Spacific_Tasks.docx

14 KB Posted

Attached to
Hanger Door Repairs & Maintenance
Solicitation number
W911RX-17-B-0004
Issued by

About this file

From the source

Specific Requirements on project

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services. The Contractor shall repair all hanger bay doors back to manufacturer specifications.

5.2. Task.

1. The Contractor shall complete the following tasks on Door #1

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall complete the following tasks on Door #2

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall complete the following tasks on Door #3

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall complete the following tasks on Door #4

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. Remove and Clean Oil off parts on Sprocket

1. The Contractor shall complete the following tasks on Door #5

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall complete the following tasks on Door #6 . 1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall complete the following tasks on Door #7

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain.

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. Replace Electrical Collector and Mounting Bracket.

1. Replace Pillar Block Bearings.

1. Replace Drive Shaft Bearings.

1. The Contractor shall complete the following tasks on Door #8

1. Replace Motor Gearbox assembly.

1. Replace Drive Chain..

1. Replace 2 set screw Ball Bearings.

1. Replace Normal Duty Pillow Block.

1. Reinstall Torque Limiter Sprocket on Gearbox.

1. Modify existing door panel for Sprocket clearances.

1. Replace Door Locks for Motor Panel.

1. The Contractor shall ensure all work meets Manufactures Specification.

1. Install a new quick disconnect at ground level at the base of the ladder on the South side of the building.

1. Electrical track will be cleaned and serviced per manufacturer specification.

File details come from the government source that posted it. Updated .