CONTRACT_-_Signed.pdf

0010747723

1. Bidders must complete and return the SF 1442 Front and Back (2 pages), Section B (Bid Price Schedule), and Section K (Reps and Certs) by date/time specified in Block 13A of the SF 1442. FAX w ill not be accepted.

2. Bidder must acknow ledge receipt of all amendments by giving number and date as required in block 19.

3. Bids and bid amendments shall be submitted in sealed envelopes or packages and show solicitation number, date, and time of closing on outside of the envelope. Please enter your CAGE code, Tax ID (TIN) & DUNS in Block 14 of Page 2.

4. The project is set aside for 8(a) 100% Small Business.

5.The Magnitude of this project is betw een $5,000,000.00 and $10,000,000.00

6. Hard Copy of the bid and electronic copy on CD shall be hand delivered or mailed to the address in Block 7. The envelope shall be marked IAW FAR Clause 52.214-5 and ATTN Sebrena M. Butler/Mary L. Hightow er. Solicitation number also goes on the outside of the envelope.

7. Contractors must be registered in the Central Contractor Registration Database now know n as System for Aw ard Management (SAM.gov) under NAICS Code 238330. See FAR 52.204-7 and FAR 52.204-8.

8. Site Visit - See Section L 52.236-27 > 14 June 2016

9. All bonds SHALL be on original documents w ith appropriate seals and signatures.

X

SEBRENA M. BUTLER (912)767-9033

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

27-Sep-2016

(RFP)

(IFB)

CALL:

IDIQ FLOORING

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________365 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________27 Jul 2016 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All of fers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______60 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

W9124M-16-D-0009

7. ISSUED BY CODE

MISSION & INSTALLATION CONTRACTING CMND

MICC-FORT STEWART

ATTN: SEBRENA M. BUTLER

976 WILLIAM H WILSON AVE STE 100 (BUILDING 62

FORT STEWART GA 31314-3425

W9124M

PAGE OF PAGES

1 OF

CODE W9124M

(Title, identifying no., date):

12B. CALENDAR DAYS

02:00 PM (hour) Sealed envelopes containing offers

MISSION & INSTALLATION CONTRACTING CMND

MICC-FORT STEWART

976 WILLIAM H WILSON AVE SUITE 100

FORT STEWART GA 31314-3425

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

WG-254-5J

8. ADDRESS OFFER TO (If Other Than Item 7)

(912)767-0829FAX:TEL: (912)767-9033 TEL: (912)767-8420 FAX: (912)767-2966

W9124M-16-B-0006-0003 167

See Item 7

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE

54XS7

FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specified below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

SEE SCHEDULE

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

$4,110,478.50

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE HQ049027. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

DFAS-INDY VP GFEBS

8899 E 56TH STREET

INDIANAPOLIS IN 46249-3800

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR

CONSTRUCTIVE INGENUITY, LLC

SARA SILVIO

646 KENTUCKY ST BLDG B

SCOTTDALE GA 30079-1134

15. TELEPHONE NO. (Include area code) 404-539-2199

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print) MARY L. HIGHTOWER / CONTRACTING OFFICER

TEL: (912)767-2448 EMAIL: mary.l.hightower2.civ@mail.mil

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY 27-Sep-2016

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

Section SF 30 - BLOCK 14 CONTINUATION PAGE

SPECIAL NOTES

BID PRICE SCHEDULE CHANGES

Line Item 0001 ER = $0.00 - Verbiage not to Exceed $300,000 is deleted.

Line Item 1001 ER = $0.00 - Verbiage not to Exceed $300,000 is deleted.

Line Item 2001 ER= $0.00 - Verbiage not to Exceed $300,000 is deleted.

SITE VISIT QUESTIONS

Questions and Answers from Site Visit dated 14 June 2016

Question 1: What percentage (%) of the work is at Savannah (Hunter Army Airfield)?

*The government does not know what percentage of work will be at HAAF until the requirement is needed.

Extract:

1.8. Location: The site of the proposed work is on the Fort Stewart Military Installation and Hunter Army Airfield, Savannah Georgia.

Question 2: Will there be one COR responsible for both locations Fort Stewart, GA and Hunter Army Airfield or will there be two (2) CORs, one at each location?

* The COR that is assigned to your project will cover work both FS and HAAF.

Extract:

1.7. CONTRACTOR STORAGE YARD POLICY

1.7.1. Submit to the contracting Officer Representative (COR) a detailed sketch depicting the location and view of all facilities placed on, and all improvements to be made to, a storage site; obtain written approval from the Directorate of Public Works (DPW) prior to placing any facilities on or making any improvement to the site; and bear all expenses associated with establishing and maintaining the site.

Question 3: Will the customer/government always select the color or pattern in the event a change is requested/approved by COR?

* The Contractor will submit a submittal of colors or patterns for approval. The government will select color or pattern based on end user’s choice.

Extract:

3.2.2.2.4. Non-Metallic Carpet Edge Guard (MOLDING): Extruded or molded heavy duty vinyl or rubber carpet edge guard of size and profile indicated; minimum two (2) inch wide anchorage flange; colors selected by Contracting Officer from manufacturer’s standard range of colors.

3.3.2.11. COLOR Color shall be as selected.

3.5.2.3. RUBBER FLOORING SHALL BE MATTS INC. OR IRON COMPANY OR

EQUAL. COLOR, SIZE AND THICKNESS WILL BE DECIDED BY THE USER.

3.2.2.2.8. Vinyl carpet edge strips shall be heavy duty and designed for the type of carpet being installed. Floor flange shall be a minimum 2” wide. Colors shall be chosen by the Government from manufacturer’s standards.

3.4.2.1.2. Quarry Tile

Quarry tile and trim shall be unglazed with smooth or abrasive surface. Tile shall be 6 x 6 x 1/2 inch.

Color selection shall be as selected.

3.4.2.1.3. Glazed Wall Tile with backer board

Glazed wall tile and trim shall be cushion edged with bright matte or glaze. Tile shall be 4-1/4 x 4-1/4 or 4-1/4 x 6 or 6 x 6 inches. Color shall be as selected.

Question 4: Are the extra stock materials such as 2 unopened gallons of coating and color a requirement at bid submittal (12 July 2016) or at the task order level?

*Task Order Level Extract:

3.10.1.2 SUBMITTALS

A. Product Data: Submit manufacturer's product data and installation instructions for each material and product used.

B. Samples: Submit two representative samples of each material specified indicating visual characteristics and finish. Include range samples if variation of finish is anticipated.

C. Extra Stock: Provide 2 unopened gallons of each coating and color used in the project.

Question 5: Will the contract require a full time Superintendent & a separate person for Quality Control or can the Superintendent be both? Same question for Safety Officer?

* No, Code requires that they be two separate individuals.

Question 6: Can the assigned Superintendent Supervise multiple task orders at the same time or should a Superintendent be provided for each task order?

*Yes, they can be allowed to supervise multiple task orders, however; it is preferred for QA / QC purposes that they be two separate individuals

Question 7: It was mentioned at the Site Visit meeting that all task orders under 150K do not require a bond, please confirm this is the case?

