Attachment_-_SALIENT_FEATURES.pdf

SALIENT FEATURES

Item 1 – Hydraulic Excavator h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle

Item 2 – Hydraulic Hammer Excavator Attachment

Hydraulic Hammers

Hydraulic Hammers

! Most Complete Line in the Industry

! Complete Hydraulic Kits Designed to fit Your Carrier

! Industry’s Most Comprehensive Field Service Corps

! Extensive Parts Distribution System

! Network of Nearly 300 Distributor Outlets

NPK ATTACHMENTS...designed, built and backed by NPK.NPK ATTACHMENTS...designed, built and backed by NPK.

Sleeve vs. Main Body Replacement Cost Comparison

1,000 ft. lbs.

Class

5,000 ft. lbs.

Class

$0 $10,000 $20,000 $30,000 $40,000 $50,000 $60,000 $70,000

NPK Hammers Competitive Hammers

All the Right Attachments!All the Right Attachments!

A better design that combines

! EFFICIENCY ! RELIABILITY ! SERVICEABILITY

A. Excellent power-to-weight ratio B. Unique gas-charged piston maximizes hammer efficiency C. Simple, two-moving-parts design for reliability D. Separate ports for the NPK Auto Lube system and an air line for underwater use E. Bottom tie rod nuts for easier serviceability (GH Models) F. Quick-change tool system with single round retainer pin G. Variety of tool configurations available H. Replaceable cylinder sleeves for easy, economical rebuild I. Tool bushings engineered for quick, easy replacement

Vibration control that increases operator comfort to increase EFFICIENCY Standard on all medium and large NPK hammers, our shock-absorbing mounting bracket uses special heavy duty rubber mounts to absorb shock, recoil, and impulse vibration. Their unique one-piece design eliminates the need for mechanical springs and overly heavy mounting brackets. The net result is that you minimize machine wear and improve operator comfort for greater reliability and productivity.

Simplified lubrication for greater RELIABILITY A grease port is provided for automatic and/or manual greasing of the demolition tool. This prevents damage or premature wear caused by a lack of grease.

Full SERVICEABILITY of the industry’s easiest, lowest cost, body-rebuild system Hammers aren’t meant to have an easy life. They occasionally need to be rebuilt. When the hammer body is involved, NPK’s replaceable sleeve design can reduce your costs by a factor of five to ten. Here are the typical costs involved to re-sleeve the body of an NPK hammer and replace the main body of a hammer from another major manufacturer.

R ub be r

M ou nt

H am m er

Bracket

A

B

D

C

H

I

F

G

E

HYDRAULIC HAMMERSHYDRAULIC HAMMERS

The right model for every machine

NPK Construction Equipment, Inc.

7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free (800) 225-4379 Fax (440) 232-4382 Internet: www.npkce.com

Each product sold by NPK is subject to an express written warranty. NPK makes no other warranty, express or implied, including any warranty of merchantability or fitness for any particular purpose. NPK is not liable for any incidental or consequential damages.

Printed in U.S.A. Form No. B03-0100 (02/11) © Copyright 2011, NPK Construction Equipment, Inc.

Sold and Serviced by:

NPK...All the Right Attachments! With innovation throughout construction’s most extensive line.

Compactor/Drivers Primary/Secondary Crushers Breaker Buckets Material Processors Heavy Duty Grapples Pedestal Breakers Quick Attach Couplers

Specifications NPK Impact Energy Impact Recommended Oil Operating Working Tool Tool Working Model Class* Frequency Carrier Weight Flow Pressure Weight Diameter Length ft lbs bpm tons gpm (lpm) psi (bar) lb (kg) in (mm) in (mm)

GH-06 150 480-1200 1.2-2.2 2.5-7 1,650 235 1.7 12.2

(10-25) (115) (107) (42) (311)

GH-07 200 500-1200 1.5-2.75 4-9 1,500 270 1.9 13.1

(15-35) (105) (125) (47) (333)

GH-1 350 550-1100 2.5-4.5 7-13 1,750 450 2.2 13.6

(25-50) (120) (205) (57) (346)

