Amendment_0003_-_KC46_Fuselage_Trainer_-_Specs.pdf

KC46A Beddown Fusel age Tr ai ner , Renovat e B. 3209 JBMDLPTFL163006 XXX Submi ssi on

SECTI ON 26 56 00

EXTERI OR LI GHTI NG ( LED)

05/13

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN SOCI ETY OF HEATI NG, REFRI GERATI NG AND AI R- CONDI TI ONI NG

ENGI NEERS ( ASHRAE)

ASHRAE 90. 1 - I P ( 2013) Ener gy St andar d f or Bui l di ngs Except Low- Ri se Resi dent i al Bui l di ngs

ASTM I NTERNATI ONAL ( ASTM)

ASTM B117 ( 2016) St andar d Pr act i ce f or Oper at i ng Sal t Spr ay ( Fog) Appar at us

CALI FORNI A ENERGY COMMI SSI ON ( CEC)

CEC Ti t l e 24 ( 2016) Cal i f or ni a' s Ener gy Ef f i c i ency St andar ds f or Resi dent i al and Nonr esi dent i al Bui l di ngs

I LLUMI NATI NG ENGI NEERI NG SOCI ETY OF NORTH AMERI CA ( I ES)

I ES HB- 10 ( 2011; Er r at a 2015) I ES Li ght i ng Handbook

I ES LM- 79 ( 2008) El ect r i cal and Phot omet r i c Measur ement s of Sol i d- St at e Li ght i ng Products

I ES LM- 80 ( 2015) Measur i ng Lumen Mai nt enance of LED Li ght Sour ces

I ES RP- 16 ( 2010; Addendum A 2008; Addenda B & C 2009) Nomencl at ur e and Def i ni t i ons f or I l l umi nat i ng Engi neer i ng

I ES TM- 15 ( 2011) Lumi nai r e Cl assi f i cat i on Syst em f or Out door Lumi nai r es

I ES TM- 21 ( 2011; Addendum B 2015) Pr oj ect i ng Long Ter m Lumen Mai nt enance of LED Li ght Sour ces

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 100 ( 2000; Ar chi ved) The Aut hor i t at i ve Di ct i onar y of I EEE St andar ds Ter ms

I EEE C2 ( 2017) Nat i onal El ect r i cal Saf et y Code

SECTI ON 26 56 00 Page 1

09/21/18 2: 14 PM

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

ANSI C136. 13 ( 2004; R 2009) Amer i can Nat i onal St andar d f or Roadway Li ght i ng Equi pment , Met al Br acket s f or Wood Pol es

ANSI C136. 21 ( 2004; R 2009) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Ver t i cal Tenons Used wi t h Post - Top- Mount ed Luminaires

ANSI C136. 3 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment Lumi nai r e At t achment s

NEMA 250 ( 2014) Encl osur es f or El ect r i cal Equi pment ( 1000 Vol t s Maxi mum)

NEMA C136. 10 ( 2010) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Locki ng- Type Phot ocont r ol Devi ces and Mat i ng Recept acl es- - Physi cal and El ect r i cal I nt er changeabi l i t y and Testing

NEMA C136. 31 ( 2010) Amer i can Nat i onal f or Roadway and Ar ea Li ght i ng Equi pment - Lumi nai r e Vibration

NEMA C82. 77 ( 2002) Har moni c Emi ssi on Li mi t s - Rel at ed Power Qual i t y Requi r ement s f or Li ght i ng Equipment

NEMA I CS 2 ( 2000; R 2005; Er r at a 2008) St andar d f or Cont r ol l er s, Cont act or s, and Over l oad Rel ays Rat ed 600 V

NEMA I EC 60529 ( 2004) Degr ees of Pr ot ect i on Pr ovi ded by Encl osur es ( I P Code)

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2017) Nat i onal El ect r i cal Code

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

47 CFR 15 Radi o Fr equency Devi ces

UNDERWRI TERS LABORATORI ES ( UL)

UL 1310 ( 2011; Repr i nt Oct 2013) UL St andar d f or Saf et y Cl ass 2 Power Uni t s

UL 1598 ( 2008; Repr i nt Oct 2012) Lumi nai r es

UL 773 ( 2016; Repr i nt Nov 2017) St andar d f or Pl ug- I n, Locki ng Type Phot ocont r ol s f or Use wi t h Ar ea Li ght i ng

SECTI ON 26 56 00 Page 2

09/21/18 2: 14 PM

e3endtk9 Highlight

UL 773A ( 2016) St andar d f or Noni ndust r i al Phot oel ect r i c Swi t ches f or Li ght i ng Cont r ol

UL 8750 ( 2015; Repr i nt Aug 2017) UL St andar d f or Saf et y Li ght Emi t t i ng Di ode ( LED) Equi pment f or Use i n Li ght i ng Pr oduct s

UL 916 ( 2007; Repr i nt Dec 2013) St andar d f or Ener gy Management Equi pment

1. 2 DEFINITIONS

a. Unl ess ot her wi se speci f i ed or i ndi cat ed, el ect r i cal and el ect r oni cs t er ms used i n t hese speci f i cat i ons, and on t he dr awi ngs shal l be as def i ned i n I EEE 100 and I ES RP- 16.

b. For HI D, f l uor escent , and i nduct i on l umi nai r e l i ght sour ces, " Aver age Rat ed Li f e" i s t he t i me af t er whi ch 50 per cent of a l ar ge gr oup of l i ght sour ces wi l l have f ai l ed and 50 per cent wi l l have sur vi ved under nor mal oper at i ng condi t i ons.

c. For LED l umi nai r e l i ght sour ces, " Usef ul Li f e" i s t he oper at i ng hour s bef or e r eachi ng 70 per cent of t he i ni t i al r at ed l umen out put ( L70) wi t h no cat ast r ophi c f ai l ur es under nor mal oper at i ng condi t i ons. Thi s i s al so known as 70 per cent " Rat ed Lumen Mai nt enance Li f e" as def i ned in I ES LM- 80.

d. The " Gr oundl i ne Sect i on" of wood pol es i s t hat por t i on of t he pol e bet ween one f oot above, and 2 f eet bel ow t he gr oundl i ne.

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval , f or i nf or mat i on onl y, or as ot her wi se desi gnat ed. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . The f ol l owi ng shal l be submi t t ed i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Phot omet r i c Pl an; G, RO

LED Lumi nai r e War r ant y; G, RO

SD- 02 Shop Dr awi ngs

Lumi nai r e dr awi ngs; G, RO

SD- 03 Pr oduct Dat a

LED Lumi nai r es; G, RO

Lumi nai r e Li ght Sour ces; G, RO

Lumi nai r e Bal l ast s, Gener at or s and Power Suppl y Uni t s ( Dr i ver s) ;

G, RO

SECTI ON 26 56 00 Page 3

Li ght i ng cont act or ; G, RO

Ti me swi t ch; G, RO

Li ght i ng Cont r ol Rel ay Panel ; G, RO

Bi - l evel HI D Cont r ol l er ; G, RO

Phot ocel l ; G, RO

BRACKETS; G, RO

SD- 05 Desi gn Dat a

Desi gn Dat a f or l umi nai r es; G, RO

SD- 06 Test Repor t s

LED Lumi nai r e - I ES LM- 79 Test Repor t ; G, RO

LED Li ght Sour ce - I ES LM- 80 Test Repor t ; G, RO

Pol e, EPA, and vi br at i on damper cal cul at i ons; G, RO oper at i ng t est

Submi t oper at i ng t est r esul t s as st at ed i n par agr aph ent i t l ed " Fi el d Qual i t y Cont r ol . "

Funct i onal Per f or mance Test i ng ( FPTs) For ms; G, DO

SD- 07 Cer t i f i cat es

Lumi nai r e Usef ul Li f e Cer t i f i cat e; G, RO

Submi t cer t i f i cat i on f r om t he manuf act ur er i ndi cat i ng t he expect ed usef ul l i f e of t he l umi nai r es pr ovi ded. The usef ul l i f e shal l be di r ect l y cor r el at ed f r om t he I ES LM- 80 t est dat a usi ng pr ocedur es out l i ned i n I ES TM- 21. Ther mal pr oper t i es of t he speci f i c l umi nai r e and l ocal ambi ent oper at i ng t emper at ur e and condi t i ons shal l be t aken i nt o consi der at i on.

