A01_-_Salient_Characteristicslaunch_packages.doc

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

The Government requires the fabrication of the following items:

1. 500 each, Four petal sabots per ARL(Army Research Laboratory) Drawing number 140114

a. Material shall be polypropylux 944 or Homopolymer Polypropylene

b. Outside and inside diameters to be parallel and concentric within 0.003” T.I.R. (Total Indicator Readout)

c. Linear tolerances shall be +/- 0.020” unless otherwise noted

d. The four petals shall be held together with two wraps of tape in the tape bands upon completion

2. 500 each, Four petal sabots per ARL(Army Research Laboratory) Drawing number 200026

a. Material shall be polypropylux 944 or Homopolymer Polypropylene

b. Outside and inside diameters to be parallel and concentric within 0.003” T.I.R. (Total Indicator Readout)

c. Linear tolerances shall be +/- 0.020” unless otherwise noted

d. The four petals shall be held together with two wraps of tape in the tape band upon completion

3. 1000 each, Obturators per ARL(Army Research Laboratory) Drawing number 95009

a. Material shall be polypropylux 944 or Homopolymer Polypropylene

b. All outside diameters to be parallel and concentric within 0.003” T.I.R. (Total Indicator Readout)

c. Linear tolerances shall be +/- 0.020” unless otherwise noted

d. Bottom of cavity to be square with center axis of cavity within +/-/0.002”

4. Completed items shall be shipped to the following address:

a. U.S.Army Research Laboratory, Attention: David Schall, B321 Colleran Rd. Aberdeen Proving Ground, MD 21005

5. Delivery of items shall be no later than 60 days after contract award

Contracting Officer:

Template last updated 07/28/2016