air Force Instruction AFI 31-101.

C. ICD/ICS 705 - Technical Specifications for Construction and Management of Sensitive

Compartmented Information Facilities.

1.04 SYSTEM DESCRIPTION

A. Security Access Card Reader

1. Base Bid: Rough-in only

2. Bid Option: Includes cabling, terminations and devices for a complete system

3. Refer to Drawings for locations.

B. Equipment shall be compatible with AFI 31-101 and the existing Base Security Force's Advantor security system.

1.05 ADMINISTRATIVE REQUIREMENTS

A. Coordination:

1. Coordinate the installed locations with work provided under other sections or by others.

2. Notify Architect of any conflicts with or deviations from the contract documents. Obtain direction before proceeding with work.

B. Sequencing:

1. Do not install sensors and keypads until final surface finishes and painting are complete.

1.06 SUBMITTALS

A. See Section 01 3000 - Administrative Requirements, for submittal procedures.

B. Submittals for Review:

1. Product Data: Provide electrical characteristics and connection requirements.

2. Shop Drawings:

a. Provide system wiring diagram showing each device and wiring connection required.

b. Provide dimensions of control panel and controller enclosures.

C. Submittals for Information:

1. Installer Documentation: Submit documentation that all persons installing items in this section are United States Citizens.

2. Manufacturer's Installation Instructions: Indicate application conditions and limitations of use stipulated by product testing agency. Include instructions for storage, handling, protection, examination, preparation, installation, and starting of product.

D. Submittals for Closeout:

1. Project Record Documents: Record actual locations of access authorization equipment.

2. Operation and Maintenance Manual:

a. Test Reports: Include completed test reports and inspections.

Issued for BID 05/10/2023

ACCESS CONTROL

28 1800 - 2

Addendum 02

b. Product Information: Include approved shop drawings and product data.

c. Operation Data: Operating instructions.

d. Maintenance Data: Maintenance and repair procedures.

e. Documentation of Training: Indicate date of training. Include attendance roster and training outline.

3. Maintenance Materials: Furnish the following for Government's use in maintenance of project.

a. See Section 01 6000 - Product Requirements, for additional provisions.

b. Deliver keys/cards not used in initial installation to Government as directed.

1.07 QUALITY ASSURANCE

A. Conform to requirements of NFPA 70.

B. Installer Qualifications:

1. Company specializing in installing the products specified in this section with minimum three years documented experience.

2. Installers: Workers specializing in installation of Products specified in this section with minimum three years documented experience.

3. Individuals installing products in this section are documented United States Citizens.

C. Products: Furnish products listed and classified by Underwriters Laboratories Inc. as suitable for purpose specified and indicated.

1.08 MAINTENANCE SERVICE

A. Furnish service and maintenance of security access system for one year from Date of Substantial Completion.

PART 2 PRODUCTS

2.01 MANUFACTURERS

A. Security Access Control and Intrusion Detection System:

1. Advantor .

2. Substitutions: Not Permitted.

2.02 CONTROL PANEL

A. The Security Access Control System shall be manufactured by Advantor and consist of a V5

ACS Server(s), keypads, readers, door hardware, and other I/O.

B. The system shall have backup batteries capable of operating the system for 24 hours without normal AC power.

C. Data Transponders shall be an 8-input unit D. System shall include all components as required to support the following Sequence of

Operations:

1. Controlled Entry of Building

a. Use Card Reader to release strike and enter building.

b. Building shall require access control at all times.

2.03 CONTROLLERS

A. Access Control Enclosure: Advantor MR-50, 2.5 amp 12 volt power supply, 7 amp battery, PD-8.

B. Access Control Enclosure (ACE).

1. Nema 1 enclosure, 120 volt power source.

2. Relay, door strike: 2.5 amps, AC/DC.

3. Product:

a. As indicated in Intrusion Detection Device Schedule on Drawings.

b. Substitutions: Not Permitted.

Issued for BID 05/10/2023

ACCESS CONTROL

28 1800 - 3

Addendum 02

2.04 DEVICES

A. Card Reader Rough-in: 4" square, deep junction box with single gang trim ring. Provide (1) 1" empty conduit concealed within wall to above indoor accessible ceiling. Provide bushings at each end.

B. Encoded Cards: Compatible with Advantor system. Provide 20 encoded cards (Bid Option) C. Electric Strikes:

1. Refer to Section 08 7100 - Door Hardware.

2.05 SYSTEM CABLE

A. Minimum size: 18 AWG twisted shielded.

2.06 SEQUENCE OF OPERATOINS

A. Controlled Entry of Secure Space.

1. Use Card Reader with keypad to release strike and enter secure door.

a. Secure space shall require access control at all times.

