B.08.02 Solicitation Synopsis posted version.pdf

Section A - Solicitation/Contract Form

SYNOPSIS/SOLICITATION

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

The solicitation number for this acquisition is W912DQ-20-R-1019 and it is being issued as a Request for Proposals (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-94 (effective 19 January 2017).

This acquisition is set aside 100% for small business concerns. The associated North American Industry Classification System (NAICS) code is 561730 “Landscaping Services” and the associated small business size standard is $8,000,000.00.

A list of the contract line item numbers and items, quantities, and units of measure are detailed in Section B of this combined synopsis/solicitation.

A description of requirements for the items to be acquired are detailed in Section C of this combined synopsis/solicitation.

The dates and places of delivery and acceptance are detailed in Sections E and F of this combined synopsis/solicitation.

FAR 52.212-1, Instructions to Offerors – Commercial, does apply to this acquisition with no addenda to the provision.

FAR 52.212-2, Evaluation – Commercial Items, does apply to this acquisition. In accordance with FAR 13.106, the solicitation will be awarded to the offeror providing the best value to the Government based upon three (3) evaluation factors: Past Performance, Relative Experience, and Price.

Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items, with its proposal. This provision is included in Section K of this combined synopsis/solicitation. If the offeror has up-to-date representations and certifications in the System for Award Management (SAM) website, then this completed provision is not required to be submitted with the offeror’s proposal.

FAR 52.212-4, Contract Terms and Conditions – Commercial Items, does apply to this acquisition with no addenda to the provision.

FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items, applies to this acquisition. The specific clauses required are detailed in Section I of this combined synopsis/solicitation.

VENDORS INTERESTED IN RESPONDING TO THIS COMBINED SYNOPSIS/SOLICITATION MUST

SUBMIT THEIR PROPOSAL ON THE ATTACHED FORM. Any questions must be submitted by e-mail to the point of contact below.

The System for Award Management (SAM) is a Federal Government owned and operated free web site that consolidates the capabilities in CCR, ORCA, and EPLS. All vendors must verify their information through this web site. If you were previously registered in CCR and ORCA, your organization’s information is already in SAM. You just need to set up a SAM account and migrate your CCR roles. If you were previously registered in CCR, your registration should have been moved to SAM, and you just need to open an account, see the following link for instructions: https://www.sam.gov/sam/transcript/Quick_Guide_for_Migrating_Roles_v1.8.pdf.

If you were not previously registered, please go to https://www.sam.gov. Instructions for new registration are also located at the following link https://www.sam.gov/sam/transcript/Quick_Guide_for_Contract_Registrations_v1.7.pdf to register.

Contractors may obtain information on registration and annual confirmation requirements via the Internet at http://www.sam.gov or by calling (866) 606-8220.

If you have questions about Government procurements in general or need assistance in the preparation of your proposal, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptacus.org/new/Govt_Contracting/find.php.

The due date for the receipt of proposals is 21 February 2020. The due date for the receipt of questions in regards to this combined synopsis/solicitation is three (3) calendar days prior to the due date.

Proposals must be received electronically at jeri.l.halterman@usace.army.mil. Adobe (.pdf) or Microsoft Word (.doc) are acceptable formats for submitting proposals. The electronic file must be under 8MB total to ensure it can be received by e-mail. If you are having any issues submitting your proposal, please contact Gale L. Rollins as soon as possible.

The Government reserves the right to cancel this combined synopsis/solicitation. Any questions should be sent to Jeri L. Halterman at (816) 389-2198 or at jeri.l.halterman@usace.army.mil.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Season Embankment Mowing Service FY 20

FFP

The contractor shall furnish all personnel, equipment, labor, supplies, and services to mow and trim the areas identified in accordance with the Performance Work Statement (PWS) and elsewhere in the contract.

FOB: Destination

NET AMT

0002 1 Season OPTION Embankment Mowing Services FY 21

FFP

The contractor shall furnish all personnel, equipment, labor, supplies, and services to mow and trim the areas identified in accordance with the Performance Work

0003 1 Season OPTION Embankment Mowing Services FY 22

FFP

The contractor shall furnish all personnel, equipment, labor, supplies, and services to mow and trim the areas as identified in accordance with the Performance Work

0004 1 Season OPTION Embankment Mowing Services FY 23

FFP

The contractor shall furnish all personnel, equipment, labor, supplies, and services to mow and trim the areas identified in accordance with the Performance Work

0005 1 Season OPTION Embankment Mowing Services FY 24

FFP

The contractor shall furnish all personnel, equipment, labor, supplies, and services to mow and trim the areas identified in accordance with the Performance Work

Section C - Descriptions and Specifications

DESCRIPTION AND SPECIFICATIONS

RFORMANCE WORK STATEMENT

EMBAN MENT MOWING AND TRIMMING SERVICES KANOPOLIS LAKE

1. DESCRIPTION OF SERVICES. The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to ensure that mowing and trimming is performed at Kanopolis Lake, Marquette, KS in a manner that will maintain a clean, neat, and professional appearance.

• MOWING AND TRIMMING

General requirements

• Level 3 Areas:

Embankment Areas: Embankment area mowing (approximately 108 acres) include the embankment (dam) back slope, abutments and other adjacent areas. The contractor shall mow the grass in these areas at a height of 3-5 inches. These areas are typically mown 6 times per year. The area path on north end of embankment that is mowed up to Highway 141 fence must target 2 passes with tractor mower (~30’ width). The north service road that goes by rock piles and up to gate near Ave Q must target 1 pass on each side of roadway with tractor mower (~15’ width). Trimming around instrumentation, rock drains and concrete gutters is included. Gutter trimming will include all overhanging vegetation and vegetation growing within the gutter seal joints. Trimming shall be adequate to provide good visibility and safe operation around the instrument. Past experience has shown that this sequence is necessary for the prevention of damage to the instrumentation. The vegetative cover is vital for control of erosion.

