SSA_-__Vertical_Storage_Specifications.pdf

REQUIREMENTS AND TECHNICAL DATA

1108th TASMG MMD is requesting to purchase a Vertical Storage Lift for the Supply Support Activity (SSA). The 1108th TASMG currently has one Hanel Lean Lift Vertical Storage unit on site and is utilized daily. The SSA will use this new Vertical Storage Lift to ensure accountability of bench stock items and provide the necessary space to store new incoming bench stock items. The new Vertical Storage Lift must be compatible with the current Hanel Lean Lift on site.

Vertical Storage Lift

Minimum Requirements o Unit Dimensions:

Height 192.50” / 16.04 Width 141” / 11.75’ Depth 136” / 11.40’ Work Surface Height 35” Access Opening Clear Height 28.74” o Pan Requirements:

Spacing:2.95” Dimensions:

128.35”W x 40.74”D Material:

Galvanized Un-slotted

Pans per Unit:

Required range 64 to 70

Capacity:

Required range 662 Lbs. each o Unit Payload Capacity:

Required range 88,000Lbs.

o Access Door:

Must be locking security door o Controller:

Attached to unit Must offer connectivity to local network Full-color touch-screen control Must have real-time data browser Must be compatible with the following:

Barcode reader ID badge reader Quantity scales Printer

Must provide enhanced inventory management modules o Electrical Requirements:

480 Volt, 3 Phase o Lighting:

Fluorescent inside access o Safety Requirements:

Chain lock device Emergency stop button Safety bypass

Must allow unit to remain fully operational, regardless if a safety system fails

Extra safety bypass Backup system must check for all safeties to include but not limited to:

o Height sensors o Positioning o Memory o Warranty:

1 year minimum Must include Parts and Labor o Certifications:

Must be ISO 9001 Certified