B. Utilizing assigned passwords, it shall be possible to define the levels of system operation for each individual operator. System operation for individual operators shall include, but not be limited to, restricted time periods for login and default language selection at login. Operator actions range from basic monitoring to full control of the system including programming.

C. The system programming shall be user friendly. The programming shall be menu driven and include on-line "Help" as well as on-line data entry examples. The software shall utilize drop boxes for a all previously entered system-required data.

D. After installation, the customer shall be able to perform hardware configuration changes. These shall include, but not be limited to, door open time, door contact shunt time, point and reader names, when and where a cardholder is valid, and the ability to add or modify card databases as desired.

E. The file server station shall operate in both a programmed and a manual mode.

F. Basic System Capabilities

1. All databases will have the ability to ADD, DELETE, REPORT, VIEW or EDIT information.

2. Log all events by time and date.

3. Provide capability to store all or selected system transactions to a disk file.

4. Provide storage of all system transactions ina retreivable file.

PART 3 EXECUTION

3.01 INSTALLATION

A. Install in accordance with applicable codes.

B. Use 18 AWG minimum size conductors for detection and signal circuit conductors. Install wiring in conduit.

C. Make conduit and wiring connections to door hardware devices furnished and installed under

Section 08 7100.

1. Verify operating voltage of security system door release circuits, provide data to door hardware provider.

D. Provide fiber optic cable from Security System control panel to receiving station at Central

Security Building.

3.02 FIELD QUALITY CONTROL

A. Perform field inspection and testing in accordance with Section 01 4000.

B. In the presence of representative from Base Security, test entire system for proper operation.

Correct all defects.

C. Provide written certification system was installed according to manufacturer's instructions and operated properly during final acceptance test. Include certification as part of O&M manual.

Issued for BID 05/10/2023

ACCESS CONTROL

28 1800 - 4

Addendum 02

3.03 DEMONSTRATION AND TRAINING

A. Demonstrate normal and abnormal modes of operation, and required response to each.

B. Provide 2 hours of instruction each for Base personnel.

1. Conduct instruction at project site with manufacturer's representative.

END OF SECTION

KEYED SHEET NOTES

PROJECT ANCHOR BOLTS ABOVE TOP

OF BASE, PROVIDE DOUBLE NUTS FOR

LEVELING. GROUT VOID BETWEEN BASE

FLANGE & TOP OF CONRETE.

ANCHOR BOLTS FURNISHED

BY POLE MANUFACTURER.

FINISHED GRADE

GRS SWEEP, CONDUIT AND WIRE

SIZE AS INDICATED ON PLANS.

9 #4 REBAR, 12" O.C.

HORIZONTAL (19" DIA CIRCULAR)

4 #4 REBAR VERTICAL

ON 18" DIA CIRCLE

REINFORCED CONCRETE

BASE BY E.C. REFER TO

SITE PLAN FOR LOCATIONS

WHERE A 36" POLE BASE

IS REQUIRED.

3/4" PVC W/

BUSHING, #6 GND

GROUND ROD PER

SPECIFICATIONS

1" CHAMFER

BASE COVER

HANDHOLE - PROVIDE BOND

GROUND TO POLE

1" COMMUNICATION CABLE CONDUIT

6'

2'

" 1'

0'

2' - 0"

LEVEL 1

ROOF

GRADE

ELEC 106

MV

DISTRIBUTION

TRANSFORMER

T-SA/DOMOPS

PANEL A

208Y/120VAC

3-PHASE, 4 WIRE

200A MCB

PANEL B

208Y/120VAC

3-PHASE, 4 WIRE

200A MCB

T1

MDP

480Y/277VAC

3-PHASE, 4 WIRE

400A MCB

SERVICE ENTRANCE

RATED

2 3

SPD

TRANSFORMER T1: 480VAC

DELTA PRIMARY, 208Y/120VAC

SECONDARY, 75 KVA

SPD SPD

SECONDARY

CONNECTION

CABINET

SCC-SA

M

M

M

FEEDER

NUMBER

FROM TO VOLTAGE PHASE

FEEDER SCHEDULE

UTILITY XFMR MDP 277/480 3 2 @ 3" 3#3/0 AWG Cu1

MDP XFMR T1 480 3 1 @ 1.25"2

XFMR T1 PANELS A & B 120/208 3 1 @ 2"3

CONDUIT

QNTY & SIZE

PHASE COND

QNTY & SIZE

NEUT COND

QNTY & SIZE

GROUND COND

QNTY & SIZE

3#2 AWG Cu

3#3/0 AWG Cu

1#3/0 AWG Cu

(NONE)

