Statement_of_Work_Loaders.docx

IML-E

STATEMENT OF WORK

Purchase of Two (2) CAT 926M or Equivalent

Current wheel loader has been turned in due to inoperability and is needed for snow removal and grounds maintenance.

SPECIFICATIONS FOR CAT 926M OR EQUIVILENT

POWER TRAIN

Axle seal guards Auto idle shut down feature Cat C7.1 ACERT engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and after cooled – Diesel particulate filter (Fit for Life) Coolant protection to –34° C (–29° F) Differential lock in front axle Dry type air cleaner Enclosed wet disc full hydraulic brakes Fuel priming pump, automatic Fuel water separator Hydraulically driven demand cooling fan Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed Lubed for life driveshafts Parking brake, electric Wide spaced 6 fins per inch cooling package S·O·SSM sampling ports Throttle lock and maximum speed limiter

HYDRAULICS

Automatic lift, lower and tilt kickouts Bucket and Fork Modes, adjustable in-cab Cylinder damping at kickout and end stops Fine Mode control in Fork Mode Hydraulic Response setting Load sensing hydraulics and steering Seat-mounted hydraulic joystick controls

ELECTRICAL

Alternator, 115-amp, heavy duty 12V power supply in cab (2) Batteries, 1,000 CCA (2) 24 volt system Back-up alarm Emergency shutdown switch Heavy duty gear reduction starter Product Link PRO with subscription Remote jump start post Resettable critical function breakers

OPERATOR ENVIRONMENT

75 mm (3 in) retractable seat belt, with audible alarm and indicator Automatic temperature control Cab, enclosed and pressurized Cup holders External heated mirrors with lower parabolic Ground level cab door release Gauges: – Digital hour, odometer, tachometer, ground speed and direction indicator Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge Hydraulic control lockout Interior cab lighting, door and dome Interior rearview mirrors (2) required Operator warning system indicators Radio ready speakers Rear window defrost, electric required Seat-mounted controls, adjustable Sliding glass on the side windows Column mounted multi-function control – lights, wipers, turn signal Suspension seat, fabric Tilt and telescopic steering wheel Wet arm wiper/washer, front and rear

OTHER STANDARD EQUIPMENT

Large-access enclosure doors Parallel lift loader linkage Recovery hitch with pin Remote mounted lubrication points Lockable compartments and enclosures

NOTES

Hydrostatic transmission required One Loader with Bucket, GP, 2.75 YD3, FUS, BOCE (general purpose bucket) is required.

One Loader with Bucket, 2.75 YD multi bucket (multi-purpose bucket) is required.

Operator, Parts, and Service Manuals (printed and CD Rom) required for each unit