Mowing operations shall not cause rutting or otherwise disturb existing turf. The use of tractor drawn rotary mowers is anticipated in order to meet contractual expectations. Standard lawn mowers are proven practical alternatives for trimming and accessing areas with limited mobility. Tractors shall be operated in such a manner as to protect against the sod being torn by the tractor wheels on turns. The contractor is required to report any animal burrows, slides, wet areas or other unusual conditions observed while mowing to the Project Office. The upper embankment requires mowing of steep slopes.

Grass trimmings and all foreign matter to include loose soil will be blown away from concrete collector gutter interiors and also from the drains located along service road. Gutters and drains will be cleaned of all debris following each service.

• ESTIMATED SCHEDULE OF SERVICES

• The following is a tentative schedule. The COR may revise the schedule as necessitated by weather conditions. The contractor shall meet with the COR prior to each mowing season to coordinate scheduled services. The contractor will be paid only for work accomplished and performed in accordance with the PWS. The Government may delay or eliminate scheduled mowing’s because of weather conditions. The contractor will not be paid for mowing’s deleted from the schedule.

Period of Performance. The services shall be performed from 15 April to 31 October for each contract year. Services are anticipated to be called every 3-4 weeks weather permitting with a total not to exceed 6 mowing’s per season.

Hours of Service Periods. Mowing will be conducted weekdays Monday through Friday 7am to 7pm. Work will not be permitted on Saturdays or Sundays unless this restriction is specifically waived y the Contracting Officer or his authorized representative.

Conditions. In the event that weather or other conditions, over which the Contractor has no control, prevent the Contractor from completing an item of work as required , the Contractor shall notify the COR of such conditions as soon as they arise. The Contractor may request a weather time extension.

1.2.2. Annual Coordination Meeting. The contractor shall meet with the COR annually prior to 15 April

(contract start) each year at a mutually agreed time and date.

(1) SERVICE DELIVERY SUMMARY. The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance

Objective PWS Para.

Performance Threshold

Method of Assessment

Remedy

Mow and Trim Level 3 Areas

1.2.1

No more than two (2) errors/customer complaints per order.

100% Inspection per Order

Re-performance shall take place within 24 hours.

Quality Control Plan

4.1

No more than one (1) error per year.

100% Inspection at the outset of the contract award and each option exercise period.

Re-performance

Weekly Coordination Meeting

1.2.2 errors per year.

100% Inspection every week during the service periods.

Re-performance

(2) GOVERNMENT FURNISHED PROPERTY AND SERVICES:

3.1. Not applicable

4. GENERAL INFORMATION

4.1. QUALITY CONTROL PLAN. The contractor shall develop, submit for contracting officer approval, and maintain a quality program to ensure mowing and trimming services are performed in accordance with established standards of practice .The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services.

4.2. QUALITY ASSURANCE. The government will periodically evaluate the contractor’s performance in accordance with the Quality Assurance Surveillance Plan.

4.3. The Contractor shall furnish the COR, a telephone number attended during normal business hours (7:30 am – 4:00pm C.S.T.) to which calls concerning performance or other contractual matters can be placed.

For the purpose of time and date, a message will be deemed delivered to the Contractor, at such time as it is delivered to the number provided by the Contractor.

4.4. Service Orders. The contractor is responsible for maintaining the services areas within the required conditions (3-5 inches & neat even appearance) with or without a service order placed from Government.

The Government holds the right to place service orders as needed to better accommodate the vegetation conditions on site. The services "As Ordered" shall begin no later than 48 hours after receipt of telephone or email order (unless a later date is specified in the order).

4.5. The Contractor is responsible for any damage done to project features or facilities and will be required to repair or replace them to the satisfaction of the Government.

4.6. In the event of unsatisfactory performance of specified work, the Contractor may be requested to re-perform the unsatisfactory services at no additional cost to the Government. Failure of the Contractor to perform the work will result in withholding of payment for the portion(s) of the work not accomplished.

Amounts to be withheld for work not performed or not performed to standard will be determined by prorating the amount of services satisfactorily performed against the amount of services required.

4.7. The Government reserves the right to cause the specified unsatisfactory work to be performed by a third party or Government personnel. The cost incurred thereby will be levied against the Contractor. Any time Government personnel are used because of Contractor's nonperformance, the cost levied against the Contractor will include all direct costs associated with the performance of the specified. Such inefficiencies are determined as the direct cost to the Government for substitution of the Government personnel removed from their normal duties computed on an hourly basis at the applicable wage rate. Government personnel will be used only when time is of the essence and the interests of the Government would not be served by securing a third party to perform the specified work.

4.8. After mowing, areas serviced under this contract shall present a neat, well cared for, evenly mowed appearance, free from any un-mowed strips or streaks.

4.9. GOVERNMENT REMEDIES. The contracting officer shall follow FAR 52.212.4, Contract Terms and Conditions - Commercial Items, for contractor’s failure to perform satisfactory services or failure to correct non-conforming services. In addition, the contractor shall be responsible for the cost of repair/replacement of any damaged dam instrumentation.

4.10. SAFETY. Some of the service areas receive occasional public use. All mowers shall be equipped and maintained with safety chains, discharge-deflection devices, and/or other approved safety devices to prevent accidental damage or injury from objects thrown by mowers. Claims of damage from operation of the Contractor’s equipment shall be settled promptly. When damage occurs from the contractor’s equipment, the contractor shall contact the party sustaining the damage, and project personnel as soon as possible. Tractors and self-propelled mowers are not required to have roll-over protection when operating solely on flat terrain.