*Yes, Task Orders that are under the Simplified Acquisition Threshold of $150,000 will NOT require bonds.

Question 8: Will the base / facility provide hazmat surveys for all existing flooring that will require removing or will it be the contractor’s responsibility to perform any abatement testing required?

* The government will provide all documents (hazmat surveys) that show that asbestos is in the facility and direct you to remove.

Question 9: Will a separate APP / Health & Safety Plan / QC Plan be required for each task or can the contractor submit one round of plans in the beginning for all task orders?

*Yes, but an Activity Hazzard Analysis (AHA) is required for Task Orders that has unique requirements that are not in the Safety Plan. The government will provide direction if this is the case.

Question 10: The pricing schedule provided has an NPP Line Item in it, please advise how to total this item into final proposal number?

*The Non-Pre-Priced line ltem #0001ER, 1001ER, and 2001ER = ZERO Disregard the $300,000 price as the solicitation is modified to delete the verbiage that states (Not to exceed $300,000.00) Question 11: It was stated that the bid date would be changed, please confirm date and time.

*Yes, the Bid Opening date will be changed.

Question 12: Will you be adding DB wage rates for ASBESTOS WORKER and FLOOR LAYER (Carpet, Vinyl and Resilient Flooring) even though they are not listed in the DB rates for the counties included in your RFP?

* There is a possibility that there will be Asbestos Work. If so, we would have to do a conformance to the Labor Department for them to add the wage if not listed. MICC does not add wages to the wage determination.

Common or General Laborer on the wage determination sheet covers wages that are not specifically listed or is not specialty work. If you are unsure of what wages to charge in reference to the Wage Determination Sheet, contact the Department of Labor Wage and Hour Division @ 1-866-487-9243 or visit www.wagehour.dol.gov for more information.

Question 13: Can you clarify whether the line item:

1001ER non pre-priced items (not to exceed 300,000.00) 1 LS should be included as a lump sum in the contract total for the base year, and should it be $300,000?

If so, should we make it $300,000 X (% increase) for option years 1 & 2?

* Do not put any price amount there. This is unknown. Please see Question 10.

Question 14: I have a question regarding the total value of the contract. If the magnitude of the project is between $5,000,000.00 and $10,000,000.00; is this for the one year base contract? or Is the $5,000,000 to $10,000,000 for the entire life of the contract which includes the optional 2 years?

* The life of the contract with options

Section A - Solicitation/Contract Form

NOTICE TO BIDDERS

1. Visitors that do not have a DoD issued identification card (Commond Access Card, Military ID, Military Dependent ID, or Automated Installation Entry Card) must visit the Visitor Control Center at Gate One. Visitors are required to provide proof of vehicle registration, proof of insurance, driver’s license and agree to a background check in order to receive a visitor’s pass. The process takes approximately 10 minutes per person. Further information about accesing Fort Stewart and Hunter Army Airfield can be found at the below web address.

http://www.stewart.army.mil/info/?id=463

2. Specific information regarding visitors access, background checks, and contact information can be found at the below web address.

http://www.stewart.army.mil/info/?id=391

3. Directions to Fort Stewart can be found at the below web address.

http://www.stewart.army.mil/info/?id=464&p=1

4. Contractors performing work on Fort Stewart for an extended period of time may request Automated Installation Entry Card to avoid the standard background check for those without a DoD issued identification card. Further information regarding the AIE card can be found at the below web address.

http://www.stewart.army.mil/info/?id=463&p=0

5. All commercial trucks weighing 5-tons or greater, must use the dedicated truck inspection point at the 15th Street Access Control Point (Gate 7/7C). Further information regarding commercial truck access can be found at the below web address.

http://www.stewart.army.mil/info/?id=463&p=0

6. For further information regarding access to Fort Stewart or Hunter Army Airfield or to obtain an AIE card please call the following numbers. Please visit the web addresses above before calling.

Fort Stewart: 912-767-9593 Hunter Army Airfield: 912-315-6121

JOINT VENTURES

*Joint Venture Agreements - Joint Ventures are allowable on competitive 8(a) set asides;

however, the joint venture agreement package or email notification of bid submittal by the joint venture must be received by SBA prior to proposal due date and the joint venture agreement must be approved before award of any resulting contract. If you are comtemplating a joint venture on this project, you must advise your assigned SBA Business Opportuntity Specialist (BOS) as soon as possible. It is also recommended that agreement be submitted as soon as practicable to ensure compliance with establied regulations.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1,298,355 Job $1.00 $1,298,355.00

IDIQ Flooring - Base Year

FFP

27 Sep 2016 - 26 Sep 2017

The work covered by this contract consists of furnishing all plant, labor, materials and performing all operations required in connection with Removal / Installation of floor covering, complete in strict accordance with specifications subject to the terms and conditions of the contract and as ordered by the Contracting Officer.

FOB: Destination

PURCHASE REQUEST NUMBER: 0010747723

NET AMT $1,298,355.00

0002 1 Job NSP

Contract Manpower Reporting - Base Year

FFP

27 Sep 2016 - 26 Sep 2017 - Non Priced

The contractor will report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of the Army via a secure data collection site.

NET AMT

1001 1,372,790.50 Job $1.00 $1,372,790.50

IDIQ Flooring - First Option Year

FFP

27 Sep 2017 - 26 Sep 2018

The work covered by this contract consists of furnishing all plant, labor, materials and performing all operations required in connection with Removal / Installation of floor covering, complete in strict accordance with specifications subject to the terms and conditions of the contract and as ordered by the Contracting Officer.

NET AMT $1,372,790.50

1002 1 Job NSP

Contract Manpower Reporting - First Year

FFP

27 Sep 2017 - 26 Sep 2018 - First Option Year - Non Priced

The contractor will report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of the Army via a secure data collection site.

2001 1,439,333 Job $1.00 $1,439,333.00

IDIQ Flooring - Second Option Year

FFP

27 Sep 2018 - 26 Sep 2019

The work covered by this contract consists of furnishing all plant, labor, materials and performing all operations required in connection with Removal / Installation of floor covering, complete in strict accordance with specifications subject to the terms and conditions of the contract and as ordered by the Contracting Officer.

NET AMT $1,439,333.00

2002 1 Job NSP

Contract Manpower Reporting - Second Yr

FFP

27 Sep 2018 - 26 Sep 2019 - Second Option Year - Non Priced

IDIQ Flooring The contractor will report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of the Army via a secure data collection site.

PRICING NOTES TO BIDDERS

1. Bid Guarantee in the amount of 20% of the total bid for the base year.

2. Contract line items are lump sum amounts based on total of bid price schedule’s individual items. Contractor will calculate subtotals for period of performance, and Grand total for base and all options.

3. Performance and Payment bonds shall be 100% of the original contract price as defined in

FAR Clause 52.228-15 the basic contract is the penal sum for the specified minimum guarantee.

4. Payment and Performance Bonds shall be required at the Task Order level the penal sum shall be 100% of the task order price.