1#3/0 AWG Cu

1#3 AWG Cu

1#8 AWG Cu

1#6 AWG Cu

PVC SLEEVE

LINK SEAL

SEE PLANS FOR SIZE

& LOCATION

COPPERCLAD

GROUND ROD

PER SPECIFICATION

SECTION 13100

EXOTHERMIC CONNECTION

PARALLEL SPLICER

BIMETAL SPLICER

EXOTHERMIC

CONNECTION

COPPERCLAD

GROUND ROD

PER SPECIFICATION

SECTION 13100 EXOTHERMIC

CONNECTION

COPPERCLAD STEEL

GROUND ROD

CROSS RUN

CABLE CLAMP

ENCIRCLING

COUNTERPOISE

NO. GWP-1024: 10" DIA x 24"

PVC GROUND WELL WITH COVER

BARE CU

CONDUCTOR

COUNTERPOISE

CONDUCTOR

FIBER OPTIC

CABLES

CONCRETE

UNDERGROUND

WARNING TAPE

GRADE

2' - 3"

0'

1/ 2"

M A

X I M

U M

M

IN

IM

U

M

0'

0' - 6" 0' - 7 1/2" 0' - 7 1/2" 0' - 6"

4" CONDUIT4" CONDUIT WITH 3-CELL

TEXTILE INNERDUCT2 2

1. PROVIDE SCHEDULED FEEDER FROM EXISTING SPARE METER

LOCATED IN EXISTING SECONDARY CONNECTION CABINET.

FILE:

DRAWN BY:

CHECKED BY:

PROJ. NO:

DRAWING NO:

DRAWING TITLE:

PROJECT NAME:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

Typed or Printed Name:

Date: Reg. No.:

THIS SQUARE APPEARS 1/2"x1/2"

ON FULL SIZE SHEETS

CLIENT:

DULUTH, MINNESOTA

148th FIGHTER WING

MINNESOTA AIR

NATIONAL GUARD

CONSTRUCT

DOMOPS STORAGE

170859 MnANG DOMOPS Storage MEP19 Central.rvt

FMKM169006

COPYRIGHT 2023 BY LHB, INC. ALL RIGHTS RESERVED.

NO DATE ISSUED FOR

21 W. Superior St., Ste 500 | Duluth, MN 55802 | 218.727.8446

08/11/2020 B.3 FINAL SUBMITTAL

MARK J. VINCENT

52349

05/10/2023 BID

B

IM

/M n A

N G

P ro je c ts

/1

M n A

N G

D O

M O

P S

S to ra g e M

E P

C e n tr a l.

rv t

/1

/2

:2

:3

P

M

E501

05/10/2023

AML

MJV

170859

ELECTRICAL DETAILS

AND DIAGRAMS

NOT TO SCALE1

LIGHT POLE BASE DETAIL

NOT TO SCALE6

ELECTRICAL POWER DISTRIBUTION DIAGRAM

NOT TO SCALE2

FOUNDATION PENETRATION DETAIL

NOT TO SCALE3

CONNECTION AND SPLICE DETAILS

NOT TO SCALE4

GROUND ACCESS WELL DETAIL

NOT TO SCALE5

DUCT BANK DETAIL

NO DATE REVISION

1 06/28/2021 ADDENDUM 01

2 09/11/2023 ADDENDUM 02

Typed or Printed Name:

Date: Reg. No.:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

AUSTEN JAMES BRYAN

09/11/2023 57136

A. UNIVERSAL AND MULTI-VOLT DRIVERS ACCEPTABLE.

B. WHERE "APPROVED EQUAL" IS LISTED IN THE MANUFACTURER COLUMN, FIXTURES MUST BE SUBMITTED AS A SUBSTITUTION FOR APPROVAL PRIOR TO BID SUBMISSION.

GENERAL NOTES:

A. OCCUPANCY SENSOR TIME OUT IS 15 MINUTES UNLESS OTHERWISE NOTED.

GENERAL NOTES:

1. NOTE 1.

SCHEDULE NOTES:

A. DEVICES PROVIDED BY DIVISION CALLED OUT IN COLUMN. DIVISION 28 CONTRACTOR SHALL WIRE ALL LOW VOLTAGE CABLING/COMPONENTS AND DIVISION 26 CONTRACTOR SHALL PROVIDE ALL 120V POWER.

