B01_-_Provisions_and_Clauses_Full-Text_Attachment.docx

W911QX-19-Q-0121

Provisions and Clauses Full-Text Attachment 52.204-16 --Commercial and Government Entity Code Reporting.

(a) Definition. As used in this provision— “Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

(b) The Offeror shall enter its CAGE code in its offer with its name and address or otherwise include it prominently in its proposal. The CAGE code entered must be for that name and address. Enter “CAGE” before the number. The CAGE code is required prior to award.

(c) CAGE codes may be obtained via –

(1) Registration in the system for Award management (SAM) at www.sam.gov. If the Offeror is located in the United States or its outlying areas and does not already have a CAGE code assigned, the DLA Commercial and Government Entity (CAGE) Branch will assign a CAGE code as a part of the SAM registration process. SAM registrants located outside the United States and its outlying areas shall obtain a NCAGE code prior to registration in SAM (see paragraph (c)(3) of this provision).

(2) The DLA Commercial and Government Entity (CAGE) Branch. If registration in SAM is not required for the subject procurement, and the offeror does not otherwise register in SAM, an offeror located in the United States or its outlying areas may request that a CAGE code be assigned by submitting a request at https://cage.dla.mil.

(3) The appropriate country codification bureau. Entities located outside the United States and its outlying areas may obtain an NCAGE code by contacting the Codification Bureau in the foreign entity’s country if that country is a member of NATO or a sponsored nation. NCAGE codes may be obtained from the NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx if the foreign entity’s country is not a member of NATO or a sponsored nation. Points of contact for codification bureaus, as well as additional information on obtaining NCAGE codes, are available at http://www.nato.int/structur/AC/135/main/links/contacts.htm.

(d) Additional guidance for establishing and maintaining CAGE codes is available at https://www.cage.dla.mil.

(e) When a CAGE Code is required for the immediate owner and/or the highest-level owner by 52.204-17 or 52.212-3(p), the Offeror shall obtain the respective CAGE Code from that entity to supply the CAGE Code to the Government.

(f) Do not delay submission of the offer pending receipt of a CAGE code.

(End of Clause) 52.204-18 --Commercial and Government Entity Code Maintenance (Jul 2016)

(a) Definition. As used in this clause— “Commercial and government Entity (CAGE) code” means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or Government entity, or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as the NATO CAGE (NCAGE) code.

(b) Contractors shall ensure that the CAGE code is maintained throughout the life of the contract. For contractors registered in the System for Award Management (SAM), the DLA Commercial and Government Entity (CAGE) Branch shall only modify data received from SAM in the CAGE master file if the contractor initiates those changes via update of its SAM registration. Contractors undergoing a novation or change-of-name agreement shall notify the contracting officer in accordance with subpart 42.12. The contractor shall communicate any change to the CAGE code to the contracting officer within 30 days after the change, so that a modification can be issued to update the CAGE code on the contract.

(c) Contractors located in the United States or its outlying areas that are not registered in SAM shall submit written change requests to the DLA Commercial and Government Entity (CAGE) Branch. Requests for changes shall be provided at https://cage.dla.mil . Change requests to the CAGE master file are accepted from the entity identified by the code.

(d) Contractors located outside the United States and its outlying areas that are not registered in SAM shall contact the appropriate National Codification Bureau (points of contact available at http://www.nato.int/structur/AC/135/main/links/contacts.htm) or NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx.

(e) Additional guidance for maintaining CAGE codes is available at https://cage.dla.mil.

52.213-2 Invoices As prescribed in 13.302-5(b), insert the following clause:

Invoices (APR 1984) The Contractor's invoices must be submitted before payment can be made. The Contractor will be paid on the basis of the invoice, which must state (a) the starting and ending dates of the subscription delivery, and (b) either that orders have been placed in effect for the addressees required, or that the orders will be placed in effect upon receipt of payment.

(End of clause) 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors.

(a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor.

(b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act.

(c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

(End of Clause) 52.252-2 Clauses incorporated by reference As prescribed in 52.107(b), insert the following clause:

Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR:

https://www.acquisition.gov/browse/index/far

DFARS:

https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DFARS PGI:

https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

AFARS:

https://spcs3.kc.army.mil/asaalt/procurement/AFARS/Home.aspx

(End of clause)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016)

(a) The Contractor shall not release to anyone outside the Contractor's organization any unclassified information, regardless of medium (e.g., film, tape, document), pertaining to any part of this contract or any program related to this contract, unless—

(1) The Contracting Officer has given prior written approval;

(2) The information is otherwise in the public domain before the date of release; or

(3) The information results from or arises during the performance of a project that involves no covered defense information (as defined in the clause at DFARS 252.204-7012) and has been scoped and negotiated by the contracting activity with the contractor and research performer and determined in writing by the contracting officer to be fundamental research (which by definition cannot involve any covered defense information), in accordance with National Security Decision Directive 189, National Policy on the Transfer of Scientific, Technical and Engineering Information, in effect on the date of contract award and the Under Secretary of Defense (Acquisition, Technology, and Logistics) memoranda on Fundamental Research, dated May 24, 2010, and on Contracted Fundamental Research, dated June 26, 2008 (available at DFARS PGI 204.4).

