Attachment_2-DD_254_Continuation_Sheet1.docx

CONTINUATION OF BLOCK 13 OF THE DD 254 PAGE 1 OF 4

SOLICITATION/CONTRACT #: W91249-18-R-0019

Ref 10.a: COMSEC - Classified COMSEC material is not releasable to contractor employees who have not received a final clearance at the appropriate security level. COMSEC access shall be IAW DOD 5220.22-M and AR 380-40. When access is required at Government facilities, contractor personnel will adhere to COMSEC rules and regulations as mandated by Command policy and procedures. Written concurrence of the contracting office (KO) is required prior to subcontracting.

Ref 10.j: For Official Use Only (FOUO) information is unclassified information which is exempt from release under the Freedom of Information Act. FOUO information provided or generated under this contract shall be safeguarded and marked as specified in DOD 5200.1-R, appendix 3.

“PROTECTING FOUO Information”

1. GENERAL:

a. The "For Official Use Only" (FOUO) marking is assigned to information at the time of its creation in a DoD User Agency. It is not authorized as a substitute for a security classification marking but is used on official government information that may be withheld from the public under exemptions 2 through 9 of the Freedom of Information Act (FOIA).

b. Other non-security markings, such as "Limited Official Use" and "Official Use Only" are used by non-DoD User Agencies for the same type of information and should be safeguarded and handled in accordance with instruction received from such agencies.

c. Use of the above markings does not mean that the information cannot be released to the public under FOIA, only that the Government must review the information prior to its release to determine whether a significant and legitimate government purpose is served by withholding the information or portions thereof.

2. MARKINGS:

a. An unclassified document containing FOUO information will be marked "For Official Use Only" at the bottom of the front cover (if any), on the first page, on each page containing FOUO information, on the back page, and on the outside of the back cover (if any).

b. Within a classified document, an individual page that contains both FOUO and classified information will be marked at the top and bottom with the highest security classification of information appearing on the page. If an individual portion contains FOUO information but no classified information, the portion will be marked, "FOUO."

c. Any "'For Official Use Only" information released to a contractor by a DoD User Agency is required to be marked with the following statement prior to transfer.

“This document contains information EXEMPT FROM MANDATORY DISCLOSURE UNDER THE FOIA. Exemptions apply.”

d. Removal of the "For Official Use Only" marking can only be accomplished by the originator or other competent authority. When the "For Official Use Only" status is terminated, all known holders will be notified to the extent practical.

3. DISSEMINATION: Contractors may disseminate "For Official Use Only" information to their employees and subcontractors who have a need for the information in connection with a classified contract. Contractors must ensure employees and subcontractors are aware of the special handling instructions detailed below.

CONTINUATION OF BLOCK 13 OF THE DD 254 PAGE 2 OF 4

SOLICITATION/CONTRACT #: W91249-18-R-0019

4. STORAGE: During working hours, "For Official Use Only" information shall be placed in an out-of-sight location if the work area is accessible to persons who do not have a need for the information. During nonworking hours, the information shall be stored to preclude unauthorized access. Filing such material with other unclassified records in unlocked files or desks, is adequate when internal building security is provided during nonworking hours. When such internal security control is not exercised, locked buildings or rooms will provide adequate after- hours protection or the material can be stored in locked receptacles such as file cabinets, desks, or bookcases.

5. TRANSMISSION: "For Official Use Only" information may be sent via first-class mail or parcel post. Bulky shipments may be sent by fourth-class mail. DoD components, officials of DoD components, and authorized DoD contractors, consultants, and grantees send FOUO information to each other to conduct official DoD business. Tell recipients the status of such information, and send the material in a way that prevents unauthorized public disclosure. Make sure documents that transmit FOUO material call attention to any FOUO attachments. Normally, you may send FOUO records over facsimile equipment. To prevent unauthorized disclosure, consider attaching special cover sheets, the location of sending and receiving machines, and whether authorized personnel are around to receive FOUO information. FOUO information may be passed to officials in other departments and agencies of the executive and judicial branches to fulfill a government function. Mark the records "For Official Use Only" and tell the recipient the information is exempt from public disclosure under the FOIA and requires special handling.

6. DISPOSITION: When no longer needed, FOUO information must be shredded.

7. UNAUTHORIZED DISCLOSURE: Unauthorized disclosure of "For Official Use Only" information does not constitute a security violation but the releasing agency should be informed of any unauthorized disclosure. The unauthorized disclosure of FOUO information protected by the Privacy Act may result in criminal sanctions and disciplinary action may be taken against those responsible.

Ref 11.a: Contractor access to classified information shall be limited to that which is necessary to support this work effort. Contractor performance is Fort Gordon, GA and Fort Leavenworth, KS. Government agency/activity will provide security classification guidance for performance of this contract. The contractor will comply with the provisions of DOD 5220.22-M, AR 380-5, and all applicable regulations and local policies and procedures governing the control, protection, and safeguarding of classified and sensitive (FOUO) material. The Facility Security Officer will submit a visit request to the KO and Security & Intelligence Division (SMO W6CBAA) for need-to-know verification.