GH-2 500 500-1300 3-6 7-17 2,250 525 2.6 14.4

(25-65) (160) (240) (66) (367)

GH-3 750 500-1150 4-7.5 12-26 1,900 800 3.0 16.1

(45-100) (130) (365) (76) (408)

GH-4 1,300 400-1050 6.5-11 13-32 2,200 1,250 3.4 18

(50-120) (150) (570) (86) (458)

GH-6 2,000 500-800 11-15.5 24-40 2,400 2,150 4.2 20

(90-150) (165) (980) (106) (500)

GH-7 2,500 400-750 14-21 26-48 2,600 2,900 4.6 23

(100-180) (180) (1,320) (116) (583)

GH-9 3,000 500-670 20-28 40-53 2,600 3,600 5.0 24

(150-200) (180) (1,635) (126) (608)

GH-10 4,000 400-550 23-33 44-55 2,600 4,200 5.4 24.5

(165-210) (180) (1,900) (136) (620)

GH-12 5,500 380-480 28-43 45-58 2,650 5,650 5.7 25.5

(170-220) (183) (2,565) (146) (650)

GH-15 8,000 320-400 33-50 53-66 2,600 6,800 6.1 27

(200-250) (180) (3,085) (156) (690)

GH-18 12,000 300-400 35-57 58-77 2,500 7,800 6.5 29

(220-290) (172) (3,540) (165) (740)

GH-23 13,500 300-400 50-75 66-85 2,600 9,240 6.9 34.6

(250-320) (180) (4,190) (174) (880)

GH-30 15,000 310-390 50-93 74-92 2,600 13,500 7.2 32

(280-350) (180) (6,125) (184) (813)

GH-40 17,000 240-330 80-130 79-106 2,600 17,000 8.0 35.4

(300-400) (180) (7,710) (204) (899)

GH-50 20,000 210-280 120+ 92-119 2,600 24,910 8.4 39.7

(350-450) (180) (11,300) (214) (1008)

* “Impact Energy Class” is a marketing rating and does not relate to measured impact energy.

Working weights may vary with bracket configuration. Specifications subject to change without notice.

h7et9sfs Highlight

Item 3 – Vibratory Sheet Pile Driver Excavator Attachment

Compactor /Drivers

Compactor /Drivers

! Oil Splash Lubrication

! Integrated Flow Control and Pressure Relieving Valves

! Optional Backfill Blades

! Optional Narrow Baseplate

! Industry’s Most Comprehensive Field Service Corps

! Extensive Parts Distribution System

! Network of Nearly 300 Distributor Outlets

NPK ATTACHMENTS...designed, built and backed by NPK.NPK ATTACHMENTS...designed, built and backed by NPK.

Greater impulse energy for more compactor/driver productivity!

Greater impulse energy for more compactor/driver productivity!

NPK Compactor/Drivers are designed and built to meet today’s demands for greater jobsite productivity, expanding and enhancing the versatility of your backhoe or excavator.

The leader in trench compaction technology, NPK delivers the industry’s greatest impulse forces with overall superior performance through hydraulically operated rotating eccentric action. Greater vibration forces generate stress waves in granular or loose soil material, bringing the soil’s air to the surface and packing the particles closer together. Greater impulse action works together with the carrier’s downward forces to compact cohesive clay-type soils.

Do more work safely a boom’s length away NPK’s versatile Compactor/Driver can work productively virtually anywhere your excavator or backhoe boom can reach. In trenches, over and around pipe, to the top of piling and sheeting. Next to foundations and around obstructions. Even on steep slopes or rough terrain where conventional rollers and other machines either can’t work or would be hazardous to try. In fact, NPK’s Compactor/Drivers can keep workers a full boom’s length from the compaction or driving action, away from the danger of cave-ins or equipment contact.

Select the NPK Compactor/Driver that’s right for your application NPK’s full selection of Compactor/Drivers gives you the exact power you need for your jobs and jobsite conditions.