However when operating on terrain with a slope of greater than 10 percent, rollover protection is required.

4.11. Any injury, property damage, equipment malfunction or safety hazard observed by the Contractor shall be immediately reported to COR or Project personnel.

4.12. AREA IMPROVEMENTS/ SPECIAL EVENTS. During the course of this contract, the Government reserves the right to permanently install/place additional trees, signs, facilities, equipment, etc. necessary for the maintenance /upgrading of parks and park facilities. The Government may at no additional charge, increase in each park, up to 5%, the number of items around which mowing/trimming is required.

4.13. ACREAGE. All acreages are estimated. The Contractor shall be responsible for determining exact acreage and conditions affecting performance of this work.

4.14. THIS IS A FLOOD CONTROL PROJECT. Occasional retention of floodwaters may inundate portions of the public use areas, other areas, or access roads thereto, being serviced by this contract. In the event that inundation materially affects the scope of work, the Contractor shall be requested to submit a pricing proposal covering the unserviceable or affected portion of his/her work in order that an equitable adjustment to contract price can be negotiated and an adjustment made in accordance with the appropriate contract clause entitled “Changes.” Payment for services not performed as a result of conditions stated above shall be initially withheld until execution of an equitable adjustment can be made by contract modification.

4.15. MOWING IN SEQUENCE. The contractor shall mow and trim the service area in the same sequence as the previous mowing unless approved by the COR.

4.16. SECURITY. The Contractor has the option to install own lock temporarily on entry gate to service area (during contract period only & not to impede with entry access for Government). If this option is used a spare key must be provided to COR. If the Contractor does not choose to provide own lock, coordination with the COR to have gate unlocked prior to start of service must be completed. The Contractor shall open and close gates within the contract boundary areas. The Contractor shall securely lock any gate that is opened by him/her, upon completion of the required work, or upon completion of the workday.

4.17. INSURANCE: The Contractor shall provide and maintain during the entire performance of this contract, at minimum- amounts of insurance required in the below. Before commencing work under this contract, the Contractor shall submit proof of insurance to the Contracting Officer.

The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the government's interest shall not be effective (1) for such period as the laws of the State in which this contract is to be performed prescribe, or (2) until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

The Contractor shall insert the substance of this clause in subcontracts under this contract that required work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors’ proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

THE FOLLOWING SCHEDULE OF INSURANCE IS APPLICABLE

TYPE AMOUNT

Worker's Compensation Coverage complying with applicable State Statute Employer’s Liability Minimum amount of $100,000 Commercial General Liability Minimum amounts of $500,000 per occurrence Commercial Automobile Liability Minimum limits of $200,000 per person, $300,000 per accident for bodily injury, and $20,000 per accident for property damage

NOTE: Coverage required above are minimums. If higher limits of coverage are required by state statute, the Contractor shall be responsible for obtaining such addition coverage. Information regarding State requirements may be obtained by contracting:

KANSAS: Insurance Commissioner, Toll Free, 1-800-432-2484

Division of Workers Compensation, 785-296-3071

5.0 ANTITERRORISM/OPERATION SECURITY REQUIREMENTS

All contractor and all associated sub‐contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

The Contractor must pre‐screen candidates using the E‐verify Program (http://www.dhs.gov/E‐Verify) website to meet the established employment eligibility requirements. The vendor must ensure that the candidate has two valid forms of government issued identification to ensure the correct information is entered into the E‐verify system. An initial list of verified/eligible candidates must be provided to the COR no later than 3 business days after the initial contract award.

Per the E-Verify Website the following exemptions apply:

Employers whose contracts are exempt from the E-Verify federal contractor rule are not required to enroll in E-Verify. A contract is considered exempt if any one of the following applies: (1) It is for fewer than 120 days. (2) It is valued at less than $150,000, the simplified acquisition threshold (Source: http://www.uscis.gov/e-verify/federal-contractors/exemptions-and-exceptions).

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

5. QASP

QUALITY ASSURANCE SURVEILLANCE PLAN

For Mowing Services

Contract Number:

Contract Description:

Contractor’s name: (hereafter referred to as the contractor).

1. PURPOSE.

This Quality Assurance Surveillance Plan (QASP) provides a systematic method to evaluate performance for the stated contract. This QASP explains the following:

What will be monitored.

How monitoring will take place.

Who will conduct the monitoring.

How monitoring efforts and results will be documented.

This QASP does not detail how the contractor accomplishes the work. Rather, the QASP is created with the premise that the contractor is responsible for management and quality control actions to meet the terms of the contract. It is the Government’s responsibility to be objective, fair, and consistent in evaluating performance. In addition, the QASP should recognize that unforeseen and uncontrollable situations may occur.

This QASP is a “living document” and the Government may review and revise it on a regular basis. However, the Government shall coordinate changes with the contractor. Updates shall ensure that the QASP remains a valid, useful, and enforceable document. Copies of the original QASP and revisions shall be provided to the contractor and Government officials implementing surveillance activities.

The following FAR clauses may apply depending on contract type:

52.212-4 – Contract Terms and Conditions – Commercial Items

2. GOVERNMENT ROLES AND RESPONSIBILITIES.

The following personnel shall oversee and coordinate surveillance activities.

a. Contracting Officer (KO) - The KO shall ensure performance of all necessary actions for effective contracting, ensure compliance with the contract terms, and shall safeguard the interests of the United States in the contractual relationship. The KO shall also assure that the contractor receives impartial, fair, and equitable treatment under this contract. The KO is ultimately responsible for the final determination of the adequacy of the contractor’s performance.