SD- 10 Oper at i on and Mai nt enance Dat a

El ect r oni c LED Dr i ver War r ant y

Submi t document at i on t hat i ncl udes cont act i nf or mat i on, summar y of pr ocedur es, and t he l i mi t at i ons and condi t i ons appl i cabl e t o t he pr oj ect . I ndi cat e manuf act ur er ' s commi t ment t o r ecl ai m mat er i al s f or r ecycl i ng and/ or r euse.

Oper at i onal Ser vi ce; G, RO

SECTI ON 26 56 00 Page 4

09/21/18 2: 14 PM

e3endtk9 Highlight e3endtk9 Highlight

1. 4 QUALI TY ASSURANCE

1. 4. 1 Dr awi ng Requi r ement s

1. 4. 1. 1 Lumi nai r e Dr awi ngs

I ncl ude di mensi ons, ef f ect i ve pr oj ect ed ar ea ( EPA) , accessor i es, and i nst al l at i on and const r uct i on det ai l s. Phot omet r i c dat a, i ncl udi ng zonal l umen dat a, aver age and mi ni mum r at i o, ai mi ng di agr am, and comput er i zed candl epower di st r i but i on dat a shal l accompany shop dr awi ngs.

1. 4. 2 Phot omet r i c Pl an

For LED l umi nai r es, i ncl ude comput er - gener at ed phot omet r i c anal ysi s of t he " desi gned t o" val ues f or t he " end of usef ul l i f e" of t he l umi nai r e i nst al l at i on usi ng a l i ght l oss f act or of 0. 7. For LED and al l ot her t ypes of l umi nai r es, t he submi t t al shal l i ncl ude t he f ol l owi ng:

Hor i zont al i l l umi nance measur ement s at f i ni shed gr ade, t aken at a maxi mum of ever y 10 f eet .

Ver t i cal i l l umi nance measur ement s at 5 f eet above f i ni shed gr ade.

Mi ni mum and maxi mum f oot candl e l evel s.

Aver age mai nt ai ned f oot candl e l evel .

Maxi mum t o mi ni mum r at i o f or hor i zont al i l l umi nance onl y.

1. 4. 3 Desi gn Dat a f or Lumi nai r es

a. Pr ovi de di st r i but i on dat a accor di ng t o I ES cl assi f i cat i on t ype as def i ned i n I ES HB- 10.

b. Shi el di ng as def i ned by I ES RP- 8 or B. U. G. r at i ng f or t he i nst al l ed posi t i on as def i ned by I ES TM- 15.

c. Pr ovi de saf et y cer t i f i cat i on and f i l e number f or t he l umi nai r e f ami l y. I ncl ude l i s t i ng, l abel i ng and i dent i f i cat i on per NFPA 70 ( NEC) . Appl i cabl e t est i ng bodi es ar e det er mi ned by t he US Occupat i onal Saf et y Heal t h Admi ni st r at i on ( OSHA) as Nat i onal l y Recogni zed Test i ng Labor at or i es ( NRTL) and i ncl ude: CSA ( Canadi an St andar ds Associ at i on) , ETL ( Edi son Test i ng Labor at or y) , and UL ( Under wr i t er s Labor at or i es) .

d. Pr ovi de l ong t er m l umen mai nt enance pr oj ect i ons f or each LED l umi nai r e i n accor dance wi t h I ES TM- 21. Dat a used f or pr oj ect i ons shal l be obt ai ned f r om t est i ng i n accor dance wi t h I ES LM- 80.

e. Pr ovi de wi nd l oadi ng cal cul at i ons f or l umi nai r es mount ed on pol es.

Wei ght and ef f ect i ve pr oj ect ed ar ea ( EPA) of l umi nai r es and mount i ng br acket s shal l not exceed maxi mum r at i ng of pol e as i nst al l ed i n par t i cul ar wi nd zone ar ea.

1. 4. 4 LED Lumi nai r e - I ES LM- 79 Test Repor t

Submi t t est r epor t on manuf act ur er ' s st andar d pr oduct i on model l umi nai r e.

Submi t t al shal l i ncl ude al l phot omet r i c and el ect r i cal measur ement s, as wel l as al l ot her per t i nent dat a out l i ned under " 14. 0 Test Repor t " i n

SECTI ON 26 56 00 Page 5

I ES LM- 79.

1. 4. 5 LED Li ght Sour ce - I ES LM- 80 Test Repor t

Submi t r epor t on manuf act ur er ' s st andar d pr oduct i on LED package, ar r ay, or modul e. Submi t t al shal l i ncl ude:

a. Test i ng agency, r epor t number , dat e, t ype of equi pment , and LED l i ght sour ce bei ng t est ed.

b. Al l dat a r equi r ed by I ES LM- 80.

1. 4. 5. 1 Test Labor at or i es

Test l abor at or i es f or t he I ES LM- 79 and I ES LM- 80 t est r epor t s shal l be one of t he f ol l owi ng:

a. Nat i onal Vol unt ar y Labor at or y Accr edi t at i on Pr ogr am ( NVLAP) accr edi t ed f or sol i d- st at e l i ght i ng t est i ng as par t of t he Ener gy- Ef f i c i ent Li ght i ng Pr oduct s l abor at or y accr edi t at i on pr ogr am.

b. One of t he qual i f i ed l abs l i s t ed on t he Depar t ment of Ener gy - Ener gy Ef f i c i ency & Renewabl e Ener gy, Sol i d- St at e Li ght i ng web si t e.

c. A manuf act ur er ' s i n- house l ab t hat meet s t he f ol l owi ng cr i t er i a:

1. Manuf act ur er has been r egul ar l y engaged i n t he desi gn and pr oduct i on of hi gh i nt ensi t y di schar ge r oadway and ar ea l umi nai r es and t he manuf act ur er ' s l ab has been successf ul l y cer t i f y i ng t hese f i xt ur es f or a mi ni mum of 15 year s.

2. Annual equi pment cal i br at i on i ncl udi ng phot omet er cal i br at i on i n accor dance wi t h Nat i onal I nst i t ut e of St andar ds and Technol ogy.

1. 4. 6 Regul at or y Requi r ement s

I n each of t he publ i cat i ons r ef er r ed t o her ei n, consi der t he advi sor y pr ovi s i ons t o be mandat or y, as t hough t he wor d, " shal l " had been subst i t ut ed f or " shoul d" wher ever i t appear s. I nt er pr et r ef er ences i n t hese publ i cat i ons t o t he " aut hor i t y havi ng j ur i sdi ct i on, " or wor ds of s i mi l ar meani ng, t o mean t he Cont r act i ng Of f i cer . Equi pment , mat er i al s, i nst al l at i on, and wor kmanshi p shal l be i n accor dance wi t h t he mandat or y and advi sor y pr ovi s i ons of NFPA 70 unl ess mor e st r i ngent r equi r ement s ar e speci f i ed or i ndi cat ed.

