W9128F-17-R-0050,_Amd_0002.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Amendment No. 0002

Install Spillway Gate Wire Rope, Big Bend Dam, SD.

See attached documentation for content of the amendment revisions

NEW Date for receipt of Proposals is 06 July 2017 at 2:00 pm

Government Point of Contact: Kevin Thomsen, Contract Specialist (402) 995-2919

U.S ARMY CORPS OF ENGINEERS, OMAHA DISTRICT

CONTRACTING OFFICE

1616 CAPITOL AVE.

OMAHA, NE 68102-4901

See Item 6

W9128F-17-R-0050

06/23/2017

05/25/2017

06/23/2017

Am #0002 - 2 (Continuation SF 30)

DEPARTMENT OF THE ARMY

Omaha District, Corps of Engineers 1616 Capitol Avenue Omaha, Nebraska 68102-4901

:NOTICE: Failure to acknowledge : Solicitation No. W9128F 17 R 0050 :all amendments may cause rejec- :

:tion of the offer. See FAR : Date of Issue: 25 May 2017 :52.215-1 of Section 00 21 00 : New Date of Receiving Proposals:

06 July 2017

Amendment No. 0002 23 June 2017

SUBJECT: Amendment No. 0002 to Request for Proposal Solicitation Package for Construction of Install Spillway Gate Wire Rope, Big Bend Dam, SD.

Solicitation No. W9128F 17 R 0050.

TO: Prospective Offerors and Others Concerned

1. The specifications and drawings for subject project are hereby modified as follows (revise all specification indices, attachment lists, and drawing indices accordingly).

a. Specifications. (Descriptive Changes.)

(1) Section 00 10 00 -1 (SF1442), delete date and time of receiving proposals shown and substitute "06 July 2017" at "2:00 pm".

(2) Section 09 97 02 Page 3, delete Part 1 GENERAL, and substitute the following: “Coat the outer drum discs, coat the outer circumferential surfaces of the hoist drum discs and coat 16 shaft ends with moisture cured urethane. Refer to photos, contract drawings G-108 & G-109 for drum disc and drum hub sizes details. There are a total of 80 drum discs to be partially painted. The hoist drum discs contain lead based paint which require appropriate lead paint containment and disposal measures to be followed during the removal process. Discs can either be coated on the spillway piers or at another location at the discretion of the contractor. Do not coat the hub. Do not coat the milled surfaces. Do not coat any areas where wire rope bears on metal surfaces. Mask off and protect the (machined milled areas). Basically remove and recoat what is currently coated yellow on the drum discs and shaft.

All coating work shall be conducted with the wire rope off.”

(3) Section 09 97 02 Page 16, paragraph 3.5 PAINTING SCHEDULE, delete “There are a total of 80 drum discs and 16 drum hubs to be painted.

Refer to drawings G-108 & G-109 for item sizes and details.” And substitute “There are a total of 80 drum discs and 16 shaft ends to be painted. Coat all outer portions of the hoist drum discs, coat all the outer circumferential surfaces of the hoist drum disc. Basically remove and recoat what is currently coated yellow on the hoist discs. Refer to photos, drawings G-108 & G-109 for item sizes and details.”

2. This amendment is a part of the proposing papers and its receipt shall be acknowledged on the Standard Form 1442. All other conditions and requirements of the request for proposal remain unchanged. If the proposals have been

Am #0002 - 3 (Continuation SF 30) mailed prior to receiving this amendment, you will notify the office where proposals are received, in the specified manner, immediately of its receipt and of any changes in your proposal occasioned thereby.

a. Hand-Carried Proposals shall be delivered to the U.S. Army Corps of Engineers, Omaha District, Contracting Division, 1616 Capitol Avenue, Omaha, Nebraska 68102-4901.

b. Mailed Proposals shall be addressed as noted in Item 8 on Page 00 10 00-1 of Standard Form 1442.

3. Offers will be received until 2:00 p.m., local time at place of receiving proposals, 06 July 2017.

U.S. Army Corps of Engineers, Omaha District 1616 Capitol Avenue Omaha, Nebraska 68102-4901

23 Jun 2017

MFS/2184