Furniture_Item_Descriptions_-_Classroom.pdf

August 13, 2015

1 | P a g e

240 W. Bessemer St.

Alcoa, Tennessee 37701

Furniture Package Overview:

The Furniture Contractor shall provide a complete and usable furniture package, including all assembly and setup. The contractor shall include costs for any and all incidental expenses. The principal components shall be as itemized below, EQUAL items will require submission of product literature in order to make comparison of equal products to the salient characteristics listed. The contractor shall bear the burden of proof and prove to the satisfaction of the Contracting Officer that the proposed substitute is equal to the specified product.

ITEM Specification Notes:

Manufacturer Steelcase unless noted otherwise

A Stacking Chair:

Width shall be no wider than 19-3/4”W.

Depth shall be no deeper than 22-3/4”D.

Height shall be at least 33-1/4”H.

Chairs shall be armless.

SEAT

Seat width shall be at least 18-1/4”W. Functional seat depth shall be at least 17”D. Seat height from floor shall be at least 17-1/2”H. Chair shall be tested to support 300 lbs 24/7 Seat shall be made of durable contoured plastic for ease of cleaning and durability.

The seat of the chair shall be smooth with a waterfall front edge that curves away from the user’s body, allowing ample circulation to lower legs and feet.

Seat shall be one-piece construction. No under-seat liner or cover, which can come loose, shall be needed.

BACKREST

Backrest width shall be at least 18-1/4”W.

Backrest height from seat shall be at least 17-3/4”W.

Backrest shall be made of durable contoured plastic for ease of cleaning and durability.

Backrest shall have the option to be upholstered.

Chair shall have a curved backrest incorporated into the design to provide lumbar support.

Flexible backrest and seat shall be connected.

Backrest shall be one-piece construction. No liner or cover, which can come loose, shall be needed.

FRAME/LEGS

Chair frame/legs shall be constructed of carbon steel wire, at least 7/16” in diameter for strength and durability.

Steel wire frame/legs shall be finished with polished chrome for stain and corrosion resistance.

Four rigid plastic glides are standard.

2 | P a g e

Leg Finish shall be Chrome

STACKABILITY OF CHAIRS

Chairs shall be able to stack at least 35 high on the dolly for simple storage and maximum flexibility.

Chairs shall stack at least 12 high on the floor (without the dolly).

CONSTRUCTION

Wire rod frame weldment shall consist of a pair of 7/16" diameter wire frames bent in a continuous shape to form the legs and a perimeter support structure for the back and seat plastics. The RH and LH frame members shall be joined by welding two 7/16" diameter wire stretchers at the back and lower front. In addition, the two frame members shall be joined at the front by welding a 3/16" thick embossed steel stretcher and a 5/16" dia. steel wire support for the front edge of the seat. A steel tie strap spanning the "goose-neck" of the back shall be mig welded to the frame. A pair of .075" thick formed steel brackets shall be welded to the wire frame for attaching the seat plastic.

Backrest shall be .150" thick molded polypropylene with a textured face surface.

The molded contour shall include a cylindrical cavity on each side which slips over the upright back members of the wire frame. The bottom edge of the back shall be contoured to fit over the wire frame. Backrest shall be attached to the frame with a screw which enters the tie strap.

Seat shall be .150" thick molded polypropylene with a textured face surface. The front edge of the seat shall be molded to hook over the front frame wire. The side and back contours shall coincide exactly with the shape of the frame. The seat shall be attached to the frame with 6 internal tooth washers over plastic bosses.

Four self-leveling glides shall be pressed on to the bottom surface of the side supports.

Alignment Device shall be available for anchoring chairs together in a row. The device shall be constructed of flexible injection-molded polypropylene An accompanying transportation device (aka “dolly”) for the chair shall be available. This dolly shall feature four casters, two which swivel and two which do not.