1. 4. 7 St andar d Pr oduct s

Pr ovi de mat er i al s and equi pment t hat ar e pr oduct s of manuf act ur er s r egul ar l y engaged i n t he pr oduct i on of such pr oduct s whi ch ar e of equal mat er i al , desi gn and wor kmanshi p. Pr oduct s shal l have been i n sat i sf act or y commer ci al or i ndust r i al use f or 2 year s pr i or t o bi d openi ng. The 2- year per i od shal l i ncl ude appl i cat i ons of equi pment and mat er i al s under s i mi l ar c i r cumst ances and of s i mi l ar s i ze. The pr oduct shal l have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 2- year per i od. Wher e t wo or mor e i t ems of t he same cl ass of equi pment ar e r equi r ed, t hese i t ems shal l be pr oduct s of a s i ngl e manuf act ur er ; however , t he component par t s of t he i t em need not be t he pr oduct s of t he same manuf act ur er unl ess st at ed i n t hi s sect i on.

SECTI ON 26 56 00 Page 6

1. 4. 7. 1 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a 2- year f i el d ser vi ce r ecor d wi l l be accept abl e i f t he manuf act ur er has been r egul ar l y engaged i n t he desi gn and pr oduct i on of hi gh i nt ensi t y di schar ge r oadway and ar ea l umi nai r es f or a mi ni mum of 15 year s. Pr oduct s shal l have been i n sat i sf act or y commer ci al or i ndust r i al use f or 15 year s pr i or t o bi d openi ng. The pr oduct shal l have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he 15- year per i od.

1. 4. 7. 2 Mat er i al and Equi pment Manuf act ur i ng Dat e

Pr oduct s manuf act ur ed mor e t han 1 year pr i or t o dat e of del i ver y t o s i t e shal l not be used, unl ess speci f i ed ot her wi se.

1. 5 DELI VERY, STORAGE, AND HANDLI NG OF POLES

1. 5. 1 Al umi num or St eel Pol es, i f appl i cabl e

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east one f oot above gr ound l evel and gr owi ng veget at i on. Do not r emove f act or y- appl i ed pol e wr appi ngs unt i l j ust bef or e i nst al l i ng pol e.

1. 5 WARRANTY

The equi pment i t ems shal l be suppor t ed by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

1. 5. 1 LED Lumi nai r e War r ant y

Pr ovi de Lumi nai r e Usef ul Li f e Cer t i f i cat e.

The equi pment i t ems shal l be suppor t ed by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

a. Pr ovi de a wr i t t en f i ve year on- si t e r epl acement war r ant y f or mat er i al , f i x t ur e f i ni sh, and wor kmanshi p. On- si t e r epl acement i ncl udes t r anspor t at i on, r emoval , and i nst al l at i on of new pr oduct s.

1. Fi ni sh war r ant y shal l i ncl ude war r ant y agai nst f ai l ur e and agai nst subst ant i al det er i or at i on such as bl i st er i ng, cr acki ng, peel i ng, chal k i ng, or f adi ng.

2. Mat er i al war r ant y shal l i ncl ude:

( a) Al l power suppl y uni t s ( LED dr i ver s) .

( b) Repl acement when mor e t han 10 per cent of LED sour ces i n any l i ght bar or subassembl y( s) ar e def ect i ve or non- st ar t i ng.

b. War r ant y per i od must begi n on dat e of benef i c i al occupancy or const r uct i on compl et i on dat e accept ance by t he Cont r act i ng Of f i cer .

Cont r act or shal l pr ovi de t he Cont r act i ng Of f i cer s i gned war r ant y cer t i f i cat es pr i or t o f i nal payment .

SECTI ON 26 56 00 Page 7

09/21/18 2: 14 PM

e3endtk9 Highlight

1. 5. 2 El ect r oni c LED Dr i ver War r ant y

Fur ni sh t he el ect r oni c LED dr i ver manuf act ur er ' s war r ant y. The war r ant y per i od shal l not be l ess t han f i ve ( 5) year s f r om t he dat e of benef i c i al occupancy or const r uct i on compl et i on dat e. The war r ant y shal l st at e t hat t he mal f unct i oni ng bal l ast shal l be exchanged by t he manuf act ur er and pr ompt l y shi pped t o t he usi ng Gover nment f aci l i t y . The r epl acement bal l ast shal l be i dent i cal t o, or an i mpr ovement upon, t he or i gi nal desi gn of t he LED dr i ver .

1. 6 OPERATI ONAL SERVI CE

Coor di nat e wi t h manuf act ur er f or mai nt enance agr eement . Col l ect i nf or mat i on f r om t he manuf act ur er about mai nt enance agr eement opt i ons, and submi t t o Cont r act i ng Of f i cer . Ser vi ces shal l r ecl ai m mat er i al s f or r ecycl i ng and/ or r euse. Ser vi ces shal l not deposi t mat er i al s i n l andf i l l s or bur n r ecl ai med mat er i al s. I ndi cat e pr ocedur es f or compl i ance wi t h r egul at i ons gover ni ng di sposal of mer cur y. When such a ser vi ce i s not avai l abl e, l ocal r ecycl er s shal l be sought af t er t o r ecl ai m t he mat er i al s.

PART 2 PRODUCTS

2. 1 LED LUMI NAI RES

UL 1598, NEMA C82. 77 and UL 8750. Pr ovi de l umi nai r es as i ndi cat ed i n l umi nai r e schedul e and det ai l s on pr oj ect pl ans. Pr ovi de l umi nai r es compl et e wi t h l i ght sour ces of quant i t y, t ype, and wat t age i ndi cat ed. Al l l umi nai r es of t he same t ype shal l be pr ovi ded by t he same manuf act ur er .

2. 1. 1 Gener al Requi r ement s

a. LED l umi nai r e housi ngs shal l be di e cast or ext r uded al umi num.

Housi ngs f or l umi nai r es ot her t han LED shal l be di e cast , ext r uded, or f abr i cat ed al umi num. Fabr i cat ed al umi num housi ngs shal l have al l seams and cor ner s i nt er nal l y wel ded t o r esi st weat her i ng, moi st ur e and dust.

b. LED l umi nai r es shal l be r at ed f or oper at i on wi t hi n an ambi ent t emper at ur e r ange of mi nus 40 degr ees F t o 104 degr ees F.

c. Lumi nai r es shal l be UL l i s t ed f or wet l ocat i ons per UL 1598. Opt i cal compar t ment f or LED l umi nai r es shal l be seal ed and r at ed a mi ni mum of I P65 per NEMA I EC 60529.

d. LED l umi nai r es shal l pr oduce a mi ni mum ef f i cacy as shown i n t he f ol l owi ng t abl e and as i ndi cat ed on t he l i ght i ng f i x t ur e det ai l s ( whi chever r equi r ement i s mor e st r i ngent shal l gover n) , t est ed per I ES LM- 79. Theor et i cal model s of i ni t i al r aw LED l umens per wat t ar e not accept abl e.