Assigned KO:

Organization or Agency: U.S. Army Corps of Engineers – Kansas City District Telephone:

Email:

Project Manager (PM) - The PM acts as an acquisition consultant and serves as liaison between the US Army Corps of Engineers, Kansas City District (CENWK) and the requesting program office, as well as liaison between the CENWK and the supporting contracting office.

Assigned PM: Daniel Hays Telephone: (816) 389-3093 Email: Daniel.W.Hays@usace.army.mil

c. Contracting Officer’s Representative (COR) - The COR is responsible for technical administration of the contract and shall assure proper Government surveillance of the contractor’s performance. The COR shall keep a quality assurance file. At the conclusion of the contract or when requested by the KO, the COR shall provide documentation to the KO. The COR is not empowered to make any contractual commitments or to authorize any contractual changes on the Government’s behalf. The contractor shall refer any changes they deem may affect contract price, terms, or conditions to the KO for action.

Assigned COR: Brandon Beckman Telephone: (816) 389-2239 Email: brandon.l.beckman@usace.army.mil

3. CONTRACTOR REPRESENTATIVES:

The following employees of the contractor serve as the contractor’s Program Manager and Task Manager for this contract.

a. Program Manager:

Telephone:

Email:

4. PERFORMANCE STANDARDS.

Performance standards define desired services. The Government performs surveillance to determine if the contractor exceeds, meets or does not meet these standards.

The Performance Requirements Summary Matrix, paragraph 3 in the Performance Work Statement includes performance standards. The Government shall use these standards to determine contractor performance and shall compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective PWS Para.

Performance Threshold

Method of Assessment

Remedy

Mow and Trim Level 3 Areas

1.2.1 errors/customer complaints per order.

100% Inspection per Order

Re-performance

Quality Control Plan

4.1

No more than one (1) error per year.

100% Inspection at the outset of the contract award and each option exercise period.

Re-performance

Weekly Coordination Meeting

1.2.2 errors per year.

100% Inspection every week during the service periods.

Re-performance

5. METHODS OF QA SURVEILLANCE.

Various methods exist to monitor performance. The COR shall use the surveillance methods listed below in the administration of this QASP.

Regardless of the surveillance method, the COR shall always contact the contractor's task manager or on-site representative when a defect is identified and inform the manager of the specifics of the problem. The COR, with assistance from the PM, shall be responsible for monitoring the contractor’s performance in meeting a specific performance standard/AQL.

a. VALIDATED USER/CUSTOMER COMPLAINTS. (Relies on the user of the service to identify deficiencies.

Complaints are then investigated and validated. Highly applicable to services provided in quantity and where quality is highly subjective.)

PWS 1.1

b. 100% INSPECTION. (Evaluates all outputs. Most applicable to small quantity, but highly important services.

May be used where there are written deliverables and stringent requirements such as tasks required by law, safety, or security.)

PWS 1.1, 1.2 and 4.1.

c. RANDOM SAMPLING. (Designed to evaluate the outputs of the award requirement by randomly selecting and inspecting a statistically significant sample. Highly recommended for large quantity repetitive activities with objective and measurable quality attributes.)

PWS 1.1.

Surveillance results may be used as the basis for actions (to include payment deductions) against the contractor. In such cases, the Inspection of Services clause in the Contract becomes the basis for the KO’s actions.

6. RATINGS.

Metrics and methods are designed to determine if performance exceeds, meets, or does not meet a given standard and acceptable quality level. A rating scale shall be used to determine a positive, neutral, or negative outcome. The following ratings shall be used:

EXCEPTIONAL:

Performance significantly exceeds contract requirements to the Government’s benefit.

SATISFACTORY: Performance meets contractual requirements.

UNSATISFACTORY: Performance does not meet contractual requirements.

7. DOCUMENTING PERFORMANCE.

a. ACCEPTABLE PERFORMANCE (EXCEPTIONAL/SATISFACTORY).

The Government shall document positive performance. A report template is attached. Any report may become a part of the supporting documentation for fixed fee payments, award fee payments, or other actions.

b. UNACCEPTABLE PERFORMANCE (UNSATISFACTORY).

When unacceptable performance occurs, the COR shall inform the contractor. This will normally be in writing unless circumstances necessitate verbal communication. In any case the COR shall document the discussion and place it in the COR file.

When the COR determines formal written communication is required, the COR shall prepare a Contract Discrepancy Report (CDR), and present it to the contractor's task manager or on-site representative. A CDR template is attached to this QASP.

The contractor shall acknowledge receipt of the CDR in writing. The CDR will specify if the contractor is required to prepare a corrective action plan to document how the contractor shall correct the unacceptable performance and avoid a recurrence. The CDR will also state how long after receipt the contractor has to present this corrective action plan to the COR. The Government shall review the contractor's corrective action plan to determine acceptability.

Any CDRs may become a part of the supporting documentation for contract payment deductions, fixed fee deductions, award fee nonpayment, or other actions deemed necessary by the KO.

8. FREQUENCY OF MEASUREMENT.

a. Frequency of Measurement.

During contract/order performance, the COR shall take periodic measurements, as specified in the Performance Standards Summary Matrix, and shall analyze whether the negotiated frequency of measurement is appropriate for the work being performed.

b. Frequency of Performance Assessment Meetings.

The COR shall meet with the contractor to assess performance and shall provide a written assessment.