5. Non-prepriced items are items which are not covered by the Bid Price Schedule but are within the scope and general intent of the contract. Prices for these items shall be negotiated between the Contractor and Contracting Officer prior to issuance of any Task Order. These items shall be identified separately in the Contractor’s proposal and resultant Task Order. Maximum amount of non-prepriced items shall not exceed fifteen (15) percent of the total Task Order.

6. There is a minimum guarantee of $25,000.00 for the Base Year Only. The amount may be satisfied through the issuance of Task Orders.

7. Bidder MUST submit a Disc of the Bid Price Schedule on an Excel Spreadsheet.

BID PRICE SCHEDULE

BASE

YEAR

Item DESCRIPTION QUANTITY UNIT OF

ISSUE

U/P AMOUNT

0001AA Provide & install carpet, loop 28 oz 2100 SY $ 25.00 $ 52,500.00 0001AB Remove existing loop or cut pile carpet 3100 SY $ 3.00 $ 9,300.00 0001AC provide & install carpet, cut pile 30 oz 1000 SY $ 10.00 $ 10,000.00 0001AD provide & install loop modular tile carpet (24 x24, 26 oz) 4000 SY $ 31.00 $ 124,000.00 0001AE provide & install loop modular tile entrance carpet (24x24, 42 oz.) 100 SY $ 5.00 $ 500.00 0001AF remove existing modular tile carpet 4100 SY $ 0.50 $ 2,050.00 0001AG remove existing padding(cushion) 1000 SY $ 0.10 $ 100.00 0001AH remove existing laminate flooring 25000 SF $ 0.10 $ 2,500.00 0001AJ provide & install commercial laminate flooring 25000 SF $ 5.60 $ 140,000.00 0001AK provide & install new padding (cushion) bonded urethane, 6.5 lbs 600 SY $ 1.00 $ 600.00 0001AL remove wood quarter round 3000 LF $ 0.10 $ 300.00 0001AM remove wood base 3000 LF $ 0.10 $ 300.00 0001AN provide & install wood base molding 3000 LF $ 0.50 $ 1,500.00 0001AP provide & install quarter round molding 3000 LF $ 1.00 $ 3,000.00 0001AQ remove edge strip (molding) 1400 LF $ 1.00 $ 1,400.00 0001AR provide & install metal edge strip(molding) 700 LF $ 3.00 $ 2,100.00 0001AS provide & install vinyl edge strip(molding) 700 LF $ 1.00 $ 700.00 0001AT remove floor door stops 50 EACH $ 1.00 $ 50.00 0001AU provide & install floor door stops 50 EACH $ 2.00 $ 100.00 0001AV provide & install skim coat on floor 10000 SY $ 3.00 $ 30,000.00 0001AW provide & install leveling coat on floor 2000 SY $ 1.00 $ 2,000.00 0001AX remove tackless strip 1500 LF $ 0.10 $ 150.00 0001AY provide & install tackless strip 1500 LF $ 0.10 $ 150.00 0001AZ remove composition tile 40000 SF $ 2.00 $ 80,000.00 0001BA provide & install composition tile (12x12x1/8) 40000 SF $ 4.00 $ 160,000.00 0001BB remove rolled sheet vinyl flooring 9000 SF $ 0.50 $ 4,500.00 0001BC provide & install rolled sheet vinyl flooring with backing 4500 SF $ 4.00 $ 18,000.00 0001BD provide & install rolled sheet vinyl flooring without backing 4500 SF $ 5.60 $ 25,200.00 0001BE remove resilient base 4" 10000 LF $ 1.00 $ 10,000.00 0001BF remove resilient base 6" 5000 LF $ 0.10 $ 500.00 0001BG provide & install resilient base 4" 10000 LF $ 3.66 $ 36,600.00 0001BH provide & install resilient base 6" 5000 LF $ 3.76 $ 18,800.00 0001BJ remove conductive resilient flooring 1000 SF $ 0.30 $ 300.00 0001BK remove ceramic / porcelain flooring 4000 SF $ 0.40 $ 1,600.00 0001BL provide & install porcelain flooring 12' x 12" 2000 SF $ 2.00 $ 4,000.00 0001BM provide & install porcelain flooring 12" x 12" non-slip 2000 SF $ 2.00 $ 4,000.00 0001BN provide & install conductive resilent flooring 1000 SF $ 1.00 $ 1,000.00 0001BP remove composition rubber/vinyl, nosing, treads 1000 LF $ 0.20 $ 200.00 0001BQ provide & install one-piece nosing/tread composition (rubber) 400 LF $ 1.00 $ 400.00 0001BR provide & install one-piece nosing/tread composition(vinyl) 400 LF $ 1.00 $ 400.00 0001BS provide & install two piece tread composition (rubber) 400 LF $ 1.00 $ 400.00 0001BT provide & install two piece nosing tread composition (vinyl) 400 LF $ 1.00 $ 400.00