Application Lumi nai r e Ef f i cacy i n Lumens per Wat t

Ext er i or Wal l - Mount ed Ar ea Lumi nai r es 100

e. Lumi nai r es shal l have I ES di st r i but i on and NEMA f i el d angl e

SECTI ON 26 56 00 Page 8 cl assi f i cat i ons as i ndi cat ed i n l umi nai r e schedul e on pr oj ect pl ans per I ES HB- 10.

f . Housi ng f i ni sh shal l be baked- on enamel , anodi zed, or baked- on powder coat pai nt . Fi ni sh shal l be capabl e of sur vi v i ng ASTM B117 sal t f og envi r onment t est i ng f or 2500 hour s mi ni mum wi t hout bl i st er i ng or peeling.

g. Lumi nai r es shal l not exceed t he f ol l owi ng I ES TM- 15 Backl i ght , Upl i ght and Gl ar e ( B. U. G. ) r at i ngs:

1. Maxi mum Backl i ght ( B) r at i ng shal l be det er mi ned by l i ght i ng zone i n whi ch l umi nai r e i s pl aced and as i ndi cat ed on t he f i xt ur e details.

2. Maxi mum Upl i ght ( U) r at i ng shal l be U0.

3. Maxi mum Gl ar e ( G) r at i ng shal l be det er mi ned by l i ght i ng zone i n whi ch l umi nai r e i s pl aced and as i ndi cat ed on t he f i xt ur e det ai l s.

h. Lumi nai r es shal l be f ul l y assembl ed and el ect r i cal l y t est ed pr i or t o shi pment f r om f act or y.

i . The f i ni sh col or shal l be as i ndi cat ed i n t he l umi nai r e schedul e or det ai l on t he pr oj ect pl ans.

j . Lumi nai r e ar m bol t s shal l be 304 st ai nl ess st eel or z i nc- pl at ed st eel .

k. Lumi nai r e l enses shal l be const r uct ed of f r ost ed t emper ed gl ass or UV- r esi st ant acr yl i c. Pr ovi de pol ycar bonat e vandal - r esi st ant l enses as i ndi cat ed.

l . The wi r i ng compar t ment on pol e- mount ed, st r eet and ar ea l umi nai r es must be accessi bl e wi t hout t he use of hand t ool s t o mani pul at e smal l scr ews, bol t s, or har dwar e.

l m. I ncor por at e modul ar el ect r i cal connect i ons, and const r uct l umi nai r es t o al l ow r epl acement of al l or any par t of t he opt i cs, heat s i nks, power suppl y uni t s, bal l ast s, sur ge suppr essor s and ot her el ect r i cal component s usi ng onl y a s i mpl e t ool , such as a manual or cor dl ess el ect r i c scr ewdr i ver .

mn. Lumi nai r es shal l have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , dat e of manuf act ur e, and ser i al number secur el y af f i xed i n a conspi cuous pl ace. The namepl at e of t he di st r i but i ng agent wi l l not be accept abl e.

no. Roadway and Aar ea l umi nai r es shal l have an i nt egr al t i l t adj ust ment of pl us or mi nus 5 degr ees t o al l ow t he uni t t o be l evel ed i n accor dance wi t h ANSI C136. 3.

op. Lumi nai r e must pass 3G vi br at i on t est i ng i n accor dance wi t h

NEMA C136. 31.

qp. Al l f act or y el ect r i cal connect i ons shal l be made usi ng cr i mp, l ocki ng, or l at chi ng st y l e connect or s. Twi st - st y l e wi r e nut s ar e not acceptable.

SECTI ON 26 56 00 Page 9

09/21/18 2: 14 PM

e3endtk9 Highlight

2. 1. 2 Lumi nai r e Li ght Sour ces

2. 1. 2. 1 LED Li ght Sour ces

a. Cor r el at ed Col or Temper at ur e ( CCT) shal l be i n accor dance wi t h

NEMA ANSLG C78. 377:

Nomi nal CCT: 4000K f or ar eas not cover ed by t he June 2015 Endanger ed Speci es Act . See map f or t he del i neat ed ar eas.

b. Col or Render i ng I ndex ( CRI ) shal l be:

Gr eat er t han or equal t o 70 f or 3000 and 4000 degr ees K l i ght sour ces.

c. Col or Consi st ency:

Manuf act ur er shal l ut i l i ze a maxi mum 4- st ep MacAdam el l i pse bi nni ng t ol er ance f or col or consi st ency of LEDs used i n l umi nai r es.

2. 1. 3 Lumi nai r e Power Suppl y Uni t s ( Dr i ver s)

2. 1. 3. 1 LED power Suppl y Uni t s ( Dr i ver s)

UL 1310. LED Power Suppl y Uni t s ( Dr i ver s) shal l meet t he f ol l owi ng requirements:

a. Mi ni mum ef f i c i ency shal l be 90 per cent .

b. Dr i ve cur r ent t o each i ndi v i dual LED shal l not exceed 600 mA, pl us or mi nus 10 per cent .

c. Shal l be r at ed t o oper at e bet ween ambi ent t emper at ur es of mi nus 22 degr ees F and122 degr ees F.

d. Shal l be desi gned t o oper at e on t he vol t age syst em ( br anch ci r cui t vol t age) t o whi ch t hey ar e connect ed, t ypi cal l y r angi ng f r om 120 V t o 480 V nomi nal .

e. Oper at i ng f r equency shal l be: 50 or 60 Hz.

f . Power Fact or ( PF) shal l be gr eat er t han or equal t o 0. 90.

g. Tot al Har moni c Di st or t i on ( THD) cur r ent shal l be l ess t han or equal t o 10 per cent .

h. Shal l meet r equi r ement s of 47 CFR 15, Cl ass B.

i . Shal l be RoHS- compl i ant .

j . Shal l be mount ed i nt egr al t o l umi nai r e. Remot e mount i ng of power suppl y i s not al l owed.

k. Power suppl i es i n l umi nai r es mount ed under a cover ed st r uct ur e, such as a canopy, or wher e ot her wi se appr opr i at e shal l be UL l i s t ed wi t h a sound r at i ng of A.

SECTI ON 26 56 00 Page 10 l . Shal l be di mmabl e, and compat i bl e wi t h a st andar d di mmi ng cont r ol c i r cui t of 0 - 10V or ot her appr oved di mmi ng syst em.

m. Shal l be equi pped wi t h over - t emper at ur e pr ot ect i on c i r cui t t hat t ur ns l i ght sour ce of f unt i l nor mal oper at i ng t emper at ur e i s achi eved.

2. 1. 4 LED Lumi nai r e Sur ge Pr ot ect i on

Pr ovi de sur ge pr ot ect i on i nt egr al t o l umi nai r e t o meet C Low wavef or ms as def i ned by I EEE C62. 41. 2, Scenar i o 1, Locat i on Cat egor y C.

2. 2 EXTERI OR LUMI NAI RE CONTROLS

Cont r ol s shal l compl y wi t h Sect i on 9 of ASHRAE 90. 1 - I P, . Pr ovi de a cont r ol syst em i nt er f ace wi t hi n each l umi nai r e t hat i s compat i bl e wi t h t he ener gy management or cont r ol syst em used by t he ut i l i t y depar t ment i n char ge of t he pr oj ect ar ea f or cont r ol of s i t e l i ght i ng. Cont r ol of t he ext er i or l i ght i ng f i x t ur es shal l also capabl e of bei ng cont r ol l ed by be vi a connect i on t o t he exi st i ng base EMCs Syst em, v i a t he Bui l di ng Aut omat i on Syst em ( DDC) . Pr ovi de al l i nt er f aci ng devi ces ( r el ays, cont act or s, et c) r equi r ed t o i nt er f ace t o t he DDC Syst em. Cont r act or shal l al so be r equi r ed t o pr ovi de any pr ogr ammi ng and ot her modi f i cat i ons t o t he Bui l di ng DDC syst em r equi r ed t o i nt er f ace t o t he basewi de EMCS, t o al l ow t he r emot e cont r ol of t he ext er i or l i ght i ng f r om t he EMCS cent r al st at i on. See at t ached Bui l di ng Ext er i or Li ght i ng Det ai l and Cont r ol Sequence at t he end of t hi s speci f i cat i on sect i on f or addi t i onal requirements.