SURFACE MATERIALS

Molded polypropylene plastic seat and backrest shall be Baltic Alignment device shall be molded in a black finish.

Legs to be Chrome

WARRANTY

Manufacturer shall offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

A 12 year warranty shall also apply to the following: Arm caps, foam and glides, a selection of textiles.

Product shall be guaranteed in writing to be available for a minimum of 10 years after first order entry.

Product shall ship fully assembled with an option of boxed or blanket wrapped shipment.

Select models and finishes shall be available for 12 business day delivery.

Complete warranty coverage shall be available online or upon request.

Product line shall be warranted for users up to 300 lbs. (exceeding ANSI/BIFMA X5.1, which dictates 253 lbs.)

Product line shall be warranted for 24/7 application.

Multi-use applications should not cause the warranty listed above to be pro-rated.

3 | P a g e

MATERIALS CHEMISTRY

Painted components shall be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

RECYCLED CONTENT AND RECYCLABILITY

Chairs shall be constructed of up to 24% recycled content, 17% post consumer content, 7% pre consumer content Chairs shall be up to 93% recyclable at end of life.

CERTIFICATIONS

The above requirement is covered by SCS Indoor Advantage™ Gold Certification for indoor air quality.

Gold Certification shall not apply to the tablet arm option.

(BASED UPON STEELCASE MAX STACKER II (2) 473 Series Guest Chairs)

**Photo of product is for representation only and might not reflect actual

B Stacking Chair Dolly:

Chair Dolly shall be constructed of heavy gauge die formed steel welded in an assembly which provides a cradle for chair stacking. The dolly frame shall be attached to four 5" dia. phenolic resin compound casters, two of which are fixed and two swivel. All casters shall have self-lubricating axle bearings. The surface of the dolly frame against which the chairs rest shall be covered with resilient non-slip tape Dolly shall be painted black

Dolly shall be no wider than 22”W (with or without chairs) to fit through doorways and confined storage areas.

(Based on Max Stacker II (2) Dolly 473D)

4 | P a g e

C Flip Top Tables:

All tables shall include under worksurface mounted support beam to avoid table sag overtime.

Top surfaces shall be high-pressure laminate (HPL) Top shall measure 30”D top surface

Top thickness: 1-1/8” nominal (1.140” exact).

Edges shall be 3mm thick flat PVC-free plastic.

Flip Top Surface finish is Blonde Bronze Patina Flip Top Leg Finish is Champagne Metallic Casters shall be black.

3mm thick PVC-free plastic edgeband shall be applied to the entire perimeter of the worksurface to prevent any outgassing from exposed particle board

Top core shall be constructed of at least 1-1/8” thick, M-3 grade particleboard of at least 45 lb/cu in. density.

Steel tie plates shall be available to attach tables together rigidly.

High-pressure laminate (HPL) worksurfaces shall be 1-3/16" nominal finished thickness and shall feature balanced construction to prevent bowing or warping, with laminate on the top surface and a 0.030 inch thick backer on the bottom.

The particleboard wood core shall be at least 45 lb/cu in. density. The laminate and backer shall be permanently attached and reinforced under pressure to the wood core using water-based polyvinyl acetate (PVA) adhesive.

Tops shall feature pre-drilled holes to ensure proper placement of legs and bases.

Flip-top leg shall nest for space-saving storage (for 27-3/8”H applications) Flip- top legs shall be available to allow top to rotate at least 90 degrees to facilitate nested storage. Nesting instructions shall be shown on a printed label affixed to the underside of the top.

Flip-top leg mechanism shall be spring-assisted for ease of operation and shall lock in place to prevent unintended tilting.

Flip-top legs shall be designed so as not to require plastic or metal end caps in the footspace, as these can be dislodged or damaged, even when welded, brazed or adhered in place.

Flip-top legs shall be at least 11 ga. (.118”) steel tubing. Mounting plates shall be at least 10 ga. (.139”) steel plate.