0001BU provide & install stringer/landing trim(rubber) 400 LF $ 1.50 $ 600.00 0001BV provide & install stringer landing trim(vinyl) 400 LF $ 1.50 $ 600.00 0001BW remove existing ceramic mosaic tile 4000 SF $ 0.50 $ 2,000.00 0001BX provide & install ceramic mosaic tile, thin set 1x1 2000 SF $ 1.00 $ 2,000.00 0001BY provide & install ceramic mosaic tile, thick set 1x1 2000 SF $ 1.00 $ 2,000.00 0001BZ provide & install ceramic mosaic tile, thin set 2x2 2000 SF $ 1.00 $ 2,000.00 0001CA provide & install ceramic mosaic tile, thick set 2x2 2000 SF $ 1.10 $ 2,200.00 0001CB provide & install ceramic mosaic tile, thin set 3x3 2000 SF $ 1.20 $ 2,400.00 0001CC provide & install ceramic mosaic tile, thick set 3x3 2000 SF $ 1.50 $ 3,000.00 0001CD remove cement backer board 2000 SF $ 0.40 $ 800.00 0001CE provide & install cement backer board 2000 SF $ 1.00 $ 2,000.00 0001CF remove quarry tile 8000 SF $ 0.25 $ 2,000.00 0001CG provide & install quarry tile 6x6x1/2 thin set 4000 SF $ 1.50 $ 6,000.00 0001CH provide & install quarry tile 6x6x1/2 thick set 4000 SF $ 1.50 $ 6,000.00 0001CJ provide & install quarry tile bull nosing 300 LF $ 2.00 $ 600.00 0001CK remove glazed wall tile 1200 SF $ 0.50 $ 600.00 0001CL remove wall tile backer board 1200 SF $ 0.40 $ 480.00 0001CM provide & install glazed wall tile 4 1/4 x 4 1/4 thin set 400 SF $ 1.00 $ 400.00 0001CN provide & install glazed wall tile 4 1/4 x 6 thin set 400 SF $ 1.00 $ 400.00 0001CP provide & install glazed wall tile 6 x 6 thin set 400 SF $ 1.00 $ 400.00 0001CQ remove rubber flooring 15000 SF $ 0.25 $ 3,750.00 0001CR remove metal base 400 LF $ 0.25 $ 100.00 0001CS provide & install 4 x4 metal base 400 LF $ 0.75 $ 300.00 0001CT provide & install 6 x 4 metal base 400 LF $ 1.00 $ 400.00 0001CU provide & install 6 x 6 metal base 400 LF $ 1.00 $ 400.00 0001CV provide & install rubber flooring 4 x 4 x 3/8 2500 SF $ 5.00 $ 12,500.00 0001CW provide & install rubber flooring 4 x 4 x 1/2 2500 SF $ 2.00 $ 5,000.00 0001CX provide & install rubber flooring 4 x 4 x 3/4 2500 SF $ 6.00 $ 15,000.00 0001CY provide & install rubber flooring 3/8" roll 2500 SF $ 3.00 $ 7,500.00 0001CZ provide & install rubber flooring 1/2" roll 2500 SF $ 2.00 $ 5,000.00 0001DA provide & install rubber flooring 3/4" roll 2500 SF $ 2.00 $ 5,000.00 0001DB remove / replace toilet seal / supply line 400 EACH $ 5.00 $ 2,000.00 0001DC remove / replace brass bolts ( 2 per toilet) 400 EACH $ 5.00 $ 2,000.00 0001DD remove / replace vinyl insert, bolts and nuts 400 EACH $ 1.00 $ 400.00 0001DE remove gypsum wall board 6000 SF $ 0.25 $ 1,500.00 0001DF provide & install gypsum wall board fire rated 5/8 2000 SF $ 0.50 $ 1,000.00 0001DG provide & install gypsum wall board water resistant 1/2 and 5/8 2000 SF $ 0.50 $ 1,000.00 0001DH provide & install gypsum wall board standard 1/2" and 5/8 2000 SF $ 0.50 $ 1,000.00 0001DJ heat weld sheet vinyl floor covering 750 LF $ 5.00 $ 3,750.00 0001DK chemical weld sheet vinyl floor covering 750 LF $ 1.00 $ 750.00 0001DL remove furniture/equipment and place furniture back 4500 SY $ 5.00 $ 22,500.00 0001DM remove deteriorated wood subflooring 1000 SF $ 0.50 $ 500.00 0001DN remove deteriorated 2x wood framing 2000 BF $ 0.50 $ 1,000.00 0001DP remove deteriorated 1 x wood framing 600 BF $ 0.25 $ 150.00 0001DQ replace wood subflooring 2000 SF $ 0.50 $ 1,000.00 0001DR replace 2 x wood framing 2000 BF $ 1.00 $ 2,000.00 0001DS replace 1 x wood framing 2000 BF $ 0.50 $ 1,000.00

0001DT remove insulation 1500 SF $ 0.10 $ 150.00 0001DU provide & install 3 1/2" R11, 15 wide 500 SF $ 0.25 $ 125.00 0001DV provide & install 3 1/2 "R11, 23 wide 500 SF $ 0.25 $ 125.00 0001DW provide & install 6"R19 15 wide 500 SF $ 0.40 $ 200.00 0001DX provide & install 6; R19, 23 wide 500 SF $ 0.40 $ 200.00 0001DY remove deteriorated metal framing 500 SF $ 0.25 $ 125.00 0001DZ provide & install metal framing 500 SF $ 0.60 $ 300.00 0001EA trim wood door 50 EACH $ 5.00 $ 250.00 0001EB trim metal door 50 EACH $ 5.00 $ 250.00 0001EC remove wood trim 500 LF $ 0.50 $ 250.00 0001ED provide & install wood trim 500 LF $ 1.00 $ 500.00 0001EE remove vinyl trim 500 LF $ 0.25 $ 125.00 0001EF provide & install vinyl trim 500 LF $ 0.50 $ 250.00 0001EG clean / liquid wax resilient flooring 40000 SF $ 0.50 $ 20,000.00 0001EH clean ceramic tile 8000 SF $ 0.50 $ 4,000.00 0001EJ clean rubber flooring 15000 SF $ 0.25 $ 3,750.00 0001EK clean quarry tile 8000 SF $ 0.50 $ 4,000.00 0001EL clean & shampoo carpet 20000 SY $ 0.20 $ 4,000.00 0001EM Pressure wash 15000 SF $ 1.00 $ 15,000.00 0001EN repair minor miscellaneous plumbing work 200 HOURS $ 15.00 $ 3,000.00 0001EP repair minor miscellaneous electrical work 200 HOURS $ 15.00 $ 3,000.00 0001EQ painting (primmer, 2 coats) 40000 SF $ 0.90 $ 36,000.00 0001ER non pre-priced items (not to exceed 300,000.00) DELETE NOT TO

EXCEED STATEMENT = 0.00

1 LS $ - $ -

0001ES provide & install Ceramic tile (12x12) 2000 SF $ 2.00 $ 4,000.00 0001ET provide & install Ceramic tile (12x12) non-slip 2000 SF $ 2.00 $ 4,000.00 0001EU remove non-slip composition (12x12x1/8) 1000 SF $ 0.50 $ 500.00 0001EV provide & install non-slip composition (12x12x1/8) 1000 SF $ 1.00 $ 1,000.00 0001EW remove and dispose of Asbestos flooring materials 40000 SF $ 4.00 $ 160,000.00 0001EX Provide & install concrete floor patch 5000 SF $ 1.00 $ 5,000.00 0001EY Provide & install reinforced concrete 3000 psi 600 CY $ 100.00 $ 60,000.00 0001EZ Provide & install reinforced concrete 5000 psi 600 CY $ 100.00 $ 60,000.00 0001FA Clean, brush, or grind grout joint 1500 LF $ 0.10 $ 150.00 0001FB Grout tile joints (cement-based sanded & unsanded) 1500 LF $ 0.25 $ 375.00 0001FC Grout tile joints (epoxy) 1500 LF $ 0.25 $ 375.00 0001FD Stain grout joints 1500 LF $ 0.25 $ 375.00 0001FE Provide & install Grout Sealer 2500 SF $ 0.20 $ 500.00 0001FF Provide & install Floor Covering Sealer 10000 SF $ 0.20 $ 2,000.00 0001FF Remove existing floor wax 20000 SF $ 0.10 $ 2,000.00 0001FH Clean & wax resilient flooring/buff 40000 SF $ 0.10 $ 4,000.00 0001FJ Clean Concrete Flooring 12000 SF $ 0.20 $ 2,400.00 0001FK remove metal threshold 100 EACH $ 1.00 $ 100.00 0001FL provide & install metal threshold 100 EACH $ 25.00 $ 2,500.00 0001FM remove marble/synthetic threshold 100 EACH $ 1.00 $ 100.00 0001FN provide & Install synthetic marble threshold 100 EACH $ 10.00 $ 1,000.00 0001FP provide & install marble threshold 100 EACH $ 20.00 $ 2,000.00 0001FQ remove epoxy flooring 1000 SF $ 0.10 $ 100.00

