SOW_FLIR_Camera_.docx

STATEMENT OF WORK (SOW)

FOR

FLIR Thermal Camera Repair Services

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform FLIR Thermal Camera Repair Services, as defined in this PWS.

1.2 Background: FLIR Thermal Cameras are used on multiple Live Fire Ranges located at Camp Shelby, MS. FLIR Thermal Camera Systems on occasions have mechanical or electrical failures. Once system failures have occurred it is imperative the systems be repaired and returned to the respective Ranges for utilization as to not impede training.

1.3 This is a onetime repair and service to bring FLIR Thermal Camera Systems and components back up to Original Equipment Manufacturer (OEM) Standard

1.4 Special Qualifications: Contractors must ensure that any personnel performing under a contract are fully trained, certified and qualified to provide services.

2.0 Requirements: The contractor shall:

2.1 System 1: For THV3000MS (Part Number GM-THV2000/3000) Serial Number: 3131008. Replace SONY FCB-EX1020 NTSC (Part Number G009557/001). Perform general maintenance and complete a total functions test on the system. All replacement parts should be OEM.

2.2 System 2: For THV3000MS (Part Number GM-THV2000/3000) Serial Number: 3131011. Replace SONY FCB-EX1020 NTSC (Part Number G009557/001). Replace cable set joystick (Part Number 194647). Replace system cable 15m, Sentry/MS (Part Number 1196215/150).Perform general maintenance and complete a total functions test on the system. All replacement parts should be OEM.

2.3 JPC-3 (Part Number NS401-JPC-2V-1): Quantity 3, Serial Numbers 200000004, 200000008, and 200000006. Perform total functions test and general maintenance. Perform repair actions if needed.

2.4 Freight and Delivery should be included to:

Camp Shelby Range Control Building 5200 Grapevine Road Camp Shelby, MS 39402

2.5 Contractor Manpower Reporting Application (CMRA):

2.5.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Camp Shelby Range Control via a secure data collection site.

2.5.2 The contractor shall completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2019. Contractors may direct questions to the help desk at http://www.ecmra.mil.

Ver. May 2018