(b) Requests for approval under paragraph (a)(1) shall identify the specific information to be released, the medium to be used, and the purpose for the release. The Contractor shall submit its request to the Contracting Officer at least 10 business days before the proposed date for release.

(c) The Contractor agrees to include a similar requirement, including this paragraph (c), in each subcontract under this contract. Subcontractors shall submit requests for authorization to release through the prime contractor to the Contracting Officer.

(End of clause) 252.204-7003 Control of government personnel work product.

As prescribed in 204.404-70(b), use the following clause:

Control of Government Personnel Work Product (APR 1992) The Contractor's procedures for protecting against unauthorized disclosure of information shall not require Department of Defense employees or members of the Armed Forces to relinquish control of their work products, whether classified or not, to the contractor.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

INVOICE & RECEIVING REPORT (COMBO)

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Michael J. Adams; michael.j.adams214.civ@mail.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

ACC - APG POINT OF CONTACT

The ACC - APG point of contact for this action is:

Contract Specialist: Nicole G. Hernandez Telephone Number: 575-678-4979 E-mail: Nicole.g.hernandez2.civ@mail.mil

Contracting Officer Name: Jessica R. Camunez Telephone Number: 575-678-8283 E-mail: Jessica.r.camunez.civ@mail.mil

(End of Clause)

TECHNICAL POINT OF CONTACT

TPOC Name: TBD at Award Telephone Number: TBD at Award Email: TBD at Award

(End of Clause)

INTENT TO SOLICIT ONLY ONE SOURCE

The proposed contract action is for supplies or services for which the Government is soliciting and negotiating with only one source under the authority of [P-1 insert either FAR 6.302, FAR 13.106-1(b)(1)(i), or FAR 13.501(a) as applicable]. The name of the company the Government intends to award a contract to COMSOL, Inc. 100 District Avenue Burlington, MA 01803. This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received prior to the closing date and time of this solicitation.

(End of Clause)

TYPE OF CONTRACT (SEP 1999)

This is a Firm Fixed Price (FFP) type of contract.

(End of Clause)

GOVERNMENT INSPECTION AND ACCEPTANCE

Government Inspection and Acceptance shall be performed at Aberdeen Proving Grounds, 6375 Johnson Road, APG, MD 21005. by an authorized Government Representative.

(End of Clause)

PAYMENT OFFICE (BANKCARD - INVOICES REQUIRED)

Invoice:

The Contractor shall submit their invoice, via email, to the following address:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The Contractor shall include the contract number and invoice number in the subject line of the email.

The invoice must include all of the following:

1. Name, address, and phone number of the Contractor / Vendor.

4. Include the Contract Line Item number with the associated description, quantity, unit price, and extended price of supplies delivered or services performed.

9. Any other pertinent information or documentation required by the contract (such as evidence of shipment.)

The bankcard invoice processing office will not process partial payments on contracts for supply items where the delivery date is constant. All partial payment schedules must be obtained through the contacting officer with the appropriate clauses included in the contract.

The invoice will be forwarded by the Bankcard Invoice Processing Office personnel to the procuring activity’s Technical Representative for approval, and then will be paid by bankcard.

Receiving Report:

The Technical Point of Contact (TPOC)/Contracting Officer’s Representative (COR) listed in this contract shall submit a receiving report, via email, to the following address once all supplies/services have been delivered/performed:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The receiving report must include all of the following:

(End of Clause)

TAX EXEMPTION CERTIFICATE (ARL)

Exemption certificate number 30005004 covers exemption from Maryland retail sales and use tax.

The Federal Tax Identification number for the Army Research Laboratory is: 53-0215803.

RECEIVING ROOM REQUIREMENTS - ALTERNATE I (APG)

At ABERDEEN PROVING GROUNDS truck shipments are accepted Monday through Friday (except holidays) from 8:00 AM to 3:30 PM only at Shipping and Receiving 6375 Johnson Road, APG, MD 21005. Suppliers shall affix packing slips to the outside of any packages delivered under this contract. Packing slips must be clearly identified and easy to retrieve enclosed packing papers. To coordinate/schedule deliveries, contact Bldg. 321 at 410-278-4406.

(End of Clause)

EXCEPTIONS OR CONDITIONS CONTAINED IN OFFEROR'S PROPOSAL

In the event the offeror takes any exceptions to, or sets any conditions for its proposal under the subject solicitation, such exceptions or conditions shall be set forth in a cover letter to the offeror's proposal.

(End of Clause)

AWARD OF CONTRACT

No award will be made for less than the full quantities solicited. Any offeror proposing less than the full quantities will be considered nonresponsive.

(End of Clause)

ADELPHI CONTRACTING DIVISION WEBSITE

Offeror(s) may access the Adelphi Contracting Division website at: http://www.arl.army.mil/www/default.cfm?page=509

(End of Clause)

PAYMENT TERMS

Payment terms of less than net thirty (30) days are unacceptable. Offers conditioned upon such terms will not be considered for award.