W911SD-20-R-0014 SOW Deviations Uniform Buttons FY 20 LRC.pdf

98 KB Posted

Attached to
USMA Uniform Buttons
Solicitation number
W911SD-20-R-0014
Issued by

View the file

Other files

File Type Posted
W911SD-20-R-0014 SOW & Specifications Uniform Buttons FY 20 LRC.pdf PDF
W911SD-20-R-0014 MRR SOURCES SOUGHT LH NOTICE Uniform Buttons.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AMSAS-OMI-W

Deviations To

MIL-DTL-1563C (DTD 8 October 1997) Buttons, Insignia and Findings (USMA)

1. Detail 5A, Insignia, USMA, Button, Ball 30 Ligne.

A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.

To: Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.

2. Detail 6A, Insignia, USMA, Button, 25 Ligne.

A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.

To: Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition

3. Detail 7A, Insignia, USMA Button, 36 Ligne.

A) Change Note 2: From: The attaching device shall be stem and backshell type and shall conform to the dimensions shown above.

To: The attaching device shall be stem and concave backshell type and shall conform to the dimensions shown above.

B) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.

To: Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition

C) Change Note 5: Add: 7/32 inch or 0.56 cm.

4. Detail 10A, Insignia, USMA Button, 30 Ligne.

A) Change Note 3: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.

To: Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.

B) Add Dash Numbers: Add: -1, stem, Gold polished finish Add: -2, stem, Nickel polished finish.

5. Detail 20A, Insignia, USMA, Ball, 30 Ligne with Tack Back.

A) Change Note 3: From: The tack back shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.

To The tack back shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.

File details come from the government source that posted it. Updated .