2. 2. 1 Photocell

UL 773 or UL 773A. Phot ocel l s shal l be her met i cal l y seal ed, s i l i con di ode l i ght sensor t ype, r at ed at wat t age r at i ng as r equi r ed, 277 vol t s, 50/ 60 Hz wi t h s i ngl e- pol e, s i ngl e or doubl e- t hr ow cont act s. Phot ocel l shal l be desi gned t o f ai l t o t he ON posi t i on. Housi ng shal l be const r uct ed of di e cast al umi num, r at ed t o oper at e wi t hi n a t emper at ur e r ange of mi nus 40 t o 158 degr ees F. Phot ocel l shal l have a 1/ 2 i n t hr eaded base f or mount i ng t o a j unct i on box or condui t . Pr ovi de f i xed base t ype housi ng. Phot ocel l shal l be t wi st - l ock r ecept acl e t ype conf or mi ng t o NEMA C136. 10. Pr ovi de wi t h sol i d br ass pr ongs and vol t age mar ki ngs and col or codi ng on ext er i or of housi ng. Phot ocel l shal l t ur n on at 1- 3 f oot candl es and t ur n of f at 3 t o 15 f oot candl es. A t i me del ay shal l pr event acci dent al swi t chi ng f r om t r ansi ent l i ght sour ces. Pr ovi de a di r ect i onal l ens i n f r ont of t he cel l t o pr event f i xed l i ght sour ces f r om cr eat i ng a t ur nof f condi t i on. Pr ovi de phot ocel l wi t h met al oxi de var i st or ( MOV) t ype sur ge pr ot ect i on. Phot ocel l shal l be of t ype sui t abl e f or i nst al l at i on wi t hh a l i ght i ng cont r ol syst em.

2. 2. 2 Li ght i ng Cont act or

NEMA I CS 2. Pr ovi de a el ect r i cal l y oper at ed mechani cal l y- hel d l i ght i ng cont act or housed i n a NEMA 4X encl osur e conf or mi ng t o NEMA I CS 6.

Cont act or shal l have 2 pol es, conf i gur ed as nor mal l y open NO. Cont act s shal l be r at ed 600 vol t s, 30 amper es f or a r esi st i ve l oad. Coi l oper at i ng vol t age shal l be 277 vol t s. Cont act or shal l have si l ver cadmi um oxi de doubl e- br eak cont act s and coi l c l ear i ng cont act s f or mechani cal l y hel d cont act or s and shal l r equi r e no ar ci ng cont act s. Pr ovi de cont act or wi t h hand- of f - aut omat i c sel ect or swi t ch. Pr ovi de cont act or as speci f i ed above al ong wi t h di sconnect swi t ch i n i nt egr al NEMA 4X encl osur e wi t h

SECTI ON 26 56 00 Page 11

09/21/18 2: 14 PM

e3endtk9 Highlight f l ange- mount ed handl e t o sat i sf y r equi r ement f or a " combi nat i on l i ght i ng cont act or " when speci f i ed.

2. 2. 3 Li ght i ng Cont r ol Rel ay Panel , i f r equi r ed.

Panel shal l consi st of a s i ngl e NEMA 4X sur f ace- mount ed or suppor t mount ed encl osur e wi t h t wo separ at e i nt er i or sect i ons; one f or Cl ass 1 ( br anch ci r cui t ) and one f or Cl ass 2 ( l ow vol t age) wi r i ng. Pr ovi de panel wi t h 32 r el ays. Panel shal l be desi gned as an aut omat ed cont r ol syst em i nt er f ace t ype. The Cl ass 1 sect i on shal l cont ai n t he l oad si de of al l r el ays and t he i ncomi ng br anch ci r cui t wi r i ng. The Cl ass 2 sect i on shal l cont ai n t he cont r ol power t r ansf or mer ( 24 vol t out put ) , r el ays, r el ay cont r ol modul es, and cont r ol wi r i ng, and nat i ve BACnet f i el d- pr ogr ammabl e appl i cat i on cont r ol l er f or panel s connect ed t o t he f aci l i t y aut omat ed cont r ol syst em.

Panel encl osur e shal l be const r uct ed of 14 gauge col d- r ol l ed st eel wi t h baked- on enamel f i ni sh. Panel shal l meet r equi r ement s of UL 916, ASHRAE 90. 1 - I P, CEC Ti t l e 24 and 47 CFR 15.

Rel ays shal l be 1- pol e, r at ed at 20 amper es 480 VAC wi t h r at ed l i f e of 120, 000 mechani cal oper at i ons mi ni mum.

Rel ay cont r ol modul e shal l be 24 vol t , el ect r oni c t ype and cont r ol up t o 16 4 separ at e r el ays ( 164 channel ) or pr ogr ammed gr oups of r el ays. Pr ovi de wi t h i nput s f or s i gnal s f r om devi ces such as phot ocel l s, t i mecl ocks, and mot i on sensor s. Rel ay cont r ol modul e wi t h i nt egr al t i mecl ock f unct i on shal l be 24 vol t , el ect r oni c t ype wi t h LCD di spl ay and cont r ol up t o 8 separ at e r el ays ( 8 channel ) .

2. 3 BRACKETS AND SUPPORTS

ANSI C136. 3, ANSI C136. 13, and ANSI C136. 21, as appl i cabl e. Pol e br acket s shal l be not l ess t han 1 1/ 4 i nch gal vani zed st eel pi pe or al umi num secur ed t o pol e. Sl i p- f i t t er or pi pe- t hr eaded br acket s may be used, but br acket s shal l be coor di nat ed t o l umi nai r es pr ovi ded, and br acket s f or use wi t h one t ype of l umi nai r e shal l be i dent i cal . Br acket s f or pol e- mount ed st r eet l i ght s shal l cor r ect l y posi t i on l umi nai r e no l ower t han mount i ng hei ght i ndi cat ed. Mount br acket s not l ess t han 24 f eet above st r eet .

Speci al mount i ngs or br acket s shal l be as i ndi cat ed and shal l be of met al whi ch wi l l not pr omot e gal vani c r eact i on wi t h l umi nai r e head.

2. 4 EQUI PMENT I DENTI FI CATI ON

2. 4. 1 Manuf act ur er ' s Namepl at e

Each i t em of equi pment shal l have a namepl at e bear i ng t he manuf act ur er ' s name, addr ess, model number , and ser i al number secur el y af f i xed i n a conspi cuous pl ace; t he namepl at e of t he di st r i but i ng agent wi l l not be acceptable.

2. 4. 2 Labels

Pr ovi de l abel ed l umi nai r es i n accor dance wi t h UL 1598 r equi r ement s.

Lumi nai r es shal l be c l ear l y mar ked f or oper at i on of speci f i c l i ght sour ces and bal l ast s accor di ng t o pr oper l i ght sour ce t ype. The f ol l owi ng l i ght sour ce char act er i st i cs shal l be not ed i n t he f or mat " Use Onl y _____" :

a. Cor r el at ed col or t emper at ur e ( CCT) and col or r ender i ng i ndex ( CRI ) f or al l l umi nai r es.

b. Wat t age and vol t age of l umi nai r e.