0001FR provide & install epoxy flooring 1/4" 1000 SF $ 0.50 $ 500.00 0001FS provide & install epoxy flooring 3/8" 1000 SF $ 0.60 $ 600.00 0001FT provide & install epoxy flooring w/glaze and non-skid surface 1/4" 1000 SF $ 1.00 $ 1,000.00 0001FU provide & install epoxy flooring w/glaze and non-skid surface 3/8" 1000 SF $ 1.10 $ 1,100.00 0001FV provide & install epoxy flooring chemical resistance 1/4" 1000 SF $ 1.20 $ 1,200.00 0001FW provide & install epoxy flooring chemical resistance 3/8" 1000 SF $ 1.50 $ 1,500.00 0001FX provide & install protective coating for tile & grout 1000 SF $ 0.25 $ 250.00 0001FZ provide & install protective coating for grout (deep clean and restore/color grout joint)

1000 SF $ 0.50 $ 500.00

0001GA provide & install protective coating for concrete 1000 SF $ 0.20 $ 200.00 0001GB provide & install protective coating for painted or stained concrete 1000 SF $ 0.20 $ 200.00 0001GC restoration cleaning(remove highly impacted organic material) 1000 SF $ 0.25 $ 250.00 0001GD restoration cleaning (light coating removal) 1000 SF $ 0.20 $ 200.00 0001GE restoration cleaning (medium coating removal) 1000 SF $ 0.20 $ 200.00

END OF BASE YEAR $ 1,298,355.00

FIRST OPTION YEAR

Item DESCRIPTION QUANTITY UNIT OF

ISSUE

U/P AMOUNT

1001AA Provide & install carpet, loop 28 oz 2100 SY $ 26.25 $ 55,125.00 1001AB Remove existing loop or cut pile carpet 3100 SY $ 3.15 $ 9,765.00 1001AC provide & install carpet, cut pile 30 oz 1000 SY $ 10.50 $ 10,500.00 1001AD provide & install loop modular tile carpet (24 x24, 26 oz) 4000 SY $ 32.55 $ 130,200.00 1001AE provide & install loop modular tile entrance carpet (24x24, 42 oz.) 100 SY $ 5.25 $ 525.00 1001AF remove existing modular tile carpet 4100 SY $ 0.53 $ 2,173.00 1001AG remove existing padding(cushion) 1000 SY $ 0.11 $ 110.00 1001AH remove existing laminate flooring 25000 SF $ 0.11 $ 2,750.00 1001AJ provide & install commercial laminate flooring 25000 SF $ 5.88 $ 147,000.00 1001AK provide & install new padding (cushion) bonded urethane, 6.5 lbs 600 SY $ 1.05 $ 630.00 1001AL remove wood quarter round 3000 LF $ 0.11 $ 330.00 1001AM remove wood base 3000 LF $ 0.11 $ 330.00 1001AN provide & install wood base molding 3000 LF $ 0.53 $ 1,590.00 1001AP provide & install quarter round molding 3000 LF $ 1.05 $ 3,150.00 1001AQ remove edge strip (molding) 1400 LF $ 1.05 $ 1,470.00 1001AR provide & install metal edge strip(molding) 700 LF $ 3.15 $ 2,205.00 1001AS provide & install vinyl edge strip(molding) 700 LF $ 1.05 $ 735.00 1001AT remove floor door stops 50 EACH $ 1.05 $ 52.50 1001AU provide & install floor door stops 50 EACH $ 2.10 $ 105.00 1001AV provide & install skim coat on floor 10000 SY $ 3.15 $ 31,500.00 1001AW provide & install leveling coat on floor 2000 SY $ 1.05 $ 2,100.00 1001AX remove tackless strip 1500 LF $ 0.11 $ 165.00 1001AY provide & install tackless strip 1500 LF $ 0.11 $ 165.00 1001AZ remove composition tile 40000 SF $ 2.10 $ 84,000.00 1001BA provide & install composition tile (12x12x1/8) 40000 SF $ 4.20 $ 168,000.00 1001BB remove rolled sheet vinyl flooring 9000 SF $ 0.53 $ 4,770.00 1001BC provide & install rolled sheet vinyl flooring with backing 4500 SF $ 4.20 $ 18,900.00

1001BD provide & install rolled sheet vinyl flooring without backing 4500 SF $ 5.88 $ 26,460.00 1001BE remove resilient base 4" 10000 LF $ 1.05 $ 10,500.00 1001BF remove resilient base 6" 5000 LF $ 0.11 $ 550.00 1001BG provide & install resilient base 4" 10000 LF $ 3.84 $ 38,400.00 1001BH provide & install resilient base 6" 5000 LF $ 3.95 $ 19,750.00 1001BJ remove conductive resilient flooring 1000 SF $ 0.32 $ 320.00 1001BK remove ceramic / porcelain flooring 4000 SF $ 0.42 $ 1,680.00 1001BL provide & install porcelain flooring 12' x 12" 2000 SF $ 2.10 $ 4,200.00 1001BM provide & install porcelain flooring 12" x 12" non-slip 2000 SF $ 2.10 $ 4,200.00 1001BN provide & install conductive resilent flooring 1000 SF $ 1.05 $ 1,050.00 1001BP remove composition rubber/vinyl, nosing, treads 1000 LF $ 0.21 $ 210.00 1001BQ provide & install one-piece nosing/tread composition (rubber) 400 LF $ 1.05 $ 420.00 1001BR provide & install one-piece nosing/tread composition(vinyl) 400 LF $ 1.05 $ 420.00 1001BS provide & install two piece tread composition (rubber) 400 LF $ 1.05 $ 420.00 1001BT provide & install two piece nosing tread composition (vinyl) 400 LF $ 1.05 $ 420.00 1001BU provide & install stringer/landing trim(rubber) 400 LF $ 1.58 $ 632.00 1001BV provide & install stringer landing trim(vinyl) 400 LF $ 1.58 $ 632.00 1001BW remove existing ceramic mosaic tile 4000 SF $ 0.53 $ 2,120.00 1001BX provide & install ceramic mosaic tile, thin set 1x1 2000 SF $ 1.05 $ 2,100.00 1001BY provide & install ceramic mosaic tile, thick set 1x1 2000 SF $ 1.05 $ 2,100.00 1001BZ provide & install ceramic mosaic tile, thin set 2x2 2000 SF $ 1.05 $ 2,100.00 1001CA provide & install ceramic mosaic tile, thick set 2x2 2000 SF $ 1.16 $ 2,320.00 1001CB provide & install ceramic mosaic tile, thin set 3x3 2000 SF $ 1.26 $ 2,520.00 1001CC provide & install ceramic mosaic tile, thick set 3x3 2000 SF $ 1.58 $ 3,160.00 1001CD remove cement backer board 2000 SF $ 0.42 $ 840.00 1001CE provide & install cement backer board 2000 SF $ 1.05 $ 2,100.00 1001CF remove quarry tile 8000 SF $ 0.26 $ 2,080.00 1001CG provide & install quarry tile 6x6x1/2 thin set 4000 SF $ 1.58 $ 6,320.00 1001CH provide & install quarry tile 6x6x1/2 thick set 4000 SF $ 1.58 $ 6,320.00 1001CJ provide & install quarry tile bull nosing 300 LF $ 2.10 $ 630.00 1001CK remove glazed wall tile 1200 SF $ 0.53 $ 636.00 1001CL remove wall tile backer board 1200 SF $ 0.42 $ 504.00 1001CM provide & install glazed wall tile 4 1/4 x 4 1/4 thin set 400 SF $ 1.05 $ 420.00 1001CN provide & install glazed wall tile 4 1/4 x 6 thin set 400 SF $ 1.05 $ 420.00 1001CP provide & install glazed wall tile 6 x 6 thin set 400 SF $ 1.05 $ 420.00 1001CQ remove rubber flooring 15000 SF $ 0.26 $ 3,900.00 1001CR remove metal base 400 LF $ 0.26 $ 104.00 1001CS provide & install 4 x4 metal base 400 LF $ 0.79 $ 316.00 1001CT provide & install 6 x 4 metal base 400 LF $ 1.05 $ 420.00 1001CU provide & install 6 x 6 metal base 400 LF $ 1.05 $ 420.00 1001CV provide & install rubber flooring 4 x 4 x 3/8 2500 SF $ 5.25 $ 13,125.00 1001CW provide & install rubber flooring 4 x 4 x 1/2 2500 SF $ 2.10 $ 5,250.00 1001CX provide & install rubber flooring 4 x 4 x 3/4 2500 SF $ 6.30 $ 15,750.00 1001CY provide & install rubber flooring 3/8" roll 2500 SF $ 3.15 $ 7,875.00 1001CZ provide & install rubber flooring 1/2" roll 2500 SF $ 2.10 $ 5,250.00 1001DA provide & install rubber flooring 3/4" roll 2500 SF $ 2.10 $ 5,250.00 1001DB remove / replace toilet seal / supply line 400 EACH $ 5.25 $ 2,100.00