Casters shall be hard dual-wheel plastic. Casters shall be available as locking or non-locking.

5 | P a g e

Flip-top legs shall feature a pivoting bracket with a lock release mechanism, actuated by a steel cable with a molded handle which mounts to the table with screws Service parts shall be available.

Shall be field-assembled with common tools.

WARRANTY

Product line is warranted for 24/7 application.

Lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective items).

Customer shall not pay extra for non-standard product modifications (aka “specials”) made by manufacturer to meet this specification for five years after first order entry.

Product is guaranteed in writing to be available for a minimum of 5 years after first order entry.

Steel tie plates shall be used when ganging or connecting tables with levelers to keep tables together.

Multi-use applications will not cause the warranty listed above to be pro-rated.

MATERIALS CHEMISTRY

Paint shall be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components PVC-free edgebanding shall be standard on particle board components to avoid potential long-term human and environmental health dangers of PVC and to gain LEED Innovation and Design credit.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the

Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their used furniture. .

RECYCLED CONTENT AND RECYCLABILITY

Powder coat paint overspray used in the finishing process of this product shall be collected by the Manufacturer, reprocessed, and used on interior components.

Table bases and legs shall be constructed of up to 34% recycled content.; 24% post consumer content10% pre consumer content Table bases and legs shall be up to 99% recyclable at end of life.

Worksurface shall be constructed of up to 83% recycled content.

CERTIFICATIONS

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification The above requirement is covered by SCS IndoorAdvantage™ Gold Certification for indoor air quality.

Product shall be at least Level™ 1 Certified with the BIFMA e3-2008 Furniture

Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

(Based Upon STEELCASE GROUPWORK Flip Top Table TS4FL2730TC2)

6 | P a g e

D Power Module for Flip Top Tables

Box, Lid, and attachment bracket shall be steel, black, textured powder coat surface.

Shall contain two 15 amp power outlets with built-in circuit breaker

Shall also contain one additional 15- amp power outlet that shall be included on the bottom of the box to enable tables to be powered together without being hardwired Box shall be 8-3/8 “ x 4-3/4'’ in dimensions.

1 year warranty

(Based on Coalesse Interact INTSC)

E Rectangle Stationary Tables 42D x 84W

All tables shall include Reinforcing Channel Worksurfaces shall have a depth of 42” Worksurfaces shall have a width of 84”

Top Surface Finish shall be 2870 Blonde Bronze Patina HPL Finish Edge Band Finish shall be 6694 Slate Shall have Elliptical Post Legs

Elliptical post legs shall be constructed of a 16 ga. (.064”) sheet metal tube welded to a 10 ga. (.139”) worksurface mounting plate. A glide or caster shall be press fitted into the bottom of the leg.

Elliptical Post Legs shall be Champagne Metallic leg paint ainted surfaces are to have the following qualities:

7 | P a g e

Electrostatically-applied, baked-on epoxy-polyester hybrid powder coat paint for optimal corrosion, stain, abrasion and scratch resistance

Edgeband shall be a minimum of 3mm thick.

PVC-free plastic edgeband shall be permanently and securely attached to the wood core with hot melt adhesive All post legs with glides shall have at least 3/4” glide adjustment range

A field installed steel reinforcing channel shall be available for heavily loaded worksurfaces or long spans of unsupported worksurface.

PVC-free edgebanding shall be standard on particleboard components to avoid potential long-term human and environmental impacts that have been associated with the manufacture and future disposal of PVC.

Edgeband shall be a minimum of 3mm thick.

Common fasteners shall be used to assemble the desks and tables on site using common tools.

WORKSURFACE

High-pressure laminate worksurfaces shall be 1-3/16" nominal finished thickness and shall feature balanced construction to prevent bowing or warping, with 0.028” +/-.004” thick high-pressure laminate on the top surface and a 0.030” thick backer on the bottom. The wood core shall be medium density (45 lb/cu ft) commercial grade particle board as defined in AWI 200-G quality standards. The laminate and backer shall be permanently attached and reinforced under pressure to the wood core using water-based polyvinyl acetate (PVA) adhesive.