SECTI ON 26 56 00 Page 12

09/21/18 2: 14 PM

e3endtk9 Highlight

Mar ki ngs r el at ed t o l amp t ype shal l be c l ear and l ocat ed t o be r eadi l y v i s i bl e t o ser vi ce per sonnel , but unseen f r om nor mal v i ewi ng angl es when l amps ar e i n pl ace. Bal l ast s or dr i ver s shal l have cl ear mar ki ngs i ndi cat i ng mul t i - l evel out put s and i ndi cat e pr oper t er mi nal s f or t he var i ous out put s.

2. 5 FACTORY APPLI ED FI NI SH

El ect r i cal equi pment shal l have f act or y- appl i ed pai nt i ng syst ems whi ch shal l , as a mi ni mum, meet t he r equi r ement s of NEMA 250 cor r osi on- r esi st ance t est .

PART 3 EXECUTI ON

3. 1 INSTALLATION

El ect r i cal i nst al l at i ons shal l conf or m t o I EEE C2, NFPA 70, and t o t he r equi r ement s speci f i ed her ei n.

3. 1. 1 Phot ocel l Swi t ch Ai mi ng

Ai m swi t ch accor di ng t o manuf act ur er ' s r ecommendat i ons. Mount swi t ch on or besi de each l umi nai r e when swi t ch i s pr ovi ded i n cast weat her pr oof al umi num housi ng wi t h swi vel ar m.

3. 1. 2 GROUNDING

Gr ound noncur r ent - car r y i ng par t s of equi pment i ncl udi ng met al pol es, l umi nai r es, mount i ng ar ms, br acket s, and met al l i c encl osur es v i a an dr i v i en gr ound r od gr oudi ng el ect r ode and t o t he equi pment gr oundi ng conduct or i n t he br anch ci r cui t . Wher e copper gr oundi ng conduct or i s connect ed t o a met al ot her t han copper , pr ovi de speci al l y t r eat ed or l i ned connect or s sui t abl e f or t hi s pur pose.

3. 1. 3 FI ELD APPLI ED PAI NTI NG

Pai nt el ect r i cal equi pment as r equi r ed t o mat ch f i ni sh of adj acent sur f aces or t o meet t he i ndi cat ed or speci f i ed saf et y cr i t er i a.

3. 2 FI ELD QUALI TY CONTROL

Upon compl et i on of i nst al l at i on, ver i f y t hat equi pment i s pr oper l y i nst al l ed, connect ed, and adj ust ed. Conduct an oper at i ng t est af t er 100 hour s of bur n- i n t i me t o show t hat t he equi pment oper at es i n accor dance wi t h t he r equi r ement s of t hi s sect i on.

- - End of Sect i on - - f

SECTI ON 26 56 00 Page 13

SECTI ON 31 00 00

EARTHWORK

08/08

PART 1 GENERAL

1. 1 CRI TERI A FOR BI DDI NG

Base bi ds on t he f ol l owi ng cr i t er i a:

a. Sur f ace el evat i ons ar e as i ndi cat ed.

b. Pi pes or ot her ar t i f i c i al obst r uct i ons, except t hose i ndi cat ed, wi l l not be encount er ed.

c. Gr ound wat er el evat i ons i ndi cat ed by t he bor i ng l og wer e t hose exi st i ng at t he t i me subsur f ace i nvest i gat i ons wer e made and do not necessar i l y r epr esent gr ound wat er el evat i on at t he t i me of construction.

d. Mat er i al char act er i s i ndi cat ed by t he bor i ng l ogs.

1. 2 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

(AASHTO)

AASHTO T 180 ( 2017) St andar d Met hod of Test f or Moi st ur e- Densi t y Rel at i ons of Soi l s Usi ng a 4. 54- kg ( 10- l b) Rammer and a 457- mm ( 18- i n. ) Dr op

AASHTO T 224 ( 2010) St andar d Met hod of Test f or Cor r ect i on f or Coar se Par t i c l es i n t he Soi l Compact i on Test

ASTM I NTERNATI ONAL ( ASTM)

ASTM C136/ C136M ( 2014) St andar d Test Met hod f or Si eve Anal ysi s of Fi ne and Coar se Aggr egat es

ASTM C33/ C33M ( 2016) St andar d Speci f i cat i on f or Concr et e Aggregates

ASTM D1140 ( 2017) St andar d Test Met hods f or Det er mi ni ng t he Amount of Mat er i al Fi ner t han 75- µm ( No. 200) Si eve i n Soi l s by Washing

ASTM D1556/ D1556M ( 2015; E 2016) St andar d Test Met hod f or Densi t y and Uni t Wei ght of Soi l i n Pl ace by Sand- Cone Met hod

SECTI ON 31 00 00 Page 1

09/21/18 1: 11 PM

ASTM D1557 ( 2012; E 2015) St andar d Test Met hods f or Labor at or y Compact i on Char act er i st i cs of Soi l Usi ng Modi f i ed Ef f or t ( 56, 000 f t - l bf / f t 3) ( 2700 kN- m/ m3)

ASTM D2487 ( 2011) Soi l s f or Engi neer i ng Pur poses ( Uni f i ed Soi l Cl assi f i cat i on Syst em)

ASTM D4318 ( 2017) St andar d Test Met hods f or Li qui d Li mi t , Pl ast i c Li mi t , and Pl ast i c i t y I ndex of Soi l s

ASTM D6938 ( 2017) St andar d Test Met hod f or I n- Pl ace Densi t y and Wat er Cont ent of Soi l and Soi l - Aggr egat e by Nucl ear Met hods ( Shal l ow Depth)

ASTM D698 ( 2012; E 2014; E 2015) Labor at or y Compact i on Char act er i st i cs of Soi l Usi ng St andar d Ef f or t ( 12, 400 f t - l bf / cu. f t .

( 600 kN- m/ cu. m. ) )

1. 3 DEFINITIONS

1. 3. 1 Sat i sf act or y Mat er i al s

Sat i sf act or y mat er i al s compr i se any mat er i al s c l assi f i ed by ASTM D2487 as GW, GP, SW, SP, SM, SW- SM, SP- SM. Sat i sf act or y mat er i al s f or gr adi ng compr i se st ones l ess t han 8 i nches, except f or f i l l mat er i al f or pavement s and r ai l r oads whi ch compr i se st ones l ess t han 3 i nches i n any di mensi on.

1. 3. 2 Unsat i sf act or y Mat er i al s

Mat er i al s whi ch do not compl y wi t h t he r equi r ement s f or sat i sf act or y mat er i al s ar e unsat i sf act or y. Unsat i sf act or y mat er i al s al so i ncl ude man- made f i l l s ; t r ash; r ef use; backf i l l s f r om pr evi ous const r uct i on; and mat er i al c l assi f i ed as sat i sf act or y whi ch cont ai ns r oot and ot her or gani c mat t er or f r ozen mat er i al . Not i f y t he Cont r act i ng Of f i cer when encount er i ng any cont ami nat ed mat er i al s.

1. 3. 3 Cohesi onl ess and Cohesi ve Mat er i al s

Cohesi onl ess mat er i al s i ncl ude mat er i al s c l assi f i ed i n ASTM D2487 as GW, GP, SW, and SP. Cohesi ve mat er i al s i ncl ude mat er i al s c l assi f i ed as GC, SC, ML, CL, MH, and CH. Mat er i al s c l assi f i ed as GM and SM wi l l be i dent i f i ed as cohesi onl ess onl y when t he f i nes ar e nonpl ast i c. Per f or m t est i ng, r equi r ed f or c l assi f y i ng mat er i al s, i n accor dance wi t h ASTM D4318, ASTM C136/ C136M and ASTM D1140.