The right model for carriers ranging from the smallest mini-excavators and backhoe/loaders to the larger excavators.

Headlining the list of models is NPK’s C-12C, largest and most powerful boom mounted plate Compactor/Driver available anywhere.

Now available on the new C-4C model Compactor/Driver is the optional narrow baseplate. This 18” x 34” baseplate allows the operator to get into even more restricted spaces.

Optional swivel top to minimize carrier repositioning (not available on the Model C-2D), or optional dedicated top brackets available for quick-attach applications.

Heavy-duty, high-efficiency gear motor.

Self-aligning, double row spherical roller bearings.

Oil splash lubrication, eliminates routine greasing.

Rubber shock mounts to isolate vibration.

Direct drive eccentric mass.

Standard baseplate width of 23” and the narrow baseplate width of 18” now available on the C-4C model.

ost saving versatility t at is more t an a promise!

NPK Compactor/Drivers actually deliver on the promise of greater cost-efficiency and jobsite versatility -operating advantages that are absolutely required by today’s contractors and budget-conscious municipalities. tilizing your carrier’s hydraulic system, you save on fuel as well as the need for other costly machines and equipment, using your versatile NPK Compactor/Driver for

Compacting or driving anywhere a boom can go, and often where a man cannot.

Driving pile, wood and aluminum sheeting, fence posts, guardrail posts, rail and I-beams, piling and seawalls, etc.

oil and aggregate compaction.

Trench compaction, as deep as a bucket can dig.

teep slope compaction.

aste compaction at transfer stations, etc.

reaking up frozen coal, salt and other material.

Extracting piling and sheeting.

Swivel feature to avoi machine repositioning NPK’s optional self-aligning swivel can align your Compactor/Driver to nearly any job from nearly any carrier position. ith an excavator positioned over, parallel or perpendicular to the job, you can work productively in tight quarters, narrow trenches next to foundation walls and around manholes or other obstacles. hen it’s not needed, the swivel can be locked in place, either parallel or perpendicular to the boom.

Designe an built for reliability NPK Compactor/Drivers are designed and built for optimum dependability on the most demanding jobsites.

ugged welds, heavy-duty direct drive gear motors, durable rubber shock mounts and self aligning, double row, spherical roller bearings with a heavy-duty roller cage.

ngineere ease of installation

NPK installation kits allow for fast, easy installation with virtually any backhoe and excavator. NPK’s fully engineered installation kits include steel tubes for boom and dipper stick as well as all hydraulic fittings, hoses, valves and instructions, allowing you to switch from bucket to Compactor/Driver to Hammer.

ost saving versatility t at is more t an a promise!

ntegrated flow control and pressure relieving valves protect the motor from e cessive flow and pressure.

Hoses are routed out of the back of the compactor, safely away from the trench wall.

nternally routed hoses for ma imum protection.

Optional backfill blade-vailable on all models. his backfill blade is bolt-on and can be easily removed for trenchwork and transport (note when the backfill blade is removed the backfill blade bracket does not e tend past the baseplate).

COMPACTOR/DRIVERSCOMPACTOR/DRIVERS

More compacting power with excavators and backhoes

NPK Construction Equipment, Inc.

7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free (800) 225-4379 Fax (440) 232-4382 Internet: www.npkce.com

Each product sold by NPK is subject to an express written warranty. NPK makes no other warranty, express or implied, including any warranty of merchantability or fitness for any particular purpose. NPK is not liable for any incidental or consequential damages.

Printed in U.S.A. Form No. B06-0100 (05/09) © Copyright 2009, NPK Construction Equipment, Inc.

Sold and Serviced by:

NPK...All the Right Attachments! With innovation throughout construction’s most extensive line.

