A.01.30_PWS_Exhibits_IDIQ_2018.pdf

C.7 Exhibits

EXHIBIT A

Government Furnished Items

Navigational Aid Materials Minimum Specifications

Regulatory Buoys – Slow No Wake, No Boats, and Hazard

1. 9 inch diameter

2. White, high density polyethylene shell

3. 160 nominal side wall, flat top cap and bottom recessed cap

4. Overall height of 59 inches

5. White, vinyl wrapper with 2 inch orange bottom band, orange symbols and black letters all imprinted on wrapper according to the U.S. Aids to Navigation System. No decals allowed.

6. 3 inch orange reflective top band

7. Completely urethane foam filled

8. ½ inch galvanized mooring eye at bottom w/ 1 inch diameter

9. 36 inch exposure above water surface with 5 lbs. anchor tackle

10. Internal concrete ballast self righting without mooring tackle

11. Mooring eye recessed in bottom cap

12. Weight – 56 lbs.

13. Submerged Buoyancy – 84 lbs.

Float Collar Can Buoys – Slow No Wake, No Boats, and Hazard

1. ABEX 800 hi impact ABS, white #8319/GX3800 exterior shell

2. 14 inch diameter X 30 inch high can, 28 inch diameter X 12 inch high float collar

3. Internal concrete ballast self righting without mooring tackle

4. Overall height of 49 inches

5. Completely filled with polyurethane foam

6. ½ inch galvanized eyebolt thru with a 3 inch diameter galvanized mooring eye at bottom

7. White, vinyl wrapper with 2 inch orange bottom band, orange symbols and black letters all imprinted on wrapper according to the U.S. Aids to Navigation System. No decals allowed.

8. 3 inch orange reflective top band

9. 36 inch exposure above water surface with 29 lbs. anchor tackle

10. Weight – 135 lbs.

11. Submerged Buoyancy – 320 lbs.

Barrier Floats

1. 18 inch diameter x 30 inches long

2. Orange in color

3. LMDP w/ uvi shell

4. .140 nominal wall thickness

5. Completely urethane foam filled

6. 5/8 inch steel rod through w/ 3 7/8” x 3/16” thick galvanized steel washer and hot dipped galvanized 1/2” bail swivel eye each end or 1” Sch 40 HDG pipe through w/ 3” OD galv.

Washer on each end.

7. 28 lbs

8. Sub. Buoyancy – 200 lbs.

Miscellaneous Supplies

1. Wire Rope. Wire rope shall be stainless steel 3/8-inch diameter #304 7 X 19 IWRC. Wire rope used for swim beach systems and individual buoys shall be continuous runs with no splices.

2. Wire Rope Cable Clamps and Wire Rope Thimbles. Wire rope cable clamps (#316) and thimbles

(#304) shall be 3/8-inch stainless steel.

Exhibit B

Note: Measurement of materials (wire rope, clamps, thimbles, etc.) in diagrams is not accurate.

Material specifications listed in the EXHIBIT A, Contractor Furnished Items, Navigational Aid

Materials Specifications are to be used in all services for this contract.