1001DC remove / replace brass bolts ( 2 per toilet) 400 EACH $ 5.25 $ 2,100.00 1001DD remove / replace vinyl insert, bolts and nuts 400 EACH $ 1.05 $ 420.00 1001DE remove gypsum wall board 6000 SF $ 0.26 $ 1,560.00 1001DF provide & install gypsum wall board fire rated 5/8 2000 SF $ 0.53 $ 1,060.00 1001DG provide & install gypsum wall board water resistant 1/2 and 5/8 2000 SF $ 0.53 $ 1,060.00 1001DH provide & install gypsum wall board standard 1/2" and 5/8 2000 SF $ 0.53 $ 1,060.00 1001DJ heat weld sheet vinyl floor covering 750 LF $ 5.25 $ 3,937.50 1001DK chemical weld sheet vinyl floor covering 750 LF $ 1.05 $ 787.50 1001DL remove furniture/equipment and place furniture back 4500 SY $ 5.25 $ 23,625.00 1001DM remove deteriorated wood subflooring 1000 SF $ 0.53 $ 530.00 1001DN remove deteriorated 2x wood framing 2000 BF $ 0.53 $ 1,060.00 1001DP remove deteriorated 1 x wood framing 600 BF $ 0.26 $ 156.00 1001DQ replace wood subflooring 2000 SF $ 0.53 $ 1,060.00 1001DR replace 2 x wood framing 2000 BF $ 1.05 $ 2,100.00 1001DS replace 1 x wood framing 2000 BF $ 0.53 $ 1,060.00 1001DT remove insulation 1500 SF $ 0.11 $ 165.00 1001DU provide & install 3 1/2" R11, 15 wide 500 SF $ 0.26 $ 130.00 1001DV provide & install 3 1/2 "R11, 23 wide 500 SF $ 0.26 $ 130.00 1001DW provide & install 6"R19 15 wide 500 SF $ 0.42 $ 210.00 1001DX provide & install 6; R19, 23 wide 500 SF $ 0.42 $ 210.00 1001DY remove deteriorated metal framing 500 SF $ 0.26 $ 130.00 1001DZ provide & install metal framing 500 SF $ 0.63 $ 315.00 1001EA trim wood door 50 EACH $ 5.25 $ 262.50 1001EB trim metal door 50 EACH $ 5.25 $ 262.50 1001EC remove wood trim 500 LF $ 0.53 $ 265.00 1001ED provide & install wood trim 500 LF $ 1.05 $ 525.00 1001EE remove vinyl trim 500 LF $ 0.26 $ 130.00 1001EF provide & install vinyl trim 500 LF $ 0.53 $ 265.00 1001EG clean / liquid wax resilient flooring 40000 SF $ 0.53 $ 21,200.00 1001EH clean ceramic tile 8000 SF $ 0.53 $ 4,240.00 1001EJ clean rubber flooring 15000 SF $ 0.26 $ 3,900.00 1001EK clean quarry tile 8000 SF $ 0.53 $ 4,240.00 1001EL clean & shampoo carpet 20000 SY $ 0.21 $ 4,200.00 1001EM Pressure wash 15000 SF $ 1.05 $ 15,750.00 1001EN repair minor miscellaneous plumbing work 200 HOURS $ 15.75 $ 3,150.00 1001EP repair minor miscellaneous electrical work 200 HOURS $ 15.75 $ 3,150.00 1001EQ painting (primmer, 2 coats) 40000 SF $ 0.95 $ 38,000.00 1001ER non pre-priced items (not to exceed 300,000.00) DELETE NOT TO

EXCEED STATEMENT = 0.00

1 LS $ - $ -

1001ES provide & install Ceramic tile (12x12) 2000 SF $ 2.10 $ 4,200.00 1001ET provide & install Ceramic tile (12x12) non-slip 2000 SF $ 6.30 $ 12,600.00 1001EU remove non-slip composition (12x12x1/8) 1000 SF $ 0.53 $ 530.00 1001EV provide & install non-slip composition (12x12x1/8) 1000 SF $ 1.05 $ 1,050.00 1001EW remove and dispose of Asbestos flooring materials 40000 SF $ 4.20 $ 168,000.00 1001EX Provide & install concrete floor patch 5000 SF $ 1.05 $ 5,250.00 1001EY Provide & install reinforced concrete 3000 psi 600 CY $ 105.00 $ 63,000.00 1001EZ Provide & install reinforced concrete 5000 psi 600 CY $ 105.00 $ 63,000.00