Hydraulic Hammers Primary/Secondary Crushers Breaker Buckets Material Processors Heavy Duty Grapples Pedestal Breakers Quick Attach Couplers

Specifications NPK Model C-2D C-4C C-6C C-8C C-10C C-12C

Impulse Force 3,500 lbf 7,800 lbf 16,000 lbf 24,000 lbf 34,000 lbf 45,000 lbf 1,600 kgf 3,550 kgf 7,300 kgf 11,000 kgf 15,450 kgf 20,400 kgf

Cycles per Minute 2400 2100 2200 2200 2200 2200 Oil Flow Required (Standard) 11-13 gpm 18-22 gpm 28-33 gpm 38-43 gpm 40-51 gpm 55-70 gpm

42-49 lpm 68-83 lpm 106-125 lpm 145-160 lpm 150-193 lpm 210-265 lpm (Low Flow Option) Contact NPK

Operating Pressure* 1500-2000 psi 1700-2200 psi 1800-2300 psi 2000-2500 psi 2000-2500 psi 2000-2500 psi 105-140 bar 117-150 bar 125-160 bar 140-170 bar 140-170 bar 140-170 bar

Relief Pressure Setting 2500 psi 2600 psi 2600 psi 2600 psi 2600 psi 2600 psi 170 bar 180 bar 180 bar 180 bar 180 bar 180 bar

Swivel Feature N/A Optional Optional Optional Optional Optional Baseplate Dimensions (Standard) 12 x 25 in 23 x 34 in 29 x 40 in 34 x 46 in 40 x 52 in 45 x 58 in

30.5 x 63.5 cm 58 x 86 cm 74 x 102 cm 86 x 117 cm 102 x 132 cm 114 x 147 cm Compaction Area (Standard) 2.1 sq ft 5.4 sq ft 8.1 sq ft 10.9 sq ft 14.5 sq ft 18.1 sq ft

0.2 sq m 0.5 sq m 0.75 sq m 1.0 sq m 1.3 sq m 1.7 sq m Baseplate Dimensions (Narrow) N/A 18 x 34 in Special Order Special Order Special Order Special Order

46 x 86 cm Compaction Area (Narrow) 4.3 sq ft

0.4 sq m Weight (Fixed Top Bracket 390 lb 910 lb 1650 lb 2240 lb 3530 lb 4350 lb with Standard Baseplate) 177 kg 414 kg 750 kg 1018 kg 1600 kg 1975 kg (Swivel Top Bracket N/A 960 lb 1715 lb 2325 lb 3615 lb 4475 lb with Standard Baseplate) 436 kg 778 kg 1056 kg 1640 kg 2030 kg

(Fixed Top Bracket N/A 870 lb N/A N/A N/A N/A with Narrow Baseplate) 395 kg

(Swivel Top Bracket N/A 920 lb N/A N/A N/A N/A with Narrow Baseplate) 418 kg

Height 28 in 30 in 39 in 45 in 50 in 55 in 711 mm 762 mm 991 mm 1143 mm 1270 mm 1397 mm

Width 12 in 23 or 18 in 29 in 34 in 40 in 45 in 305 mm 584 or 454 mm 736 mm 860 mm 1016 mm 1144 mm

Bracket Inside Width** 7 in 10-1/4 in 12-1/2 in 14-9/16 in Varies with Varies with 178 mm 260 mm 318 mm 370 mm carrier carrier

Recommended 5,000-12,000 lb 10,000-25,000 lb 16,000-42,000 lb 30,000-65,000 lb 60,000-100,000 lb 80,000-140,000 lb Carrier Weight 2,300-5,500 kg 4,500-11,500 kg 7,000-19,000 kg 14,000-29,500 kg 27,000-45,000 kg 36,000-63,500 kg

*Operating pressures shown are with standard hydraulic motor. Operating pressures will be different with optional hydraulic motors.

**Options are available for special applications. Specifications subject to change without notice.

h7et9sfs Rectangle h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight

Highlight

H7PP9CW9

Text Box Attachment will include clamp on bottom to hold Steel Sheet Pile during driving operations

Item 4 – Bulldozer

Typewritten Text h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle

Item 5 – Vibratory Driver

HAMMER & STEEL, INC.

