STATEMENT_OF_WORK.pdf
PDF 187 KB Posted
- Attached to
- Stainless Steel Shot
- Solicitation number
- W911KF-17-Q-0054
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911KF-17-Q-0054_Solicitation_Attachments.pdf | ||
| W911KF-17-Q-0054_Solicitation_30_Aug_2017.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
STAINLESS STEEL CUT WIRE SHOT
24 MAY 2017
1. Contractor shall provide stainless steel cut wire for shot blasting to Anniston Army Depot in accordance with the Society of Automotive Engineers (SAE) Standards. SAE J441, “Wire, Cut, Shot,” was adopted on 3 October 94 for use by the Department of Defense (DoD). SAE J441 latest revision date is June 93. Anniston Army Depot’s requirement is for cut wire only. No rounded or conditioning allowed.
2. Chemical Analysis:
Carbon: 0.15 max Manganese: 2.00 max Phosphorus: 0.045 max Sulphur: 0.0.0 max Silicon: 1.00 max Chromium: 17.00 to 20.00 Nickel: 8.00 to 10.50
Contractor shall comply with the Chemical Analysis above, stainless steel cut wire must contact a percentage of each chemical or your quotation shall be determined non-responsive.
3. Size required is 0.041 – 0.042 inches in diameter. Please refer to the attached standard SAE J441.
4. Tensile Properties: (See table 2 in SAE J441)
5. Hardness: Stainless cut wire shot shall have a minimum hardness of 466 KHN (45HRC) IAW SAE J441.
6. Size Classification: (See tables 1,3, and 4) IAW SAE J441.
7. Inspection Procedures: (Refer to SAE J441)
8. Soundness: (Refer to SAE J441)
9. Packaging: Stainless steel cut wire shot shall be packaged in accordance with supplier’s commercial practice in a manner to assure protection against damage from the supply source to the using activity. Unless otherwise specified, stainless steel cut wire shot shall be packed in unit quantities of twenty-five (25) pounds, fifty (50) pounds or one hundred (100) pounds.
10. Requirement: The prospective vendor shall provide a sample of the cut wire shot that weighs about 2 pounds, for in-house testing: Send the same, certificate of analyses that show the samples are within the chemical analysis ranges specified above including particle/shot size, and the Safety Data Sheet (SDS) to the following address:
Anniston Army Depot Materials Lab, Bldg. 128 Attn: Doug Swain 7 Frankford Ave.
Anniston, AL 36201
Final award, of deliveries in 24,000 pound increments, will be determined upon approval of initial 2 pound sample.
11. Additionally, the vendor shall provide a sample of the cut wire shot with each shipment that weighs about 2 pounds, for in-house testing: Send the same, certificate of analyses that show the samples are within the chemical analysis ranges specified above including particle/shot size, and the Safety Data Sheet (SDS) to the following address:
Anniston Army Depot Materials Lab, Bldg. 128 Attn: Doug Swain 7 Frankford Ave.
Anniston, AL 36201
File details come from the government source that posted it. Updated .