B. VOLTAGE REQUIREMENTS TO BE COORDINATED WITH DOOR HARDWARE.

C. COORDINATE WITH OWNER FOR SCHEDULING OF INSTALLATION.

D. DIVISION 26 CONTRACTOR SHALL SUPPLY 120V POWER TO ACCESS CONTROL POWER SUPPLY LOCATIONS AS SHOWN.

GENERAL NOTES:

1. BASE BID: PROVIDE ROUGH-IN FOR FUTURE CARD READER / ACCESS CONTROL SYSTEM. AS PART OF A BID OPTION: PROVIDE AND INSTALL CABLING, DEVICES AND TERMINATIONS FOR A COMPLETE ACCESS CONTROL SYSTEM. REFER TO SPECIFICATIONS.

SCHEDULE NOTES:

FILE:

DRAWN BY:

CHECKED BY:

PROJ. NO:

DRAWING NO:

DRAWING TITLE:

PROJECT NAME:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

Typed or Printed Name:

Date: Reg. No.:

THIS SQUARE APPEARS 1/2"x1/2"

ON FULL SIZE SHEETS

CLIENT:

DULUTH, MINNESOTA

148th FIGHTER WING

MINNESOTA AIR

NATIONAL GUARD

CONSTRUCT

DOMOPS STORAGE

170859 MnANG DOMOPS Storage MEP19 Central.rvt

FMKM169006

COPYRIGHT 2023 BY LHB, INC. ALL RIGHTS RESERVED.

NO DATE ISSUED FOR

21 W. Superior St., Ste 500 | Duluth, MN 55802 | 218.727.8446

08/11/2020 B.3 FINAL SUBMITTAL

MARK J. VINCENT

52349

05/10/2023 BID

B

IM

/M n A

N G

P ro je c ts

/1

M n A

N G

D O

M O

P S

S to ra g e M

E P

C e n tr a l.

rv t

/1

/2

:2

:3

P

M

E601

05/10/2023

AML

MJV

170859

ELECTRICAL

SCHEDULES

LIGHTING CONTROL DEVICE SCHEDULE

TYPE DESCRIPTION MANUFACTURER

DT OCCUPANCY SENSOR / HIGH BAY WITH AUXILIARY

CONTACTS FOR CONNECTION TO HVAC CONTROLS.

SEE

SPECIFICATIONS

LVD SINGLE GANG, SINGLE PUSHBUTTON FOR LIGHTING

CONTROL.

SEE

SPECIFICATIONS

OSIR OCCUPANCY SENSOR / SWITCH PASSIVE INFRARED,

WHITE WITH STAINLESS STEEL WALL PLATE.

SEE

SPECIFICATIONS

LIGHTING FIXTURE SCHEDULE

TYPE

FIXTURE HOUSING LIGHT SOURCE

DRIVER VOLT WATT NOTEDESCRIPTION LENS / DIFFUSER MOUNTING SOURCE

MINIMUM

LUMEN

OUTPUT

(lm)

MINIMUM

COLOR

TEMP

(KELVIN) CRI

MINIMUM

PROJECTED LIFE

(HOURS)

E1 CONTEMPORARY LED SINGLE FACED EXIT SIGN

WITH BLACK POWDER PAINT ALUMINUM

HOUSING, BRUSHED ALUMINUM FACE, RED

LETTERS, AND CHEVRON ARROWS AS SHOWN ON

PLANS.

--- UNIVERSAL LED --- --- --- 50,000 --- 120 V 5 W

H1 14" X 11" LED HIGH BAY WITH WIDE DISTRIBUTION,

HIGH EFFICIENCY, DIFFUSE LENS, INTEGRAL

DAYLIGHT / OCCUPANCY SENSOR, 5' Y-CABLE &

HOOK, 6' 18GA CORD, 20A TWIST-LOCK PLUG,

WHITE FINISH.

120 DEGREE

DIFFUSE LENS

CABLE

SUSPENDED

ANTI-SWAY

LED 18,000 4000 --- L70 100,000 DIMMABLE

0-10V

277 V 88 W

H1-E 14" X 11" LED HIGH BAY WITH WIDE DISTRIBUTION,

HIGH EFFICIENCY, DIFFUSE LENS, INTEGRAL

DAYLIGHT / OCCUPANCY SENSOR, 5' Y-CABLE &

HOOK, 6' 18GA CORD, 20A TWIST-LOCK PLUG,

WHITE FINISH.