The contractor shall not remove classified materials or information from the government work sites, nor shall the contractor use, reproduce, generate, or store any classified materials or information relating to this contract at other than specified government work locations.

Contractor personnel are authorized access to classified documents or materials, for use and reference, at government facilities only, to include government facilities visited while in temporary duty (TDY) travel status in support of this contract.

Continuation of Block 13: At work performance start date, contractor employees to include subcontractors, performing on this contract shall have a SECRET security clearance and shall maintain the required security clearance throughout the life of the contract. Contractors will ensure an owning relationship is established in JPAS for each individual performing duty in support of this performance work statement.

CONTINUATION OF BLOCK 13 OF THE DD 254 PAGE 3 OF 4

SOLICITATION/CONTRACT #: W91249-18-R-0019

The investigative basis for personnel security clearances should be IAW existing DOD policy. Eligibility based on investigations that are out of date, i.e., Top Secret (5 years), Secret (10 years) and Confidential (15 years) must be processed for a Periodic Reinvestigation within 10 days of being assigned to the contract.

Continuation of Block 13: Training Requirements

Initial Security Orientation and Annual Security Refresher Training. All contractor employees, including subcontractors, assigned to this contract shall complete the online Initial Security Orientation Training located on the Army Learning Management System (ALMS) site. Log into AKO, “Self Service”, “My Training”, “ALMS”, “Go To Mandatory Training”. Training must be completed within 30 days of reporting for duty. The contractor shall submit certificate of completion for each affected contractor employee and subcontractor employee to the COR and unit/activity security manager. The Annual Security Refresher Training is required annually thereafter. (Ref ALARACT 207/2013, DTG 291848Z Aug 13, Subj: Army Wide Rollout and Requirement for Standardized Computer Web-Based Security Training on the Army Learning Management System (ALMS)).

Anti-Terrorism (AT) Level I Training. All contractor employees, including subcontractors, assigned to this contract shall receive an initial Antiterrorism Level I Brief by a certified ATO Level II Officer within 30 days of reporting for duty. (Monthly briefings will be offered by the Garrison Antiterrorism Officer.) Annual refresher Antiterrorism Level I Training shall be completed on-line at https://jkodirect.jten.mil/Atlas2/faces/page/login/Login.seam or they may attend the monthly training offered by the Garrison ATO. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee to the COR and unit/activity security manager. (Ref Department of the Army, US Army Contracting Agency, SFCA-CO, 5 Sep 07, subject: Incorporation of Measures into the Contracting Process and AR 525-13, Antiterrorism).

Note: Contractor personnel shall receive an AOR briefing when traveling OCONUS on TDY. Briefing must be provided by a certified ATO Level II Officer. This is separate from the normal annual AT Level I training requirement. (Ref AR 525-13) iWATCH: All contractor employees, including subcontractors, assigned to this contract shall receive a brief on the local iWATCH program (provided in conjunction with the AT Level I Training). This training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 days of reporting to duty and annual refresher training with the results reported to the COR.

Operation Security (OPSEC) Training. All contractor employees, including subcontractors, assigned to this contract shall complete Level I OPSEC training within 30 days of reporting for duty and then annually thereafter. Initial Level 1 OPSEC training will be conducted monthly by the Garrison OPSEC Officer or a Level II certified OPSEC Officer. Annual refresher OPSEC training shall be completed on-line at http://cdsetrain.dtic.mil/opsec/index.htm. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee to the COR and unit/activity security manager. (Ref AR 530-1, Operations Security)

Threat Awareness and Reporting Program (TARP) Training. All contractor employees, including subcontractors, assigned to this contract shall complete TARP training within 30 days of reporting for duty and then annually thereafter. TARP training will be conducted monthly by the 902nd MI Group. The

CONTINUATION OF BLOCK 13 OF THE DD 254 PAGE 4 OF 4

SOLICITATION/CONTRACT #: W91249-18-R-0019

COR will ensure contractors are notified of available training. Completion of training shall be reported to the COR and the unit/activity security manager. Contractor personnel shall report threat-related incidents, behavioral indicators, and other matters to counterintelligence interest specified in AR 381-12 to the nearest military CI office. (Ref AR 381-12).

Information Assurance (IA)/Information Technology (IT) Training. All contractor employees and associated subcontractors must complete the DoD Cyber Awareness Challenge Training (https://ia.signal.army.mil/DoDIAA) before issuance of network access and annually thereafter.

Certificates of successful completion, for both initial awareness training and annual refresher training shall be provided to the COR. All contractor employees will successfully complete all required IA training as specified in AR 25-2 and as directed by the Government. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M, and AR 25-2.