W9128F20Q0002 Amd 02 - Motor Control Centers and Panel Replacement at Ft....pdf

W59XQG93258695

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Fort Randall Dam, Replace MCCs and Panelboards

The purpose of this amendment is to add and/or remove requirements in the specifications as identif ied in Summary of Changes. The due date has been extended to 28 May 2020 by 2:00 PM CT.

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 15-May-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W9128F20Q0002

X 9B. DATED (SEE ITEM 11)

17-Apr-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-May-2020

CODE

U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST

CONTRACTING OFFICE

1616 CAPITOL AVENUE

OMAHA NE 68102-4901

W9128F 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9128F20Q0002

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 19-May-2020 02:00 PM to 28-May-2020 02:00 PM.

The following have been added by full text:

SUMMARY OF CHANGES

Specification Section 26 28 00.00.10, Paragraph 2.7.2.2 Vertical Bus:

Delete:

MCC 1-8 600 amperes.

MCC 9-12 600 amperes.

MCC 15-17 600 amperes.

MCC 21-24 600 amperes.

MCC 26 800 amperes.

MCC 28 800 amperes.

MCC 50 800 amperes.

Insert:

MCC 1-8 300 amperes.

MCC 9-12 300 amperes.

MCC 15-17 300 amperes.

MCC 21-24 300 amperes.

MCC 26 600 amperes.

MCC 28 600 amperes.

MCC 50 600 amperes.

Specification Section 26 28 00.00.10, Paragraph 2.7.3 Plug-In Units:

Delete:

"For plug-in units containing a circuit breaker a rotary handle shall be installed on the outside of the hinged door with an interlocking system; flange-type operators shall not be acceptable."

Insert:

"For plug-in units containing a circuit breaker, a flange-type operator shall be installed on the outside of the hinged door with an interlocking system."

Specification Section 26 28 00.00.10, Paragraph 2.7.2 Buses:

Delete:

"All buses shall be of copper and shall be silver-plated throughout."

Insert:

"All buses shall be of copper and shall be tin-plated throughout."

W9128F20Q0002

Specification Section 26 28 00.00.10, Paragraph 2.9 ADDITIONAL CIRCUITS REQUIRED IN MCCs:

Delete:

"3P, 20AT" in 20 places.

Insert:

"2P, 20AT" in 20 places.

Specification Section 26 28 00.00.10, Paragraph 2.7.4 Withdrawable Units:

Delete:

"Opening of the unit door to remove the unit shall not be necessary."

Specification Section 26 28 00.00.10, Paragraph 2.7.4 Withdrawable Units:

Delete:

"Withdrawable units shall be equipped with a guiding wheel on the bottom of each unit used for mechanical interlocking."

Delete:

"Steel wheels shall be provided on the shelf located beneath the unit. These wheels shall allow ease of installation and removal of the unit."

Specification Section 26 28 00.00.10, Paragraph 2.7.8 Distribution Transformers:

Delete:

"Transformers shall be drawout type."

(End of Summary of Changes)