120 DEGREE

DIFFUSE LENS

CABLE

SUSPENDED

ANTI-SWAY

LED 18,000 4000 --- L70 100,000 DIMMABLE

0-10V

277 V 88 W

S1 4' LONG LED STRIP, WIDE DISTRIBUTION. FULL FROSTED

ACRYLIC

DIFFUSE DROP

LENS

SURFACE LED 4,900 3500 --- L87 60,000 DIMMABLE

0-10V

10-100%

277 V 41 W

S1-E 4' LONG LED STRIP, WIDE DISTRIBUTION. FULL FROSTED

ACRYLIC

DIFFUSE DROP

LENS

SURFACE LED 4,900 3500 --- L87 60,000 DIMMABLE

0-10V

10-100%

277 V 41 W

AA1 SINGLE-HEAD FULL CUT-OFF AREA LUMINAIRE

WITH DIE-CAST ALUMINUM HOUSING, TYPE IV

MEDIUM DISTRIBUTION, IP-65 RATED, EMBEDDED

MULTI-LEVEL 30%-100% MOTION SENSOR AND

NEMA 7-PIN RECEPTACLE FOR PHOTOCELL.

ACRYLIC 25' POLE LED 10,613 3000 80 L70 100,000 LED DRIVER 120 V 89 W

WW1 LED WALL PACK WITH CAST ALUMINUM HOUSING,

INTEGRAL SURGE PROTECTION, LEAF / DEBRIS

GUARD, TYPE 3 OPTICS, IDA DARK SKY

COMPLIANT, UL LISTED FOR WET LOCATION,

EMBEDDED MULTI-LEVEL 30%-100% MOTION

SENSOR, AND NEMA 7-PIN RECEPTACLE FOR

PHOTOCELL.

LEAF / DEBRIS

GUARD

WALL

SURFACE

LED 3,343 4000 70+ L70 150,000 LED DRIVER 277 V 47 W

WW1-E LED WALL PACK WITH CAST ALUMINUM HOUSING,

INTEGRAL SURGE PROTECTION, LEAF / DEBRIS

GUARD, TYPE 3 OPTICS, IDA DARK SKY

COMPLIANT, UL LISTED FOR WET LOCATION,

EMBEDDED MULTI-LEVEL 30%-100% MOTION

SENSOR, AND NEMA 7-PIN RECEPTACLE FOR

PHOTOCELL.

LEAF / DEBRIS

GUARD

WALL

SURFACE

LED 3,343 4000 70+ L70 150,000 LED DRIVER 277 V 47 W

LIGHTING CONTROL SEQUENCE OF OPERATIONS SCHEDULE

ROOM ROOM NAME

FC

TARGET

LINE

VOLTAGE

SWITCH

TIME SCHEDULED OCCUPANCY SENSORS OVERRIDE

DAYLIGHT

SENSOR

POWER

PACK (PLUG

LOAD) NOTES

PHOTO

CELL

TIME

CLOCK

AUTO

ON

MANUAL

ON

TIME

DELAY

WALL

SWITCHES

WALL

DIMMERS

MULTI-

ZONE

100 BSERV 50 --- --- --- X --- 15 MIN --- X --- --- X

101 VEHICLE STORAGE 50 --- --- --- X --- 15 MIN --- X --- --- X

102 STORAGE 50 --- --- --- X --- 15 MIN --- X --- --- X

103 TLT 10 --- --- --- X --- 15 MIN X --- --- --- ---

104 COMM 10 --- --- --- --- X --- X --- --- --- ---

105 MECH 10 --- --- --- --- X --- X --- --- --- ---

106 ELEC 10 --- --- --- --- X --- X --- --- --- ---

DOOR HARDWARE, FIRE ALARM, ACCESS CONTROL & INTRUSION DETECTION REQUIREMENTS

LOCATION DOOR NO.

HARDWARE SET

(DIV 08)

POWER TRANSFER

(DIV 08)

ELECTRIC

TRANSFER HINGE

(DIV 08)

AUTO DOOR

OPERATOR/ACTUA

TORS (DIV 08)

DOOR POSITION

SWITCH (DIV 28)

DOOR OPEN

AUDIBLE DEVICE

(DIV 28)

VIDEO

INTERCOM/DOOR

RELEASE (DIV 08)

LATCH

RETRACTION

(DIV 08)

ELECTRIC STRIKE

(DIV 08)

DURESS PUSH

BUTTON (DIV 28)

REQUEST TO EXIT

(DIV 28)

DOOR POSITION

SWITCH - OH DOOR

(DIV 08)

RADIO CONTROL

(DIV 08)

CARD READER

(DIV 28) KEYPAD (DIV 28)

POWER SUPPLY

(DIV 28)

MAGNETIC HOLD

OPEN (DIV 28)

FIRE ALARM

INTERFACE (DIV 28) NOTES

BSERV 100 100.1 5 --- --- --- SEE NOTE 1 --- --- --- SEE NOTE 1 --- SEE NOTE 1 --- --- XX --- SEE NOTE 1 --- ---

VEHICLE STORAGE 101 101.8 5 --- --- --- SEE NOTE 1 --- --- --- SEE NOTE 1 --- SEE NOTE 1 --- --- XX --- SEE NOTE 1 --- ---