Prepared by:

Signature – Contracting Officer’s Representative

PERFORMANCE REPORT

1. CONTRACT NUMBER: <insert number>

2. Prepared by: (Name of COR) Brandon Beckman

3. Date and time of observation:

4. Observation:

<Examples of items to include in a report are:

- Method of surveillance.

- How frequently you conducted surveillance.

- Surveillance results.

- Number of observations.> Prepared by: Brandon Beckman

Signature – Contracting Officer’s Representative Date

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 15-APR-2020 TO

31-OCT-2020

N/A KANOPOLIS PROJECT OFC

105 RIVERSIDE DR

MARQUETTE KS 67464

G5R0750

0002 POP 15-APR-2021 TO

31-OCT-2021

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 15-APR-2022 TO

31-OCT-2022

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 15-APR-2023 TO

31-OCT-2023

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 15-APR-2024 TO

31-OCT-2024

N/A (SAME AS PREVIOUS LOCATION)

Section G - Contract Administration Data

WAGE RATES

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.:

2015‐5754 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 12/23/2019

Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas

Area: Kansas Counties of Ellsworth Jewell Lincoln Marion McPherson Mitchell Reno Rice

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE ‐ TITLE FOOTNOTE RATE

01000 ‐ Administrative Support And Clerical Occupations 01011 ‐ Accounting Clerk I 13.26 01012 ‐ Accounting Clerk II 15.89 01013 ‐ Accounting Clerk III 17.75 01020 ‐ Administrative Assistant 20.89 01035 ‐ Court Reporter 24.99 01041 ‐ Customer Service Representative I 11.31 01042 ‐ Customer Service Representative II 12.72 01043 ‐ Customer Service Representative III 13.88 01051 ‐ Data Entry Operator I 13.80 01052 ‐ Data Entry Operator II 15.07 01060 ‐ Dispatcher Motor Vehicle 17.43

01070 ‐ Document Preparation Clerk 14.47 01090 ‐ Duplicating Machine Operator 14.47 01111 ‐ General Clerk I 13.02 01112 ‐ General Clerk II 14.21 01113 ‐ General Clerk III 15.95 01120 ‐ Housing Referral Assistant 18.21 01141 ‐ Messenger Courier 12.89 01191 ‐ Order Clerk I 14.54 01192 ‐ Order Clerk II 15.86 01261 ‐ Personnel Assistant (Employment) I 15.61 01262 ‐ Personnel Assistant (Employment) II 17.47 01263 ‐ Personnel Assistant (Employment) III 19.64 01270 ‐ Production Control Clerk 22.29 01290 ‐ Rental Clerk 15.82 01300 ‐ Scheduler Maintenance 14.60 01311 ‐ Secretary I 14.60 01312 ‐ Secretary II 16.33 01313 ‐ Secretary III 18.21 01320 ‐ Service Order Dispatcher 15.58 01410 ‐ Supply Technician 20.89 01420 ‐ Survey Worker 14.71 01460 ‐ Switchboard Operator/Receptionist 12.33 01531 ‐ Travel Clerk I 13.06 01532 ‐ Travel Clerk II 13.76 01533 ‐ Travel Clerk III 14.82 01611 ‐ Word Processor I 13.35 01612 ‐ Word Processor II 14.99 01613 ‐ Word Processor III 16.77

05000 ‐ Automotive Service Occupations

05005 ‐ Automobile Body Repairer Fiberglass 20.95 05010 ‐ Automotive Electrician 19.91 05040 ‐ Automotive Glass Installer 19.06 05070 ‐ Automotive Worker 19.06 05110 ‐ Mobile Equipment Servicer 16.98 05130 ‐ Motor Equipment Metal Mechanic 20.95 05160 ‐ Motor Equipment Metal Worker 19.06 05190 ‐ Motor Vehicle Mechanic 21.18 05220 ‐ Motor Vehicle Mechanic Helper 15.92 05250 ‐ Motor Vehicle Upholstery Worker 18.02 05280 ‐ Motor Vehicle Wrecker 19.06 05310 ‐ Painter Automotive 19.91 05340 ‐ Radiator Repair Specialist 19.06 05370 ‐ Tire Repairer 15.62 05400 ‐ Transmission Repair Specialist 20.95

07000 ‐ Food Preparation And Service Occupations

07010 ‐ Baker 11.71 07041 ‐ Cook I 11.07 07042 ‐ Cook II 12.61 07070 ‐ Dishwasher 8.83 07130 ‐ Food Service Worker 9.76

07210 ‐ Meat Cutter 13.67 07260 ‐ Waiter/Waitress 8.81

09000 ‐ Furniture Maintenance And Repair Occupations

09010 ‐ Electrostatic Spray Painter 19.62

09040 ‐ Furniture Handler 13.76 09080 ‐ Furniture Refinisher 19.62 09090 ‐ Furniture Refinisher Helper 15.66 09110 ‐ Furniture Repairer Minor 17.54 09130 ‐ Upholsterer 19.62

11000 ‐ General Services And Support Occupations

11030 ‐ Cleaner Vehicles 11.93 11060 ‐ Elevator Operator 11.45 11090 ‐ Gardener 15.21 11122 ‐ Housekeeping Aide 11.45 11150 ‐ Janitor 11.45 11210 ‐ Laborer Grounds Maintenance 12.23 11240 ‐ Maid or Houseman 10.49 11260 ‐ Pruner 11.13 11270 ‐ Tractor Operator 14.18 11330 ‐ Trail Maintenance Worker 12.23 11360 ‐ Window Cleaner 12.62