11916 Missouri Bottom Road St. Louis, MO 63042

1-800-325-PILE (7453)

Fax (314) 895-4070 www.hammersteel.com

Model HS-6600 Vibratory Driver / Extractor System

Vibrator Eccentric Moment 6,600 in-lbs (7620 kg-cm)

Frequency 1,600 vpm (1600 vpm)

Centrifugal Force 240 tons (2135 kN)

Amplitude (Free Hanging) 1.23 in (32 mm)

Max Line Pull For Extracting (Variable) 80 tons (710 kN)

Weight (No Clamps or Hoses) 15,250 lbs (6920 kg)

Non-Vibrating Weight 4,550 lbs (2065 kg)

Height (Without Clamp) 100 in (2540 mm)

Length 97 in (2465 mm)

Width 22 in (560 mm)

Throat Width 14.25 in (360 mm)

Hydraulic Hose Length 150 ft (45 m)

Hydraulic Hose Weight 2,250 lbs (1020 kg)

Power Unit Engine Caterpillar 3412TA

Power 750 HP (596 kW)

Operating Speed 1,900 rpm (1900 rpm)

Drive Pressure 5,500 psi (380 bar)

Drive Flow 237 gpm (897 lpm)

Clamp Pressure 5,500 psi (380 bar)

Clamp Flow 6.5 gpm (25 lpm)

Weight (with Full Fluid & Fuel) 22,400 lbs (10,160 kg)

Length 186 in (4725 mm)

Width 66 in (1675 mm)

Height 101 in (2565 mm)

Hydraulic Reservoir 550 gal (2080 I)

Fuel Capacity 240 gal (910 I)

Hydraulic Clamps Standard Universal Clamp Concrete Clamp Casing Clamps w/ 7' Beam Casing Clamps w/11' Beam

Clamping Force 200 tons (1780 kN) 175 tons (1560 kN) 250 tons (2225 kN) 250 tons (2225 kN)

Weight 3,000 lbs (1361 kg) 11.000 lbs (4990 kg) 5,300 lbs (2404 kg) 7,960 lbs (3610 kg)

Length 57 in (1448 mm) 77 in (1955 mm) 110 in (2795 mm) 150 in (3810 mm)

Width 15 in (381 mm) 34 in (865 mm) 13 ¾ in (350 mm) 17 in (435 mm)

Height 37 ¾ in (970 mm) 73 ½ in (1870 mm) 33 ½ in (850 mm) 43 in (1095 mm) h7et9sfs Highlight h7et9sfs Rectangle h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight

Highlight

Optional Item 1 – Sheet Pile Threader

UNIVERSAL SHEET

PILE THREADER

OPERATORS INSTRUCTION MANUAL

AND SPARE PARTS LIST

INNOVATIVE

PILING

EQUIPMENT

HYDRAULIC PILING HAMMERS

EXCAVATOR MOUNTED

VIBRATORS

EXCAVATOR MOUNTED DRILLS

QUIET, VIBRATIONLESS

PUSH-PULL PILING

PILE EXTRACTION

SHEET PILE GUIDE FRAMES

SHEET PILE

CAPPING SYSTEMS

CFA CLEANERS

PILE POINTS

& SPLICERS

HANDLING / LIFTING

www.dcpuk.com

USPT

DAWSON CONSTRUCTION PLANT

WEIGHTS AND DIMENSIONS

Complete assembly - 51Kg

Complete assembly in Aluminium Case - 64Kg

Roller assembly - 27Kg

Threading Head Assembly - 24Kg

Dimensions of Aluminium case - 780x580x400

Contents of case

1x Roller assembly

1x Threading head assembly

1x Instruction C.D

1x Instruction manual

1x Allen key 14mm

1x Allen key 10mm

1x Allen key 8mm

1x Allen key 3mm

1x Tommy bar

1x 5mm Packer plate

1x Hard point

H7PP9CW9

Text Box Sheet Pile Threader must be compatible with SKZ 25 Steel Sheet Pile.

Optional Item 2 – Ground Release Sheet Pile Shackle h7et9sfs Rectangle h7et9sfs Rectangle