STORAGE 102 102.1 5 --- --- --- SEE NOTE 1 --- --- --- SEE NOTE 1 --- SEE NOTE 1 --- --- XX --- SEE NOTE 1 --- ---

STORAGE 102 102.7 5 --- --- --- SEE NOTE 1 --- --- --- SEE NOTE 1 --- SEE NOTE 1 --- --- XX --- SEE NOTE 1 --- ---

NO DATE REVISION

1 09/11/2023 ADDENDUM 02

Typed or Printed Name:

Date: Reg. No.:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

AUSTEN JAMES BRYAN

09/11/2023 57136

1. PROVIDE NEAM-3R DISCONNECT.

2. PROVIDE DISCONNECT MOUNTED 48" ABOVE GRADE BELOW EXTERIOR FAN. CONCEAL CONDUIT AND CONDUCTORS ROUTED VERTICALLY TO SERVE FAN.

3. RECEIVE PUSHBUTTON CONTROL PAD FROM MANUFACTURER AND INSTALL PER DRAWINGS. PROVIDE CONDUIT AND CONDUCTORS AND MAKE FINAL

CONNECTIONS FOR A COMPLETE AND OPERABLE INSTALLATION.

SCHEDULE NOTES:

1. NOTE 1.

SCHEDULE NOTES:

FILE:

DRAWN BY:

CHECKED BY:

PROJ. NO:

DRAWING NO:

DRAWING TITLE:

PROJECT NAME:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

Typed or Printed Name:

Date: Reg. No.:

THIS SQUARE APPEARS 1/2"x1/2"

ON FULL SIZE SHEETS

CLIENT:

DULUTH, MINNESOTA

148th FIGHTER WING

MINNESOTA AIR

NATIONAL GUARD

CONSTRUCT

DOMOPS STORAGE

170859 MnANG DOMOPS Storage MEP19 Central.rvt

FMKM169006

COPYRIGHT 2023 BY LHB, INC. ALL RIGHTS RESERVED.

NO DATE ISSUED FOR

21 W. Superior St., Ste 500 | Duluth, MN 55802 | 218.727.8446

08/11/2020 B.3 FINAL SUBMITTAL

MARK J. VINCENT

52349

05/10/2023 BID

B

IM

/M n A

N G

P ro je c ts

/1

M n A

N G

D O

M O

P S

S to ra g e M

E P

C e n tr a l.

rv t

/1

/2

:2

:3

P

M

E602

05/10/2023

AML

MJV

170859

ELECTRICAL

SCHEDULES

ELECTRICAL EQUIPMENT SCHEDULE

NO. DESCRIPTION ROOM

LOAD

VOLT PHASE

CONDUIT &

WIRE SIZE

STARTER

COMPONENT

CONTROL DEVICE

COMPONENT

DISCONNECT

COMPONENT NOTESHP A W

ACCU-1 AIR COOLED CONDENSING UNIT 200 7 0 208 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS

EB-1 ELECTRIC HEATER 105,106 0 761 208 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS

EF-1 EXHAUST FAN ROOF 2 0 0 208 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS 1,2

EF-2 EXHAUST FAN 106 4/25 0 0 120 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS 1,2

ERV-1 AIR TO AIR HEAT EXCHANGER 200 1.5 0 0 208 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS

FC-1 FAN COIL UNIT 104 1 0 208 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 NFS

OHD OVERHEAD DOOR VARIES 5 0 120 1 2#12, 1#12G,

1/2"C

SEE NOTE SEE NOTE SEE NOTE 3

P-1 PUMP 105 2 0 120 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 MRS

UH-1 UNIT HEATER 102 1/4 0 0 120 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 INTEGRAL