Worksurfaces greater than 72”W support 2 equal 12” dia. concentrated functional loads of 200 lbs each and a distributed load of 1.5 lbs/inch distributed about the perimeter.

WARRANTY

Manufacturer shall offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

The following lifetime warranty exceptions shall be allowed: Laminates and wood veneers shall have a minimum 12 year warranty. Paint colorfastness shall have a minimum 5 year warranty.

Complete warranty coverage is available online or upon request.

ENVIRONMENTAL FEATURES

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the

Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

RECYCLED CONTENT AND RECYCLABILITY

Desk supports shall be made up of at least 30% recycled content.

Packaging waste shall be minimized by palletizing like worksurfaces.

Packaging materials shall contain 15% to 35% recycled content.

Particleboard core shall consist of 100% recycled and recovered wood fiber.

CERTIFICATIONS

The above requirement is covered by SCS IndoorAdvantage™ Gold Certification for indoor air quality.

Product shall be at least Level® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

8 | P a g e

F Lectern Lectern shall have 3 shelves and 2 being adj.

Contemporary Style Full Height Lecterns shall be 25" wide, 22" deep, and 49-

1/2" tall

Lecterns shall have a 3/4" thick slated top in order to hold presentation materials in an easy to read position.

Lecterns shall have wire management channel to route cords and wires.

Lecterns shall be box construction with butt joints with hidden fasteners. All panels shall be 3 ply balanced construction with the medium density particle board as the core material and wood veneer on all visible faces Lectern Finish is FC/OP Graphite Walnut walnut veneer shall be available in flat cut and quarter cut

Shall be “natural” – not “composite” or “reconstituted veneer.”

Shall have a finish sheen level between 35 and 50 for open-pore and 40-55 for full-fill.

Manufacturer shall select and lay-up veneer internally; allowing each face to be specially laid up for the most pleasing aesthetic.

Manufacturer shall use at least 25% FSC cherry veneer as part of its standard purchasing practice without customized customer specification.

Shall have reduced VOC emission by using water-based adhesives and water-based finishing process on wood veneered casegoods.

WARRANTY

Manufacturer shall offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

The following lifetime warranty exceptions shall be allowed:

wood veneers shall have a minimum 12 year warranty..

Paint colorfastness shall have a minimum 5 year warranty.

Complete warranty coverage is available online or upon request.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their furniture

RECYCLED CONTENT AND RECYCLABILITY

9 | P a g e

Lectern shall be constructed of at least:

76% recycled content:

1% post consumer content 75% pre consumer content 4% recyclable at end of life.

CERTIFICATIONS

Product shall be at least Level® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

It is desirable for the product to be manufactured in a LEED certified facility.

(Based on STEELCASE Convene Lectern CWCLECF)

Q Staging

Decks are 4' x 8' (122 x 244 cm) size and 16" (41 cm) fixed height

Each deck is equipped with pneumatic springs to assist in setup and takedown, allowing one-person ease of use.

Decks shall be constructed of solid core 3 /4" (1.9 cm) plywood.

Top surfaces are black slip resistant standard surface in Black Moroccan Finish

Shall have a Step on foot-release and the pneumatic springs to allow to slowly and safely lower deck surface

Legs are one-piece 16 gauge 11 /4" (3 cm) steel tubing with a reinforcing cross brace. Locking angle-braces allow for easy set-up and sure stability.

Legs shall have an electrostatically applied black epoxy paint finish.

Frame and edging are fabricated from 16 gauge steel with a grey powder-coat painted finish.

Unit-to-unit frame clamps shall have a cam-action for easy positive locking to the frame of the adjacent unit.

Shall have one clamp per side of each stage unit that provides two points of connection when units are locked together.