1001FA Clean, brush, or grind grout joint 1500 LF $ 0.11 $ 165.00 1001FB Grout tile joints (cement-based sanded & unsanded) 1500 LF $ 0.26 $ 390.00 1001FC Grout tile joints (epoxy) 1500 LF $ 0.26 $ 390.00 1001FD Stain grout joints 1500 LF $ 0.26 $ 390.00 1001FE Provide & install Grout Sealer 2500 SF $ 0.21 $ 525.00 1001FF Provide & install Floor Covering Sealer 10000 SF $ 0.21 $ 2,100.00 1001FF Remove existing floor wax 20000 SF $ 0.11 $ 2,200.00 1001FH Clean & wax resilient flooring/buff 40000 SF $ 0.11 $ 4,400.00 1001FJ Clean Concrete Flooring 12000 SF $ 0.21 $ 2,520.00 1001FK remove metal threshold 100 EACH $ 1.05 $ 105.00 1001FL provide & install metal threshold 100 EACH $ 26.25 $ 2,625.00 1001FM remove marble/synthetic threshold 100 EACH $ 1.05 $ 105.00 1001FN provide & Install synthetic marble threshold 100 EACH $ 10.50 $ 1,050.00 1001FP provide & install marble threshold 100 EACH $ 21.00 $ 2,100.00 1001FQ remove epoxy flooring 1000 SF $ 0.11 $ 110.00 1001FR provide & install epoxy flooring 1/4" 1000 SF $ 0.53 $ 530.00 1001FS provide & install epoxy flooring 3/8" 1000 SF $ 0.63 $ 630.00 1001FT provide & install epoxy flooring w/glaze and non-skid surface 1/4" 1000 SF $ 1.05 $ 1,050.00 1001FU provide & install epoxy flooring w/glaze and non-skid surface 3/8" 1000 SF $ 1.16 $ 1,160.00 1001FV provide & install epoxy flooring chemical resistance 1/4" 1000 SF $ 1.26 $ 1,260.00 1001FW provide & install epoxy flooring chemical resistance 3/8" 1000 SF $ 1.58 $ 1,580.00 1001FX provide & install protective coating for tile & grout 1000 SF $ 0.26 $ 260.00 1001FZ provide & install protective coating for grout (deep clean and restore/color grout joint)

1000 SF $ 0.53 $ 530.00

1001GA provide & install protective coating for concrete 1000 SF $ 0.21 $ 210.00 1001GB provide & install protective coating for painted or stained concrete 1000 SF $ 0.21 $ 210.00 1001GC restoration cleaning(remove highly impacted organic material) 1000 SF $ 0.26 $ 260.00 1001GD restoration cleaning (light coating removal) 1000 SF $ 0.21 $ 210.00 1001GE restoration cleaning (medium coating removal) 1000 SF $ 0.21 $ 210.00

END OF FIRST OPTION YEAR $ 1,372,790.50

SECOND OPTION YEAR

Item DESCRIPTION QUANTITY UNIT OF

ISSUE

U/P AMOUNT

2001AA Provide & install carpet, loop 28 oz 2100 SY $ 27.56 $ 57,876.00 2001AB Remove existing loop or cut pile carpet 3100 SY $ 3.31 $ 10,261.00 2001AC provide & install carpet, cut pile 30 oz 1000 SY $ 11.03 $ 11,030.00 2001AD provide & install loop modular tile carpet (24 x24, 26 oz) 4000 SY $ 34.18 $ 136,720.00 2001AE provide & install loop modular tile entrance carpet (24x24, 42 oz.) 100 SY $ 5.51 $ 551.00 2001AF remove existing modular tile carpet 4100 SY $ 0.56 $ 2,296.00 2001AG remove existing padding(cushion) 1000 SY $ 0.12 $ 120.00 2001AH remove existing laminate flooring 25000 SF $ 0.12 $ 3,000.00 2001AJ provide & install commercial laminate flooring 25000 SF $ 6.17 $ 154,250.00 2001AK provide & install new padding (cushion) bonded urethane, 6.5 lbs 600 SY $ 1.10 $ 660.00 2001AL remove wood quarter round 3000 LF $ 0.12 $ 360.00 2001AM remove wood base 3000 LF $ 0.12 $ 360.00

2001AN provide & install wood base molding 3000 LF $ 0.56 $ 1,680.00 2001AP provide & install quarter round molding 3000 LF $ 1.10 $ 3,300.00 2001AQ remove edge strip (molding) 1400 LF $ 1.58 $ 2,212.00 2001AR provide & install metal edge strip(molding) 700 LF $ 3.31 $ 2,317.00 2001AS provide & install vinyl edge strip(molding) 700 LF $ 1.10 $ 770.00 2001AT remove floor door stops 50 EACH $ 1.10 $ 55.00 2001AU provide & install floor door stops 50 EACH $ 2.21 $ 110.50 2001AV provide & install skim coat on floor 10000 SY $ 3.31 $ 33,100.00 2001AW provide & install leveling coat on floor 2000 SY $ 1.10 $ 2,200.00 2001AX remove tackless strip 1500 LF $ 0.12 $ 180.00 2001AY provide & install tackless strip 1500 LF $ 0.12 $ 180.00 2001AZ remove composition tile 40000 SF $ 2.21 $ 88,400.00 2001BA provide & install composition tile (12x12x1/8) 40000 SF $ 4.41 $ 176,400.00 2001BB remove rolled sheet vinyl flooring 9000 SF $ 0.56 $ 5,040.00 2001BC provide & install rolled sheet vinyl flooring with backing 4500 SF $ 4.41 $ 19,845.00 2001BD provide & install rolled sheet vinyl flooring without backing 4500 SF $ 6.17 $ 27,765.00 2001BE remove resilient base 4" 10000 LF $ 1.58 $ 15,800.00 2001BF remove resilient base 6" 5000 LF $ 0.12 $ 600.00 2001BG provide & install resilient base 4" 10000 LF $ 4.03 $ 40,300.00 2001BH provide & install resilient base 6" 5000 LF $ 4.15 $ 20,750.00 2001BJ remove conductive resilient flooring 1000 SF $ 0.34 $ 340.00 2001BK remove ceramic / porcelain flooring 4000 SF $ 0.44 $ 1,760.00 2001BL provide & install porcelain flooring 12' x 12" 2000 SF $ 2.21 $ 4,420.00 2001BM provide & install porcelain flooring 12" x 12" non-slip 2000 SF $ 2.21 $ 4,420.00 2001BN provide & install conductive resilent flooring 1000 SF $ 1.58 $ 1,580.00 2001BP remove composition rubber/vinyl, nosing, treads 1000 LF $ 0.22 $ 220.00 2001BQ provide & install one-piece nosing/tread composition (rubber) 400 LF $ 1.10 $ 440.00 2001BR provide & install one-piece nosing/tread composition(vinyl) 400 LF $ 1.10 $ 440.00 2001BS provide & install two piece tread composition (rubber) 400 LF $ 1.10 $ 440.00 2001BT provide & install two piece nosing tread composition (vinyl) 400 LF $ 1.10 $ 440.00 2001BU provide & install stringer/landing trim(rubber) 400 LF $ 1.66 $ 664.00 2001BV provide & install stringer landing trim(vinyl) 400 LF $ 1.66 $ 664.00 2001BW remove existing ceramic mosaic tile 4000 SF $ 0.56 $ 2,240.00 2001BX provide & install ceramic mosaic tile, thin set 1x1 2000 SF $ 1.10 $ 2,200.00 2001BY provide & install ceramic mosaic tile, thick set 1x1 2000 SF $ 1.10 $ 2,200.00 2001BZ provide & install ceramic mosaic tile, thin set 2x2 2000 SF $ 1.10 $ 2,200.00 2001CA provide & install ceramic mosaic tile, thick set 2x2 2000 SF $ 1.22 $ 2,440.00 2001CB provide & install ceramic mosaic tile, thin set 3x3 2000 SF $ 1.32 $ 2,640.00 2001CC provide & install ceramic mosaic tile, thick set 3x3 2000 SF $ 1.66 $ 3,320.00 2001CD remove cement backer board 2000 SF $ 0.44 $ 880.00 2001CE provide & install cement backer board 2000 SF $ 1.10 $ 2,200.00 2001CF remove quarry tile 8000 SF $ 0.27 $ 2,160.00 2001CG provide & install quarry tile 6x6x1/2 thin set 4000 SF $ 1.66 $ 6,640.00 2001CH provide & install quarry tile 6x6x1/2 thick set 4000 SF $ 1.66 $ 6,640.00 2001CJ provide & install quarry tile bull nosing 300 LF $ 2.21 $ 663.00 2001CK remove glazed wall tile 1200 SF $ 0.56 $ 672.00 2001CL remove wall tile backer board 1200 SF $ 0.44 $ 528.00