12000 ‐ Health Occupations

12010 ‐ Ambulance Driver 16.19 12011 ‐ Breath Alcohol Technician 17.23 12012 ‐ Certified Occupational Therapist Assistant 27.28 12015 ‐ Certified Physical Therapist Assistant 26.21 12020 ‐ Dental Assistant 16.02 12025 ‐ Dental Hygienist 34.53 12030 ‐ EKG Technician 24.57 12035 ‐ Electroneurodiagnostic Technologist 24.57 12040 ‐ Emergency Medical Technician 16.19 12071 ‐ Licensed Practical Nurse I 15.40 12072 ‐ Licensed Practical Nurse II 17.23 12073 ‐ Licensed Practical Nurse III 19.20 12100 ‐ Medical Assistant 13.37 12130 ‐ Medical Laboratory Technician 20.46 12160 ‐ Medical Record Clerk 14.84 12190 ‐ Medical Record Technician 16.60 12195 ‐ Medical Transcriptionist 15.89 12210 ‐ Nuclear Medicine Technologist 36.66 12221 ‐ Nursing Assistant I 11.17 12222 ‐ Nursing Assistant II 12.56 12223 ‐ Nursing Assistant III 13.71 12224 ‐ Nursing Assistant IV 15.38 12235 ‐ Optical Dispenser 14.42 12236 ‐ Optical Technician 15.40 12250 ‐ Pharmacy Technician 15.80 12280 ‐ Phlebotomist 13.37 12305 ‐ Radiologic Technologist 24.18 12311 ‐ Registered Nurse I 21.92

12312 ‐ Registered Nurse II 26.82 12313 ‐ Registered Nurse II Specialist 26.82 12314 ‐ Registered Nurse III 32.44 12315 ‐ Registered Nurse III Anesthetist 32.44 12316 ‐ Registered Nurse IV 38.89 12317 ‐ Scheduler (Drug and Alcohol Testing) 21.33

12320 ‐ Substance Abuse Treatment Counselor 20.05 13000 ‐ Information And Arts Occupations

13011 ‐ Exhibits Specialist I 18.36 13012 ‐ Exhibits Specialist II 22.75 13013 ‐ Exhibits Specialist III 27.82 13041 ‐ Illustrator I 18.36 13042 ‐ Illustrator II 22.75 13043 ‐ Illustrator III 27.82 13047 ‐ Librarian 25.19 13050 ‐ Library Aide/Clerk 12.63 13054 ‐ Library Information Technology Systems 21.60 Administrator 13058 ‐ Library Technician 14.53

13061 ‐ Media Specialist I 16.41 13062 ‐ Media Specialist II 18.36 13063 ‐ Media Specialist III 20.47 13071 ‐ Photographer I 16.41 13072 ‐ Photographer II 18.36 13073 ‐ Photographer III 22.75 13074 ‐ Photographer IV 27.82 13075 ‐ Photographer V 33.66 13090 ‐ Technical Order Library Clerk 15.50 13110 ‐ Video Teleconference Technician 16.41

14000 ‐ Information Technology Occupations

14041 ‐ Computer Operator I 17.92 14042 ‐ Computer Operator II 18.33 14043 ‐ Computer Operator III 21.46 14044 ‐ Computer Operator IV 23.01 14045 ‐ Computer Operator V 25.46 14071 ‐ Computer Programmer I (see 1) 22.75 14072 ‐ Computer Programmer II (see 1) 25.78 14073 ‐ Computer Programmer III (see 1)

14074 ‐ Computer Programmer IV (see 1)

14101 ‐ Computer Systems Analyst I (see 1)

14102 ‐ Computer Systems Analyst II (see 1)

14103 ‐ Computer Systems Analyst III (see 1)

14150 ‐ Peripheral Equipment Operator 17.92 14160 ‐ Personal Computer Support Technician 24.04 14170 ‐ System Support Specialist 25.81

15000 ‐ Instructional Occupations

15010 ‐ Aircrew Training Devices Instructor (Non‐Rated) 28.83 15020 ‐ Aircrew Training Devices Instructor (Rated) 34.88 15030 ‐ Air Crew Training Devices Instructor (Pilot) 40.87 15050 ‐ Computer Based Training Specialist / Instructor 28.83

15060 ‐ Educational Technologist 26.09 15070 ‐ Flight Instructor (Pilot) 40.87 15080 ‐ Graphic Artist 21.75 15085 ‐ Maintenance Test Pilot Fixed Jet/Prop 40.87 15086 ‐ Maintenance Test Pilot Rotary Wing 40.87 15088 ‐ Non‐Maintenance Test/Co‐Pilot 40.87 15090 ‐ Technical Instructor 18.76 15095 ‐ Technical Instructor/Course Developer 22.94 15110 ‐ Test Proctor 15.14 15120 ‐ Tutor 15.14

16000 ‐ Laundry Dry‐Cleaning Pressing And Related Occupations

16010 ‐ Assembler 9.56 16030 ‐ Counter Attendant 9.56 16040 ‐ Dry Cleaner 12.08 16070 ‐ Finisher Flatwork Machine 9.56 16090 ‐ Presser Hand 9.56 16110 ‐ Presser Machine Drycleaning 9.56 16130 ‐ Presser Machine Shirts 9.56 16160 ‐ Presser Machine Wearing Apparel Laundry 9.56 16190 ‐ Sewing Machine Operator 12.84 16220 ‐ Tailor 13.60 16250 ‐ Washer Machine 10.39

19000 ‐ Machine Tool Operation And Repair Occupations 19010 ‐ Machine‐Tool Operator (Tool Room) 22.95 19040 ‐ Tool And Die Maker 29.95