Units shall be able to nest for compact storage. The first stagehand unit needs

27" (69 cm) and each additional unit only adds 12" (30 cm). When stored, units are 611 /2" (156 cm) high and 96" (244 cm) long.

10 | P a g e

Environmental attributes and LEED compliance for this product can be found at www.wengercorp.com/GREEN or by contacting your Wenger representative.

Five-year warranty Shall include TS Snap on Drape/skirt 8x 16 in Black

Shall include TS Snap on Drape/skirt 4x16 in Black (Based on Wenger Stagehand 178B515)

Option Items:

G Café/Bar Stool – OPTION ITEM #1 Stool shall be armless

Overall depth shall be 20-1/4”D.

Overall width shall be 17”W.

Overall height shall be 43-1/4”H.

Backrest height from seat is Stool: 16” Backrest shall be wood Seat height from floor shall be 30-1/4”

Stool seat depth shall be 15-7/8” Seat shall be wood Chair shall be tested to support 300 lbs Chair legs shall be constructed of monochromatic steel tubing.

Each leg shall feature a non-marring glide.

Stool frame shall include a front footrest tube and matching stretcher tube on the back, with two tubes spanning between for added rigidity.

Seat and backrest panels shall be formed 9-ply plywood or strandwood, at least 9/16” thick.

Threaded inserts shall provide metal-to-metal fastening to the frame.

The four-leg, welded tubular frame assembly shall be constructed of at least 1" diameter, 16 ga. (.059”) steel tubing used as front and rear uprights and seat sides.

Front and rear seat supports shall be at least 1/4” thick steel plate.

The armless version frame shall use a solid aluminum domed plug on top of each upright, held in place with a concealed screw.

http://www.wengercorp.com/GREEN http://www.wengercorp.com/GREEN

11 | P a g e

Electrostatically-applied powder coat type for durability.

Wood finish for seat and back and arms shall be FC/OP Graphite Walnut

WARRANTY

Molded plastic glides shall be press-fitted into the frame uprights.

The statement of line shall include visually compatible chairs and stools.

Product shall be guaranteed in writing to be available for a minimum of 5 years after first order entry.

Product shall ship fully assembled with an option of boxed or blanket wrapped shipment.

Select models and finishes shall be available for 12 business day delivery.

Manufacturer shall offer a lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.)

The following lifetime warranty exceptions shall be allowed:

Arm caps, foam and glides shall have a minimum 12 year warranty.

A selection of textiles shall have a minimum 12 year warranty.

Complete warranty coverage is available online or upon request.

Product line shall be warranted for users up to 300 lbs.

Product line shall be warranted for 24/7 application.

Multi-use applications should not cause the warranty listed above to be pro-rated.

TESTING

Chair shall be tested to support 300 lbs.

Chair shall meet or exceed all ANSI/BIFMA X5.1 American National Standard for Office Furnishings-General Purpose Office Chairs-Tests.

Testing of fabric abrasion, stain resistance and durability shall be documented and available upon request

ENVIRONMENTAL FEATURES

Painted components shall be coated with powder coat paint, which results in minimal waste, consumes less energy and requires no solvents, compared to traditional wet paint processes.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

RECYCLED CONTENT AND RECYCLABILITY

Chairs shall be constructed of up to 18% recycled content

10% post consumer content 8% pre consumer content Chair shall be up to 58% recyclable at end of life.

CERTIFICATIONS

The above requirement is covered by SCS IndoorAdvantage™ Certification for indoor air quality.

(Based on STEELCASE Deck Stool Decks1)

12 | P a g e

H Café Height Round Table – OPTION ITEM #1

Table Top shall be 42” dia, 1- 3/8” thick HPL

Edge Finish shall be 6527 Merle Top Finish shall be 2871 Blackened Bronze Ptn

Round Table base shall be 28’’ dia

Table base shall be Champagne Metallic Finish Edges shall be 3mm thick flat PVC-free plastic.

