184_ISRG_Statement_of_Objectives.pdf

184ISRG Ops Floor Workspace Characteristics/Specifications

{Overview}

The following characteristics/specifications for operational workspaces are required to meet the technical needs of our 24/7 Distributed Ground Station- Kansas (DGS-KS) federal mission. Attached with this form/packet is the operations floor configuration with the workspaces needed for the current set up. Vendors should note the following requirements:

Vendor storage/assembly will take place in a location other than Bldg 37 The government will transport all packaged freight from the receiving dock to the assembly/inspection location at which the contractor will take responsibility of the freight. Assembly, inspection, and operational checks will occur in Hanger 50

Assembled product will be transported from build/storage location by government personnel to Bldg 37.

{Key Salient Characteristics}

1) The proposed workspaces must be of ergonomic design and intended for 24/7 use.

2) The following specifications are common to all sizes of workstations:

a) Ergonomic height adjustment with electronic control

b) The work surface must support a minimum of 300lb distributed load per station

c) Provide support for 24” monitors @ 15lbs each

d) Monitor mount must have 2 axis adjustability (in/out and side-to-side) with tilt functionality

e) Design must capable of adding or removing additional monitors as mission requirements dictate

f) Force limiters for both up and down movement to avoid damage to equipment

g) “open” design for CPU cooling…no doors or fans required. Also, no rack mount system required

h) Integrated cable management 8ea DVI cables sized for integrated cable management 8ea USB-A to USB-B cables sized for integrated cable management

i) Desk power will be a NEMA 5-15 or 5-20 electrical connection with a minimum 8’ cord

j) Overall depth of desk must not exceed 43”

k) Color will be a light slate gray or similar neutral gray-type color

3) General Vendor Requirements

a) Detailed warranty information must be provided as part of the vendor proposal. Minimum 1-yr warranty required.

b) Detailed drawings with dimensions of the desk(s) with color options required

c) Vendor must dispose of all packing material and refuse generated from furniture delivery, unpacking, and assembly

4) Specific Details for different sized Workstations

• Size specific:

o 6ft desk Support for 8 monitors in a double-stack configuration Support for 4 CPU towers measuring H20”xW10”xD23”

Integrated electrical distribution with at least 18 outlets @ 120V with input power cord to be at least 8’ in length o 5ft desk Support for 6 monitors in a double-stack configuration Support for 4 CPU towers measuring H20”xW10”xD23”

Integrated electrical distribution with at least 16 outlets @ 120V with input power cord to be at least 8’ in length o 4ft desk Support for 4 monitors in a double-stack configuration

Support for 2 CPU towers measuring H20”xW10”xD23” Integrated electrical distribution with at least 14 outlets @

120V with input power cord to be at least 8’ in length