2001CM provide & install glazed wall tile 4 1/4 x 4 1/4 thin set 400 SF $ 1.10 $ 440.00 2001CN provide & install glazed wall tile 4 1/4 x 6 thin set 400 SF $ 1.10 $ 440.00 2001CP provide & install glazed wall tile 6 x 6 thin set 400 SF $ 1.10 $ 440.00 2001CQ remove rubber flooring 15000 SF $ 0.27 $ 4,050.00 2001CR remove metal base 400 LF $ 0.27 $ 108.00 2001CS provide & install 4 x4 metal base 400 LF $ 0.83 $ 332.00 2001CT provide & install 6 x 4 metal base 400 LF $ 1.10 $ 440.00 2001CU provide & install 6 x 6 metal base 400 LF $ 1.10 $ 440.00 2001CV provide & install rubber flooring 4 x 4 x 3/8 2500 SF $ 5.51 $ 13,775.00 2001CW provide & install rubber flooring 4 x 4 x 1/2 2500 SF $ 2.21 $ 5,525.00 2001CX provide & install rubber flooring 4 x 4 x 3/4 2500 SF $ 6.62 $ 16,550.00 2001CY provide & install rubber flooring 3/8" roll 2500 SF $ 3.31 $ 8,275.00 2001CZ provide & install rubber flooring 1/2" roll 2500 SF $ 2.21 $ 5,525.00 2001DA provide & install rubber flooring 3/4" roll 2500 SF $ 2.21 $ 5,525.00 2001DB remove / replace toilet seal / supply line 400 EACH $ 5.51 $ 2,204.00 2001DC remove / replace brass bolts ( 2 per toilet) 400 EACH $ 5.51 $ 2,204.00 2001DD remove / replace vinyl insert, bolts and nuts 400 EACH $ 1.10 $ 440.00 2001DE remove gypsum wall board 6000 SF $ 0.27 $ 1,620.00 2001DF provide & install gypsum wall board fire rated 5/8 2000 SF $ 0.56 $ 1,120.00 2001DG provide & install gypsum wall board water resistant 1/2 and 5/8 2000 SF $ 0.56 $ 1,120.00 2001DH provide & install gypsum wall board standard 1/2" and 5/8 2000 SF $ 0.56 $ 1,120.00 2001DJ heat weld sheet vinyl floor covering 750 LF $ 5.51 $ 4,132.50 2001DK chemical weld sheet vinyl floor covering 750 LF $ 1.10 $ 825.00 2001DL remove furniture/equipment and place furniture back 4500 SY $ 5.51 $ 24,795.00 2001DM remove deteriorated wood subflooring 1000 SF $ 0.56 $ 560.00 2001DN remove deteriorated 2x wood framing 2000 BF $ 0.56 $ 1,120.00 2001DP remove deteriorated 1 x wood framing 600 BF $ 0.27 $ 162.00 2001DQ replace wood subflooring 2000 SF $ 0.56 $ 1,120.00 2001DR replace 2 x wood framing 2000 BF $ 1.10 $ 2,200.00 2001DS replace 1 x wood framing 2000 BF $ 0.56 $ 1,120.00 2001DT remove insulation 1500 SF $ 0.12 $ 180.00 2001DU provide & install 3 1/2" R11, 15 wide 500 SF $ 0.27 $ 135.00 2001DV provide & install 3 1/2 "R11, 23 wide 500 SF $ 0.27 $ 135.00 2001DW provide & install 6"R19 15 wide 500 SF $ 0.44 $ 220.00 2001DX provide & install 6; R19, 23 wide 500 SF $ 0.44 $ 220.00 2001DY remove deteriorated metal framing 500 SF $ 0.27 $ 135.00 2001DZ provide & install metal framing 500 SF $ 0.66 $ 330.00 2001EA trim wood door 50 EACH $ 5.51 $ 275.50 2001EB trim metal door 50 EACH $ 5.51 $ 275.50 2001EC remove wood trim 500 LF $ 0.56 $ 280.00 2001ED provide & install wood trim 500 LF $ 1.10 $ 550.00 2001EE remove vinyl trim 500 LF $ 0.27 $ 135.00 2001EF provide & install vinyl trim 500 LF $ 0.56 $ 280.00 2001EG clean / liquid wax resilient flooring 40000 SF $ 0.56 $ 22,400.00 2001EH clean ceramic tile 8000 SF $ 0.56 $ 4,480.00 2001EJ clean rubber flooring 15000 SF $ 0.27 $ 4,050.00 2001EK clean quarry tile 8000 SF $ 0.56 $ 4,480.00

2001EL clean & shampoo carpet 20000 SY $ 0.22 $ 4,400.00 2001EM Pressure wash 15000 SF $ 1.10 $ 16,500.00 2001EN repair minor miscellaneous plumbing work 200 HOURS $ 16.54 $ 3,308.00 2001EP repair minor miscellaneous electrical work 200 HOURS $ 16.54 $ 3,308.00 2001EQ painting (primmer, 2 coats) 40000 SF $ 1.00 $ 40,000.00 2001ER non pre-priced items (not to exceed 300,000.00) DELETE NOT TO

EXCEED STATEMENT = 0.00

1 LS $ - $ -

2001ES provide & install Ceramic tile (12x12) 2000 SF $ 2.21 $ 4,420.00 2001ET provide & install Ceramic tile (12x12) non-slip 2000 SF $ 2.21 $ 4,420.00 2001EU remove non-slip composition (12x12x1/8) 1000 SF $ 0.56 $ 560.00 2001EV provide & install non-slip composition (12x12x1/8) 1000 SF $ 1.10 $ 1,100.00 2001EW remove and dispose of Asbestos flooring materials 40000 SF $ 4.41 $ 176,400.00 2001EX Provide & install concrete floor patch 5000 SF $ 1.10 $ 5,500.00 2001EY Provide & install reinforced concrete 3000 psi 600 CY $ 110.25 $ 66,150.00 2001EZ Provide & install reinforced concrete 5000 psi 600 CY $ 110.25 $ 66,150.00 2001FA Clean, brush, or grind grout joint 1500 LF…