UH-2 UNIT HEATER 101 1/2 0 0 120 1 2#12, 1#12G,

1/2"C

BY MANUF BY DIV 23 INTEGRAL

WH-1 WATER HEATER 105 0 0 120 1 2#12, 1#12G,

1/2"C

BY MAUF BY DIV 23 MRS

SPECIFIC USE EQUIPMENT SCHEDULE

NO. DESCRIPTION ROOM

LOAD

VOLT PHASE

CONDUIT &

WIRE SIZE CONNECTION

CONTROL

DEVICE

COMPONENT

DISCONNECT

COMPONENT NOTEA

EQ-01 30A SHORELINE BATTERY CHARGER PIN & SLEEVE 100 30 120 1 3-WIRE RCPT INTEGRAL

EQ-02 SHORELINE INLET TWIST LOCK 100 50 208 1 4-WIRE RCPT INTEGRAL NEMA H-37

EQ-03 120V DUPLEX 101 0 120 1 3-WIRE RCPT INTEGRAL NEMA 1-15

EQ-04 PIN & SLEEVE SHORE POWER 101 30 208 3 5-WIRE RCPT INTEGRAL

EQ-05 TWIST LOCK SHORE POWER 101 50 208 1 4-WIRE RCPT INTEGRAL NEMA H-37

EQ-06 L14 30P TWIST LOCK 101 30 208 3 4-WIRE RCPT INTEGRAL NEMA H-20

EQ-07 120V DUPLEX 102 0 120 1 3-WIRE RCPT INTEGRAL NEMA 1-15

EQ-08 HUBBELL TWIST LOCK 102 50 208 3 4-WIRE RCPT INTEGRAL NEMA H-38

1. PANEL B IS FEED THROUGH LUGS AND SHOULD NOT OCCUPY THIS POLE SPACE (50,52, & 54).

NOTES:

SPEC 10400 VA 100.00% 10400 VA EST. DEMAND CURRENT: 194 A

MTR 22734 VA 104.29% 23708 VA CONNECTED CURRENT: 262 A

LITES 356 VA 125.00% 445 VA ESTIMATED DEMAND: 69907 VA

RCPT 60828 VA 58.22% 35414 VA CONNECTED LOAD: 94266 VA

Other 0 VA 0.00% 0 VA

LOAD CLASSIFICATION CONNECTED DEMAND ESTIMATED PANEL TOTALS

TOTAL AMPS: 279 A 290 A 230 A

TOTAL LOAD: 33 kVA 34 kVA 28 kVA

SPARE 20 A 1 53 0.0 23.2 54

SPARE 20 A 1 51 0.0 29.1 52

SPARE 20 A 1 49 0.0 26.6 50

3 20 A PANEL B

SPARE 20 A 1 47 0.0 0.0 48 1 20 A SPARE

SPARE 20 A 1 45 0.0 0.0 46 1 20 A SPARE

SPARE 20 A 1 43 0.0 0.0 44 1 20 A SPARE

SPARE 20 A 1 41 0.0 0.0 42 1 20 A SPARE

SECP 104 20 A 1 39 0.0 0.0 40 1 20 A HD 103

FACP 104 20 A 1 37 0.0 0.4 38 1 20 A RCPT 200

35 0.0 0.0 36 1 20 A RCPT 103

SPEC 104 20 A 2

33 0.0 0.4 34 1 20 A RCPT 105

RCPT 101 20 A 1 31 0.9 0.2 32 1 20 A RCPT 106

OHD 101 20 A 1 29 0.6 0.5 30 1 20 A RCPT 104

OHD 101 20 A 1 27 0.6 0.0 28

OHD 101 20 A 1 25 0.6 0.0 26

2 20 A SPEC 104

OHD 100 20 A 1 23 0.6 0.6 24 1 20 A OHD 102

RCPT & EQ-03 101 20 A 1 21 0.4 0.6 22 1 20 A OHD 102

RCPT 100 20 A 1 19 0.7 0.5 20 1 20 A RCPT 102,104

RCPT 101 20 A 1 17 0.4 0.2 18 1 20 A RCPT & EQ-O7 102

RCPT 101 20 A 1 15 0.4 0.9 16 1 20 A RCPT 102

RCPT 100 20 A 1 13 0.4 0.4 14 1 20 A RCPT 102

RCPT 100 20 A 1 11 0.4 0.6 12 1 20 A OHD 102

OHD 101 20 A 1 9 0.6 0.6 10 1 20 A OHD 102

OHD 101 20 A 1 7 0.6 0.6 8 1 20 A OHD 102

OHD 101 20 A 1 5 0.6 0.0 6 1 20 A SPARE

OHD 101 20 A 1 3 0.6 0.0 4 1 20 A SPARE

OHD 100 20 A 1 1 0.6 0.4 2 1 20 A LITES SITE

LOAD DESCRIPTION BKR P CKT A B C CKT P BKR LOAD DESCRIPTION

BUS AMPS: 225 AMPS

MAIN DEVICE: 225 A MAIN CB SPECIAL:

MOUNTING: SURFACE NEMA 1 A.I.C. RATING: 10,000 AMPS SYMMETRICAL

LOCATION: ELEC 106 VOLTAGE: 208Y/120 V. 3 ø 4 W.