1. 3. 4 Degr ee of Compact i on

Degr ee of compact i on r equi r ed, except as not ed i n t he second sent ence, i s expr essed as a per cent age of t he maxi mum densi t y obt ai ned by t he t est pr ocedur e pr esent ed i n ASTM D1557 abbr evi at ed as a per cent of l abor at or y maxi mum densi t y. Si nce ASTM D1557 appl i es onl y t o soi l s t hat have 30 per cent or l ess by wei ght of t hei r par t i c l es r et ai ned on t he 3/ 4 i nch si eve, expr ess t he degr ee of compact i on f or mat er i al havi ng mor e t han 30 per cent by wei ght of t hei r par t i c l es r et ai ned on t he 3/ 4 i nch si eve as a

SECTI ON 31 00 00 Page 2 per cent age of t he maxi mum densi t y i n accor dance wi t h AASHTO T 180 and cor r ect ed wi t h AASHTO T 224. To mai nt ai n t he same per cent age of coar se mat er i al , use t he " r emove and r epl ace" pr ocedur e as descr i bed i n NOTE 8 of Par agr aph 7. 2 i n AASHTO T 180.

1. 3. 5 Topsoil

Mat er i al sui t abl e f or t opsoi l s obt ai ned f r om Of f s i t e ar ea i s def i ned as:

Nat ur al , f r i abl e soi l r epr esent at i ve of pr oduct i ve, wel l - dr ai ned soi l s i n t he ar ea, f r ee of subsoi l , st umps, r ocks l ar ger t han one i nch di amet er , br ush, weeds, t oxi c subst ances, and ot her mat er i al det r i ment al t o pl ant gr owt h. Amend t opsoi l pH r ange t o obt ai n a pH of 5. 5 t o 7.

1. 3. 6 Unst abl e Mat er i al ( St r uct ur al Fi l l )

Unst abl e mat er i al s ar e t oo wet t o pr oper l y suppor t t he ut i l i t y pi pe, condui t , or appur t enant st r uct ur e.

1. 3. 7 Sel ect Gr anul ar Mat er i al

1. 3. 7. 1 Gener al Requi r ement s

Sel ect gr anul ar mat er i al ( St r uct ur al f i l l ) consi st of mat er i al s c l assi f i ed as GW, GP, SW, SP, by ASTM D2487 wher e i ndi cat ed. The l i qui d l i mi t of such mat er i al must not exceed 35 per cent when t est ed i n accor dance wi t h ASTM D4318. The pl ast i c i t y i ndex must not be gr eat er t han 12 per cent when t est ed i n accor dance wi t h ASTM D4318, and not mor e t han 10 per cent by wei ght may be f i ner t han No. 200 si eve when t est ed i n accor dance wi t h

ASTM D1140.

1. 4 SYSTEM DESCRI PTI ON

Subsur f ace soi l bor i ng l ogs ar e appended t o t he SPECI AL CONTRACT REQUI REMENTS. These dat a r epr esent t he best subsur f ace i nf or mat i on avai l abl e; however , var i at i ons may exi st i n t he subsur f ace bet ween bor i ng locations.

1. 4. 1 Cl assi f i cat i on of Excavat i on

No consi der at i on wi l l be gi ven t o t he nat ur e of t he mat er i al s, and al l excavat i on wi l l be desi gnat ed as uncl assi f i ed excavat i on.

1. 4. 2 Dewat er i ng Wor k Pl an

Submi t pr ocedur es f or accompl i shi ng dewat er i ng wor k.

1. 5 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Shor i ng; G, RO

SECTI ON 31 00 00 Page 3

Dewat er i ng Wor k Pl an; G, RO

SD- 03 Pr oduct Dat a

Ut i l i zat i on of Excavat ed Mat er i al s; G, RO Openi ng of any Excavat i on or Bor r ow Pi t ; G, RO

SD- 06 Test Repor t s

Test i ng; G, RO

Bor r ow Si t e Test i ng; G, RO

Wi t hi n 24 hour s of concl usi on of physi cal t est s, submi t 2 copi es of t est r esul t s, i ncl udi ng cal i br at i on cur ves and r esul t s of cal i br at i on t est s.

SD- 07 Cer t i f i cat es

Test i ng; G, RO

PART 2 PRODUCTS

2. 1 REQUI REMENTS FOR OFFSI TE SOI LS

Test of f s i t e soi l s br ought i n f or use as backf i l l f or Tot al Pet r ol eum Hydr ocar bons ( TPH) , Benzene, Tol uene, Et hyl Benzene, and Xyl ene ( BTEX) and f ul l Toxi c i t y Char act er i st i c Leachi ng Pr ocedur e ( TCLP) i ncl udi ng i gni t abi l i t y , cor r osi v i t y and r eact i v i t y. Backf i l l shal l cont ai n a maxi mum of 100 par t s per mi l l i on ( ppm) of t ot al pet r ol eum hydr ocar bons ( TPH) and a maxi mum of 10 ppm of t he sum of Benzene, Tol uene, Et hyl Benzene, and Xyl ene ( BTEX) and shal l pass t he TCPL t est . Det er mi ne TPH concent r at i ons by usi ng EPA 600/ 4- 79/ 020 Met hod 418. 1. Det er mi ne BTEX concent r at i ons by usi ng EPA SW- 846. 3- 3 Met hod 5030/ 8020. Per f or m TCLP i n accor dance wi t h EPA SW- 846. 3- 3 Met hod 1311. Pr ovi de Bor r ow Si t e Test i ng f or TPH, BTEX and TCLP f r om a composi t e sampl e of mat er i al f r om t he bor r ow si t e, wi t h at l east one t est f r om each bor r ow si t e. Do not br i ng mat er i al onsi t e unt i l t est s have been appr oved by t he Cont r act i ng Of f i cer .

2. 2 BURI ED WARNI NG AND I DENTI FI CATI ON TAPE

Pr ovi de pol yet hyl ene pl ast i c war ni ng t ape manuf act ur ed speci f i cal l y f or war ni ng and i dent i f i cat i on of bur i ed ut i l i t y l i nes. Pr ovi de t ape on r ol l s, 3 i nches mi ni mum wi dt h, col or coded as speci f i ed bel ow f or t he i nt ended ut i l i t y wi t h war ni ng and i dent i f i cat i on i mpr i nt ed i n bol d bl ack l et t er s cont i nuousl y over t he ent i r e t ape l engt h. War ni ng and i dent i f i cat i on t o r ead, " CAUTI ON, BURI ED ( i nt ended ser vi ce) LI NE BELOW" or s i mi l ar wor di ng. Pr ovi de per manent col or and pr i nt i ng, unaf f ect ed by moi st ur e or soi l .

War ni ng Tape Col or Codes

Red Electric

Yellow Gas, Oi l ; Danger ous Mat er i al s

SECTI ON 31 00 00 Page 4

War ni ng Tape Col or Codes

Orange Tel ephone and Ot her Communi cat i ons

Blue Wat er Syst ems

Green Sewer Syst ems

White St eam Syst ems

Gray Compr essed Ai r

2. 3 Beddi ng Mat er i al

Pr ovi de beddi ng mat er i al consi st i ng of sand, gr avel , or cr ushed r ock, wel l gr aded, wi t h a maxi mum par t i c l e s i ze of 2 i nches. Compose mat er i al of t ough, dur abl e par t i c l es. Al l ow f i nes passi ng t he No. 200 st andar d s i eve wi t h a pl ast i c i t y i ndex l ess t han si x.

