DOR_Turnstile_r1.pdf

Description of Requirement Turnstiles

1. Product Description

CLIN 0001 (Qty 2) Entry-Level stainless steel standard passage width turnstiles. This turnstile needs to be a representation of what is commonly found within facilities where security and access control requirements are in place. This turnstile must be a full height turnstile capable of controlling pedestrian traffic. This turnstile must be manual only. In other words, no electronics are needed and this turnstile must be able to function as designed while also manually locking with a key. Locking keys must be provided. This stainless steel turnstile must have a standard passage width. An example of this turnstile is a Hayward HT430. Each turnstile must contain all required hardware which is commonly used for mounting. Each turnstile will be mounted to a concrete slab designed specifically for the turnstile. The contractor must provide the minimum concrete requirements but the concrete slabs will be provided by other personnel. Note that the turnstile will be mounted to a concrete slab that will be moved in and out of a warehouse. In other words, the turnstile/concrete slab combination will be moved by forklift into a warehouse once proper installation is complete. .*Alternative mobile platforms may be proposed* An installation supervisor is required to supervise turnstile assembly and ensure proper turnstile operation.

Each turnstile must be delivered to a job site located in Shepherdsville, KY which is just south of Louisville, KY.

CLIN 0002 (Qty 5) Entry-Level galvanized standard passage width turnstiles. This turnstile needs to be a representation of what is commonly found within facilities where security and access control requirements are in place. This turnstile must be a full height turnstile capable of controlling pedestrian traffic. This turnstile must be manual only. In other words, no electronics are needed and this turnstile must be able to function as designed while also manually locking with a key. Locking keys must be provided. This galvanized turnstile must have a standard passage width. An example of this turnstile is a Hayward HT431. Each turnstile must contain all required hardware which is commonly used for mounting. Each turnstile will be mounted to a concrete slab designed specifically for the turnstile. The contractor must provide the minimum concrete requirements but the concrete slabs will be provided by other personnel. Note that the turnstile will be mounted to a concrete slab that will be moved in and out of a warehouse. In other words, the turnstile/concrete slab combination will be moved by forklift into a warehouse once proper installation is complete.

.*Alternative mobile platforms may be proposed* An installation supervisor is required to supervise turnstile assembly and ensure proper turnstile operation. Each turnstile must be delivered to a job site located in Shepherdsville, KY which is just south of Louisville, KY.

CLIN 0003 (Qty 5) Entry-Level galvanized wide passage width turnstiles. This turnstile needs to be a representation of what is commonly found within facilities where security and access control requirements are in place. This turnstile must be a full height turnstile capable of controlling pedestrian traffic. This turnstile must be manual only. In other words, no electronics are needed and this turnstile must be able to function as designed while also manually locking with a key. Locking keys must be provided. This galvanized turnstile must have a wide passage width. An example of this turnstile is a Hayward HT439. Each turnstile must contain all required hardware which is commonly used for mounting. Each turnstile will be mounted to a concrete slab designed specifically for the turnstile. The contractor must provide the minimum concrete requirements but the concrete slabs will be provided by other personnel. Note that the turnstile will be mounted to a concrete slab that will be moved in and out of a warehouse. In other words, the turnstile/concrete slab combination will be moved by forklift into a warehouse once proper installation is complete. .*Alternative mobile platforms may be proposed* An installation supervisor is required to supervise turnstile assembly and ensure proper turnstile operation. Each turnstile must be delivered to a job site located in Shepherdsville, KY which is just south of Louisville, KY.

CLIN 0004 (Qty 3) Entry-Level galvanized extra wide passage width turnstiles. This turnstile access control requirements are in place. This turnstile must be a full height turnstile capable of controlling pedestrian traffic. This turnstile must be manual only. In other words, no electronics are needed and this turnstile must be able to function as designed while also manually locking with a key. Locking keys must be provided. This galvanized turnstile must have an extra wide passage width. An example of this turnstile is a Hayward HT448. Each turnstile must contain all required hardware which is commonly used for mounting. Each turnstile will be mounted to a concrete slab designed specifically for the turnstile. The contractor must provide the minimum concrete requirements but the concrete slabs will be provided by other personnel. Note that the turnstile will be mounted to a concrete slab that will be moved in and out of a warehouse. In other words, the turnstile/concrete slab combination will be moved by forklift into a warehouse once proper installation is complete.

.*Alternative mobile platforms may be proposed* An installation supervisor is required to supervise turnstile assembly and ensure proper turnstile operation. Each turnstile must be delivered to a job site located in Shepherdsville, KY which is just south of Louisville, KY.

CLIN 0005 (Qty 2) Premium aluminum standard passage width turnstiles. This turnstile access control requirements are in place. This turnstile must be a full height turnstile capable of controlling pedestrian traffic. This turnstile must be manual only. In other words, no electronics are needed and this turnstile must be able to function as designed while also manually locking with a key. Locking keys must be provided. This aluminum turnstile must have a standard passage width. The frame and arms must be aluminum. The glazing must be a high impact durable Lexan. An example of this turnstile is a Hayward HT80. Each turnstile must contain all required hardware which is commonly used for mounting. Each turnstile will be mounted to a concrete slab designed specifically for the turnstile. The contractor must provide the minimum concrete requirements but the concrete slabs will be provided by other personnel. Note that the turnstile will be mounted to a concrete slab that will be moved in and out of a warehouse. In other words, the turnstile/concrete slab combination will be moved by forklift into a warehouse once proper installation is complete. .*Alternative mobile platforms may be proposed* An installation supervisor is required to supervise turnstile assembly and ensure proper turnstile operation. Each turnstile must be delivered to a job site located in Shepherdsville, KY which is just south of Louisville, KY.

CLIN 0006 Installation. The contractor must provide an installation supervisor to oversee a crew/team of others. The time required will be the length of time needed to properly install 17-20 turnstiles such as those listed for line items 1-5. This person must be capable of passing a background check allowing entry onto a military installation. The installation location will be at a secure military range located near Shepherdsville, KY which is just south of Louisville, KY. Concrete slabs for each turnstile will be in place prior to the installation process. Each turnstile must function as designed allowing personnel access but must be able to be manually locked allowing no entry as if the turnstile was located at a secure facility. A forklift will be provided by others to assist with the install and movement of the turnstile/concrete combinations, however, the contractor must provide all hardware which is commonly used during turnstile installation. The contractor must provide a list of all required tools which will be needed for installation prior to the installation process. This will ensure that the main assembly/installation team is properly prepared prior to turnstile assembly and mounting.

2. Additional information for CLINs 0001-0005.

• All turnstiles must be manual only. Electronics are not needed. Two sets of keys per turnstile is sufficient if specific to turnstile model. It is satisfactory if multiple models are keyed the same so the total number of keys can be reduced.

• The contractor must provide the minimum concrete requirements for a turnstile/concrete slab combination that will be moved in and out of a warehouse.

The concrete slab will be provided by others. .*Alternative mobile platforms may be proposed* - If an alternative platform is proposed, the offeror shall provide technical information describing the alternative.

3. Pricing

• Per unit and total CLIN pricing shall be provided for each turnstile described above (CLINs 0001-0005). The government reserves the right to purchase some or all of the quoted units.

• A firm fixed price shall be given for installation (CLIN 0006) to include transportation and lodging for supervisor

CLIN Qty Per Unit Price Total 0001 2 0002 5 0003 5 0004 3 0005 2

0006 NA NA

TOTAL NA NA

4. Delivery

• Delivery and installation of all turnstiles will be at a military facility located near Shepherdsville, KY no later than 10 weeks after award.