PANELBOARD: PANEL A

NOTES:

EST. DEMAND CURRENT: 160 A

CONNECTED CURRENT: 219 A

SPEC 10400 VA 100.00% 10400 VA ESTIMATED DEMAND: 57690 VA

MTR 14485 VA 105.68% 15308 VA CONNECTED LOAD: 78860 VA

RCPT 53988 VA 59.26% 31994 VA

LOAD CLASSIFICATION CONNECTED DEMAND ESTIMATED PANEL TOTALS

TOTAL AMPS: 226 A 247 A 193 A

TOTAL LOAD: 27 kVA 29 kVA 23 kVA

SPARE 20 A 1 53 0.0 0.0 54 1 20 A SPARE

SPARE 20 A 1 51 0.0 0.0 52 1 20 A SPARE

SPARE 20 A 1 49 0.0 0.0 50 1 20 A SPARE

SPARE 20 A 1 47 0.0 0.0 48 1 20 A SPARE

SPARE 20 A 1 45 0.0 0.0 46 1 20 A SPARE

SPARE 20 A 1 43 0.0 0.0 44 1 20 A SPARE

SPARE 20 A 1 41 0.0 0.0 42 1 20 A SPARE

SPARE 20 A 1 39 0.0 0.0 40 1 20 A SPARE

SPARE 20 A 1 37 0.0 0.0 38 1 20 A SPARE

SPARE 20 A 1 35 0.0 0.0 36 1 20 A SPARE

SPARE 20 A 1 33 0.0 0.2 34 1 20 A P-1

SPARE 20 A 1 31 0.0 0.0 32 1 20 A INVERTER

SPARE 20 A 1 29 0.0 0.2 30 1 20 A WH-1

27 6.0 1.2 28 1 20 A UH-2

25 6.0 1.2 26 1 20 A UH-2RCPT 102 50 A 3

23 6.0 1.4 24 1 20 A UH-1

21 3.6 1.4 22

19 3.6 1.4 20

2 20 A EF-1

EQ-06 101 50 A 3

17 3.6 1.4 18

15 3.6 1.4 16

2 20 A EF-1

13 3.6 0.1 14 1 20 A EF-2EQ-04 101 50 A 3

11 3.6 0.8 12

9 5.2 0.8 10

2 20 A EB-1

EQ-05 101 50 A 2

7 5.2 1.1 8

5 5.2 1.1 6

2 20 A ERV-1

EQ-02 100 50 A 2

3 5.2 0.7 4

EQ-01 100 50 A 1 1 3.6 0.7 2

2 20 A ACCU-1

LOAD DESCRIPTION BKR P CKT A B C CKT P BKR LOAD DESCRIPTION

BUS AMPS: 225 AMPS

MAIN DEVICE: 225 A MAIN CB SPECIAL:

MOUNTING: SURFACE NEMA 1 A.I.C. RATING: 10,000 AMPS SYMMETRICAL

LOCATION: ELEC 106 VOLTAGE: 208Y/120 V. 3 ø 4 W.

PANELBOARD: PANEL B

125/250

125/250

1. FOR 20A CIRCUIT BREAKERS PROVIDE 60A FRAME MAXIMUM OR SMALLER SIZEPER MANUFACTURER'S STANDARD PRODUCT

OFFERING.

NOTES:

EST. DEMAND CURRENT: 89 A

CONN. CURRENT: 117 A

EST. DEMAND LOAD: 74151 VA

SPEC 10400 VA 100.00% 10400 VA CONN. LOAD: 97657 VA

MTR 22734 VA 104.29% 23708 VA

LITES 4123 VA 125.00% 5154 VA

RCPT 60828 VA 58.22% 35414 VA

Other 0 VA 0.00% 0 VA

LOAD CLASSIFICATION CONNECTED DEMAND ESTIMATED PANEL TOTALS

7 60 A 1 20 A 0.4 kVA LITES 3 60 A 1 20 A 1.2 kVA LITES 2 200 A 3 110 A 94.3 kVA T1 1 60 A 1 20 A 2.1 kVA LITES

CKT FRAME POLES RATING

CONNECTED

KVA DESCRIPTION/NAMEPLATE NOTES

SECTION No. 1

BUS AMPS: 400 AMPS SPECIAL:

MAIN DEVICE: 400 A MCB A.I.C. RATING: 24,000 AMPS SYMMETRICAL

LOCATION: ELEC 106 VOLTAGE: 480Y/277 V. 3 ø 4 W.

DISTRIBUTION PANEL: MDP

NO DATE REVISION

1 07/12/2021 ADDENDUM 02

2 09/11/2023 ADDENDUM 02

2 2

Typed or Printed Name:

Date: Reg. No.:

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

I HEREBY CERTIFY that this plan, specification or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the State of Minnesota.

Signature:

AUSTEN JAMES BRYAN

09/11/2023 57136