2. 4 CAPI LLARY WATER BARRI ER

Pr ovi de capi l l ar y wat er bar r i er of c l ean, poor l y gr aded cr ushed r ock, cr ushed gr avel , or uncr ushed gr avel pl aced beneat h a bui l di ng s l ab.

Conf or m t o ASTM C33/ C33M f or f i ne aggr egat e gr adi ng wi t h a maxi mum of 3 per cent by wei ght passi ng ASTM D1140, No. 200 si eve.

PART 3 EXECUTI ON

3. 1 STRI PPI NG OF TOPSOI L

Wher e i ndi cat ed or di r ect ed, st r i p t opsoi l t o a dept h of 4 i nches. Spr ead t opsoi l on ar eas al r eady gr aded and pr epar ed f or t opsoi l , or t r anspor t ed and deposi t ed i n st ockpi l es conveni ent t o ar eas t hat ar e t o r ecei ve appl i cat i on of t he t opsoi l l at er , or at l ocat i ons i ndi cat ed or speci f i ed.

Keep t opsoi l separ at e f r om ot her excavat ed mat er i al s, br ush, l i t t er , obj ect i onabl e weeds, r oot s, st ones l ar ger t han 2 i nches i n di amet er , and ot her mat er i al s t hat woul d i nt er f er e wi t h pl ant i ng and mai nt enance oper at i ons. Remove f r om t he si t e any sur pl us of t opsoi l f r om excavat i ons and gr adi ngs.

3. 2 GENERAL EXCAVATI ON

Per f or m excavat i on of ever y t ype of mat er i al encount er ed wi t hi n t he l i mi t s of t he pr oj ect t o t he l i nes, gr ades, and el evat i ons i ndi cat ed and as speci f i ed. Per f or m t he gr adi ng i n accor dance wi t h t he t ypi cal sect i ons shown and t he t ol er ances speci f i ed i n par agr aph FI NI SHI NG. Tr anspor t sat i sf act or y excavat ed mat er i al s and pl ace i n f i l l wi t hi n t he l i mi t s of t he wor k. Excavat e unsat i sf act or y mat er i al s encount er ed wi t hi n t he l i mi t s of t he wor k bel ow gr ade and r epl ace wi t h sat i sf act or y mat er i al s as di r ect ed. I ncl ude such excavat ed mat er i al and t he sat i sf act or y mat er i al or der ed as r epl acement i n excavat i on. Di spose sur pl us sat i sf act or y excavat ed mat er i al not r equi r ed f or f i l l i n ar eas appr oved f or sur pl us mat er i al st or age or desi gnat ed wast e ar eas. Di spose unsat i sf act or y excavat ed mat er i al i n desi gnat ed wast e or spoi l ar eas. Dur i ng const r uct i on, per f or m excavat i on and f i l l i n a manner and sequence t hat wi l l pr ovi de pr oper dr ai nage at al l t i mes. Excavat e mat er i al r equi r ed f or

SECTI ON 31 00 00 Page 5 f i l l or embankment i n excess of t hat pr oduced by excavat i on wi t hi n t he gr adi ng l i mi t s f r om t he bor r ow ar eas i ndi cat ed or f r om ot her appr oved ar eas sel ect ed by t he Cont r act or as speci f i ed.

3. 2. 1 Dr ai nage St r uct ur es

Make excavat i ons t o t he l i nes, gr ades, and el evat i ons shown, or as di r ect ed. Pr ovi de t r enches and f oundat i on pi t s of suf f i c i ent s i ze t o per mi t t he pl acement and r emoval of f or ms f or t he f ul l l engt h and wi dt h of st r uct ur e f oot i ngs and f oundat i ons as shown. Do not di st ur b t he bot t om of t he excavat i on when concr et e or masonr y i s t o be pl aced i n an excavat ed ar ea. Do not excavat e t o t he f i nal gr ade l evel unt i l j ust bef or e t he concr et e or masonr y i s t o be pl aced.

3. 2. 2 Drainage

Pr ovi de f or t he col l ect i on and di sposal of sur f ace and subsur f ace wat er encount er ed dur i ng const r uct i on. Compl et el y dr ai n const r uct i on s i t e dur i ng per i ods of const r uct i on t o keep soi l mat er i al s suf f i c i ent l y dr y.

Const r uct st or m dr ai nage f eat ur es at t he ear l i est st ages of s i t e devel opment , and t hr oughout const r uct i on gr ade t he const r uct i on ar ea t o pr ovi de posi t i ve sur f ace wat er r unof f away f r om t he const r uct i on act i v i t y or pr ovi de t empor ar y di t ches, swal es, and ot her dr ai nage f eat ur es and equi pment as r equi r ed t o mai nt ai n dr y soi l s. When unsui t abl e wor ki ng pl at f or ms f or equi pment oper at i on and unsui t abl e soi l suppor t f or subsequent const r uct i on f eat ur es devel op, r emove unsui t abl e mat er i al and pr ovi de new soi l mat er i al as speci f i ed her ei n. I t i s t he r esponsi bi l i t y of t he Cont r act or t o assess t he soi l and gr ound wat er condi t i ons pr esent ed by t he pl ans and speci f i cat i ons and t o empl oy necessar y measur es t o per mi t const r uct i on t o pr oceed.

3. 2. 3 Dewatering

Cont r ol gr oundwat er f l owi ng t owar d or i nt o excavat i ons t o pr event s l oughi ng of excavat i on s l opes and wal l s, boi l s, upl i f t and heave i n t he excavat i on and t o el i mi nat e i nt er f er ence wi t h or der l y pr ogr ess of const r uct i on. Do not per mi t Fr ench dr ai ns, sumps, di t ches or t r enches wi t hi n 3 f eet of t he f oundat i on of any st r uct ur e, except wi t h speci f i c wr i t t en appr oval , and af t er speci f i c cont r act ual pr ovi s i ons f or r est or at i on of t he f oundat i on ar ea have been made. Take cont r ol measur es by t he t i me t he excavat i on r eaches t he wat er l evel i n or der t o mai nt ai n t he i nt egr i t y of t he i n s i t u mat er i al . Whi l e t he excavat i on i s open, mai nt ai n t he wat er l evel cont i nuousl y, at l east 2 f eet bel ow t he wor ki ng l evel . Oper at e dewat er i ng syst em cont i nuousl y unt i l const r uct i on wor k bel ow exi st i ng wat er l evel s i s compl et e. Submi t per f or mance r ecor ds weekly.

3. 2. 4 Tr ench Excavat i on Requi r ement s

Excavat e t he t r ench as r ecommended by t he manuf act ur er of t he pi pe t o be i nst al l ed. Sl ope t r ench wal l s bel ow t he t op of t he pi pe, or make ver t i cal , and of such wi dt h as r ecommended i n t he manuf act ur er ' s pr i nt ed i nst al l at i on manual . Pr ovi de ver t i cal t r ench wal l s wher e no manuf act ur er ' s pr i nt ed i nst al l at i on manual i s avai l abl e. Shor e t r ench wal l s mor e t han 2 f eet hi gh, or as r equi r ed by OSHA excavat i on r egul at i ons or cut back t o a st abl e s l ope, or pr ovi de wi t h equi val ent means of pr ot ect i on f or empl oyees who may be exposed t o movi ng gr ound or cave i n.

Excavat e t r ench wal l s whi ch ar e cut back t o at l east t he angl e of r epose of t he soi l . Gi ve speci al at t ent i on t o s l opes whi ch may be adver sel y

SECTI ON 31 00 00 Page 6 af f ect ed by weat her or moi st ur e cont ent .