21000 ‐ Materials Handling And Packing Occupations

21020 ‐ Forklift Operator 17.26 21030 ‐ Material Coordinator 22.29 21040 ‐ Material Expediter 22.29 21050 ‐ Material Handling Laborer 14.53 21071 ‐ Order Filler 12.00 21080 ‐ Production Line Worker (Food Processing) 17.26 21110 ‐ Shipping Packer 16.69 21130 ‐ Shipping/Receiving Clerk 16.69 21140 ‐ Store Worker I 14.77 21150 ‐ Stock Clerk 19.07 21210 ‐ Tools And Parts Attendant 17.26 21410 ‐ Warehouse Specialist 17.26

23000 ‐ Mechanics And Maintenance And Repair Occupations

23010 ‐ Aerospace Structural Welder 29.78 23019 ‐ Aircraft Logs and Records Technician 24.24 23021 ‐ Aircraft Mechanic I 28.49 23022 ‐ Aircraft Mechanic II 29.78 23023 ‐ Aircraft Mechanic III 30.93 23040 ‐ Aircraft Mechanic Helper 21.06 23050 ‐ Aircraft Painter 27.22 23060 ‐ Aircraft Servicer 24.24 23070 ‐ Aircraft Survival Flight Equipment Technician 27.22 23080 ‐ Aircraft Worker 25.77 23091 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 25.77

I

23092 ‐ Aircrew Life Support Equipment (ALSE) Mechanic 28.49

II

23110 ‐ Appliance Mechanic 21.01 23120 ‐ Bicycle Repairer 17.95 23125 ‐ Cable Splicer 35.25 23130 ‐ Carpenter Maintenance 21.09 23140 ‐ Carpet Layer 20.40 23160 ‐ Electrician Maintenance 23.88 23181 ‐ Electronics Technician Maintenance I 25.48 23182 ‐ Electronics Technician Maintenance II 26.90 23183 ‐ Electronics Technician Maintenance III 30.71 23260 ‐ Fabric Worker 19.27 23290 ‐ Fire Alarm System Mechanic 22.55 23310 ‐ Fire Extinguisher Repairer 17.95

23311 ‐ Fuel Distribution System Mechanic 24.81 23312 ‐ Fuel Distribution System Operator 19.70 23370 ‐ General Maintenance Worker 18.69 23380 ‐ Ground Support Equipment Mechanic 28.49 23381 ‐ Ground Support Equipment Servicer 24.24 23382 ‐ Ground Support Equipment Worker 25.77 23391 ‐ Gunsmith I 17.95 23392 ‐ Gunsmith II 20.51 23393 ‐ Gunsmith III 22.76 23410 ‐ Heating Ventilation And Air‐Conditioning 22.64 Mechanic

23411 ‐ Heating Ventilation And Air Contidioning 23.68 Mechanic (Research Facility)

23430 ‐ Heavy Equipment Mechanic 21.77

23440 ‐ Heavy Equipment Operator 20.58 23460 ‐ Instrument Mechanic 22.76 23465 ‐ Laboratory/Shelter Mechanic 21.71 23470 ‐ Laborer 14.53 23510 ‐ Locksmith 21.71 23530 ‐ Machinery Maintenance Mechanic 22.58 23550 ‐ Machinist Maintenance 20.58 23580 ‐ Maintenance Trades Helper 15.77 23591 ‐ Metrology Technician I 22.76 23592 ‐ Metrology Technician II 23.81 23593 ‐ Metrology Technician III 24.76 23640 ‐ Millwright 22.55 23710 ‐ Office Appliance Repairer 21.55 23760 ‐ Painter Maintenance 18.96 23790 ‐ Pipefitter Maintenance 22.34 23810 ‐ Plumber Maintenance 21.25 23820 ‐ Pneudraulic Systems Mechanic 22.76 23850 ‐ Rigger 22.76 23870 ‐ Scale Mechanic 20.51 23890 ‐ Sheet‐Metal Worker Maintenance 21.95 23910 ‐ Small Engine Mechanic 20.40

23931 ‐ Telecommunications Mechanic I 26.65 23932 ‐ Telecommunications Mechanic II 27.88 23950 ‐ Telephone Lineman 27.14 23960 ‐ Welder Combination Maintenance 19.95

23965 ‐ Well Driller 24.81 23970 ‐ Woodcraft Worker 22.76 23980 ‐ Woodworker 17.95

24000 ‐ Personal Needs Occupations

24550 ‐ Case Manager 16.02 24570 ‐ Child Care Attendant 10.20 24580 ‐ Child Care Center Clerk 12.75 24610 ‐ Chore Aide 10.01 24620 ‐ Family Readiness And Support Services 16.02 Coordinator 24630 ‐ Homemaker

16.25

25000 ‐ Plant And System Operations Occupations

25010 ‐ Boiler Tender 23.45 25040 ‐ Sewage Plant Operator 23.96 25070 ‐ Stationary Engineer 25.22

25190 ‐ Ventilation Equipment Tender 17.14 25210 ‐ Water Treatment Plant Operator 20.86

27000 ‐ Protective Service Occupations

27004 ‐ Alarm Monitor 16.74 27007 ‐ Baggage Inspector 14.15 27008 ‐ Corrections Officer 15.77 27010 ‐ Court Security Officer 17.24 27030 ‐ Detection Dog Handler 17.18 27040 ‐ Detention Officer 15.77 27070 ‐ Firefighter 17.85 27101 ‐ Guard I 14.15 27102 ‐ Guard II 17.18 27131 ‐ Police Officer I 18.90 27132 ‐ Police Officer II 21.00