Top core shall be constructed of at least 1-1/8” thick, M-3 grade particleboard of at least 45 lb/cu in. density.

Steel tie plates shall be available to attach tables together rigidly.

Top surfaces shall be high-pressure laminate (HPL) Café-Height (standing height) Round Table Base (for 41”H applications on square, round, or conference tops) Legs shall feature non-marring plastic levelers Construction Methods, Materials Utilized, and Associated Benefits

High-pressure laminate (HPL) worksurfaces shall be 1-3/16" nominal finished thickness and shall feature balanced construction to prevent bowing or warping, with laminate on the top surface and a 0.030 inch thick backer on the bottom.

The particleboard wood core shall be at least 45 lb/cu in. density. The laminate and backer shall be permanently attached and reinforced under pressure to the wood core using water-based polyvinyl acetate (PVA) adhesive.

3mm thick PVC-free plastic edgeband shall be applied to the entire perimeter of the worksurface to prevent any outgassing from exposed particle board.

Levelers shall be steel construction attached to a nylon glide base.

ROUND BASES

Bases shall feature sturdy welded steel construction for durability.

Column shall be steel tubing, at least .065” thick, with two outside diameters available, 2-3/4” or 5”.

Column and 1/4” thick steel table mounting bracket shall be welded together.

Column shall have an internal base mounting bracket with threaded holes welded at the opposite end so the round base plate can be attached to the column weldment with screws on site.

MISCELLANEOUS

Service parts shall be available.

Shall be field-assembled with common tools Customer testimonials/endorsements shall be made available upon request.

13 | P a g e

Customer shall not pay extra for non-standard product modifications (aka “specials”) made by manufacturer to meet this specification for five years after first order entry.

Product is guaranteed in writing to be available for a minimum of 5 years after first order entry.

Steel tie plates shall be used when ganging or connecting tables with levelers to keep tables together.

WARRANTY

Lifetime warranty that product shall be free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective items).

Exceptions: Laminate is warranted for 10 years.

Product line is warranted for 24/7 application.

Multi-use applications will not cause the warranty listed above to be pro-rated.

TESTING

Worksurfaces less than 45”W support a 12” dia. concentrated functional load of 200 lbs.

Worksurfaces 45”W to 72”W support a 12” dia. concentrated functional load of 200 lbs, and a distributed load of 1.5 lbs/inch distributed about the perimeter.

Particleboard shall meet requirements as defined by ANSI A208.1 and ASTM D 1037.

MATERIALS CHEMISTRY

Paint shall be VOC-free powder coat type. Powder coat paint overspray is to be collected, reprocessed, and used on interior components

PVC-free edgebanding shall be standard on particle board components to avoid potential long-term human and environmental health dangers of PVC and to gain LEED Innovation and Design credit.

LIFE CYCLE ASSESSMENT

In lieu of disposing furniture in a landfill at the end of its useful life, the Manufacturer shall provide opportunities for the Customer to recycle, resell or refurbish their used furniture.

Product shall have certification of environmentally-intelligent product design from a third party, such as MBDC Cradle-to-Cradle™ Certification.

RECYCLED CONTENT AND RECYCLABILITY

Powder coat paint overspray used in the finishing process of this product shall be collected by the Manufacturer, reprocessed, and used on interior components.

Table bases and legs shall be constructed of up to 34% recycled content.

24% post consumer content 10% pre consumer content Table bases and legs shall be up to 99% recyclable at end of life.

Worksurface shall be constructed of up to 83% recycled content.

CERTIFICATIONS

The above requirement is covered by SCS IndoorAdvantage™ Gold Certification for indoor air quality.

Product shall be at least Level™ 1 Certified with the BIFMA e3-2008 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

(Based upon STEELCASE Group Work Café’ Height Table & Base

TS4THDR42T)

14 | P a g e