Specifications.docx

Specifications Mobile Shelving Unit

1. Beam rows must have an adjustable height and have a minimum of 5 rows per carrier.

2. 1200lb to 1500lb weight capacity per section with minimum of 4 sections per row (per carrier).

3. Must have floor decking per aisle for members to walk between carriers to pull items.

4. Shelves must be able to fit within specifications below:

a. Minimum height 151” and maximum height 160”

b. Minimum width 840” and maximum width 881”

c. Minimum depth 360” and maximum depth 365”

d. Dimensions above are the dimensions for the whole unit.

5. Voltage must be 115 and hooks in the middle to a “disconnect” from main power.

6. Shelving must have capability to have 2 carriers open at the same time.

7. All materials must be metal (aside from floor decking).

8. System must be automated and ran electrically. Hand cranks can be included as a backup source to move bays, but are not required.

9. Safety features must be included to ensure operations of unit will not allow for machine to close while people are in aisles.

Attached drawings have a top view guideline of something we are looking to acquire. These drawings are very vague and are to be used for measurements only. The only stationary carrier will need to be in the middle of the unit and have 7 carriers on each side of the stationary carrier. Power supply will need to be ran to the middle stationary carrier.

This solicitation is for a brand name or equal product. To be considered equal, product must meet the technical requirements above.