28000 ‐ Recreation Occupations

28041 ‐ Carnival Equipment Operator 11.55 28042 ‐ Carnival Equipment Repairer 12.46 28043 ‐ Carnival Worker 9.29 28210 ‐ Gate Attendant/Gate Tender 14.32 28310 ‐ Lifeguard 10.82 28350 ‐ Park Attendant (Aide) 16.01 28510 ‐ Recreation Aide/Health Facility Attendant 11.69 28515 ‐ Recreation Specialist 19.85 28630 ‐ Sports Official 12.76 28690 ‐ Swimming Pool Operator 15.81

29000 ‐ Stevedoring/Longshoremen Occupational Services

29010 ‐ Blocker And Bracer 24.15 29020 ‐ Hatch Tender 24.15 29030 ‐ Line Handler 24.15 29041 ‐ Stevedore I 22.73 29042 ‐ Stevedore II 24.52

30000 ‐ Technical Occupations

30010 ‐ Air Traffic Control Specialist Center (HFO) (see 2) 39.09 30011 ‐ Air Traffic Control Specialist Station (HFO) (see 2) 26.95 30012 ‐ Air Traffic Control Specialist Terminal (HFO) (see 2) 29.68 30021 ‐ Archeological Technician I 17.30 30022 ‐ Archeological Technician II 18.90 30023 ‐ Archeological Technician III 23.42 30030 ‐ Cartographic Technician 23.42 30040 ‐ Civil Engineering Technician 19.93 30051 ‐ Cryogenic Technician I 25.94 30052 ‐ Cryogenic Technician II 28.64 30061 ‐ Drafter/CAD Operator I 16.90 30062 ‐ Drafter/CAD Operator II 18.90 30063 ‐ Drafter/CAD Operator III 21.07 30064 ‐ Drafter/CAD Operator IV 25.94 30081 ‐ Engineering Technician I 16.25 30082 ‐ Engineering Technician II 18.25 30083 ‐ Engineering Technician III 22.54 30084 ‐ Engineering Technician IV 24.66 30085 ‐ Engineering Technician V 33.08 30086 ‐ Engineering Technician VI 40.00 30090 ‐ Environmental Technician 22.43

30095 ‐ Evidence Control Specialist 23.42 30210 ‐ Laboratory Technician 20.67 30221 ‐ Latent Fingerprint Technician I 25.94 30222 ‐ Latent Fingerprint Technician II 28.64 30240 ‐ Mathematical Technician 23.48 30361 ‐ Paralegal/Legal Assistant I 18.63 30362 ‐ Paralegal/Legal Assistant II 23.48 30363 ‐ Paralegal/Legal Assistant III 28.72 30364 ‐ Paralegal/Legal Assistant IV 34.16 30375 ‐ Petroleum Supply Specialist 28.64 30390 ‐ Photo‐Optics Technician 23.48 30395 ‐ Radiation Control Technician 28.64 30461 ‐ Technical Writer I 21.97 30462 ‐ Technical Writer II 26.88 30463 ‐ Technical Writer III 32.52 30491 ‐ Unexploded Ordnance (UXO) Technician I 24.85

30492 ‐ Unexploded Ordnance (UXO) Technician II 30.06 30493 ‐ Unexploded Ordnance (UXO) Technician III 36.03 30494 ‐ Unexploded (UXO) Safety Escort 24.85

30495 ‐ Unexploded (UXO) Sweep Personnel 24.85 30501 ‐ Weather Forecaster I 25.94 30502 ‐ Weather Forecaster II 31.54 30620 ‐ Weather Observer Combined Upper Air Or (see 2) 21.07 Surface Programs

30621 ‐ Weather Observer Senior (see 2) 23.42 31000 ‐ Transportation/Mobile Equipment Operation Occupations 31010 ‐ Airplane Pilot 30.06 31020 ‐ Bus Aide 10.85

31030 ‐ Bus Driver 13.88 31043 ‐ Driver Courier 13.30 31260 ‐ Parking and Lot Attendant 12.04 31290 ‐ Shuttle Bus Driver 14.34 31310 ‐ Taxi Driver 11.48 31361 ‐ Truckdriver Light 14.34 31362 ‐ Truckdriver Medium 15.40 31363 ‐ Truckdriver Heavy 19.37 31364 ‐ Truckdriver Tractor‐Trailer 19.37

99000 ‐ Miscellaneous Occupations

99020 ‐ Cabin Safety Specialist 14.66 99030 ‐ Cashier 9.34 99050 ‐ Desk Clerk 9.27 99095 ‐ Embalmer 27.80 99130 ‐ Flight Follower 24.85 99251 ‐ Laboratory Animal Caretaker I 13.13 99252 ‐ Laboratory Animal Caretaker II 13.89 99260 ‐ Marketing Analyst 24.49 99310 ‐ Mortician 27.80 99410 ‐ Pest Controller 20.55 99510 ‐ Photofinishing Worker 14.10 99710 ‐ Recycling Laborer 15.56 99711 ‐ Recycling Specialist 18.44 99730 ‐ Refuse Collector 14.12 99810 ‐ Sales Clerk 11.90 99820 ‐ School Crossing Guard 11.60

99830 ‐ Survey Party Chief 20.36 99831 ‐ Surveying Aide 12.56 99832 ‐ Surveying Technician 17.23 99840 ‐ Vending Machine Attendant 17.71 99841 ‐ Vending Machine Repairer 21.04 99842 ‐ Vending Machine Repairer Helper 17.71

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health‐related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health‐related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *

*This rate is to be used only when compensating employees for performance on an SCA‐ covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R.

541.

400) wage rates may not be listed on this wage determination for all occupations within those job families.